[Serusers] Sems Error

Shirley shirleytoh at jpcomputers.com.sg
Thu Apr 8 06:05:15 CEST 2004


Hi, 

Thank you for your prompt reply.
I have  tested :~ set log_stderr=yes and fork=no and debug=3 in sems.conf. I
have attached the log. Please help.

 <<SemsError1.txt>>  <<sems.conf>> 
I have also tested this ps ax | grep sems. I get this result:~
[root at sipserver2 root]# ps ax | grep sems
 5518 ?        S      1:25 gedit file:///etc/sems/sems.conf
 7805 pts/0    S      0:00 grep sems

Regards, 
Shirley

> -----Original Message-----
> From:	Ulrich Abend [SMTP:ullstar at iptel.org
> Sent:	Thursday, April 08, 2004 12:18 AM
> To:	Shirley
> Cc:	serusers at lists.iptel.org
> Subject:	Re: [Serusers] Sems Error
> 
> Hi,
> 
> try to set log_stderr=yes and fork=no and debug=3 in sems.conf for
> testing, it 
> should produce a lot of debugging output on your console when starting up.
> 
> There are a lot of possible reasons for SEMS not starting, please post the
> 
> debugging output either from the commands above or from /var/log/syslog 
> (under redhat the file might be another one under /var/log/ ...)
> 
> You can also check is sems runs by calling in your shell:
> 
>  ps ax | grep sems
> 
> Regards,
> 
> Uli.
> 
> P.S.: Please always CC to the list, others might answer quicker than me
> :-)
> 
> On Wednesday 07 April 2004 14:43, Shirley wrote:
> > Hi,
> >
> > Thank you for your reply. How to make sure that the SEMS is running?
> > I uses the /usr/local/sin/sems.redhat start- to start the sems service?
> Am
> > I correct?
> > My fifo name is same in both file that you mention. Please advice!
> Thanks
> >
> > Regards,
> > Shirley
> >
> > > -----Original Message-----
> > > From:	Ulrich Abend [SMTP:ullstar at iptel.org]
> > > Sent:	Wednesday, April 07, 2004 8:00 PM
> > > To:	serusers at lists.iptel.org
> > > Cc:	Shirley
> > > Subject:	Re: [Serusers] Sems Error
> > >
> > > Hi,
> > >
> > > you should make shure, SEMS is running and uses the same fifo name (in
> > > sems.conf) as SER (in ser.cfg).
> > >
> > > It is also important, that the fifo file (default: /tmp/am_fifo) has
> > > write
> > >
> > > permissions for the user SER runs as. The easiest setup is to run SER
> and
> > > SEMS as the same user.
> > >
> > > If you still experience problems, please post SER and SEMS debugging
> > > output,
> > > the config files, and the results of
> > > ls -la /tmp/*fifo
> > >
> > > Regards,
> > >
> > > Uli.
> > >
> > > On Wednesday 07 April 2004 12:28, Shirley wrote:
> > > > Hi all,
> > > >
> > > > Please Help!!! I am trying to install the sems when I try to start
> the
> > >
> > > sems
> > >
> > > > I encountered this problem as per below. I am running on Linux 9.0
> and
> > > > please also advice on how to check the fifo version....Thanks
> > > >
> > > > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR:
> > > > voicemail: ans_machine deamon is not running !
> > > > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR:
> > > > voicemail:
> > >
> > > No
> > >
> > > > such device or address
> > > > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR:
> vm_start:
> > > > write_to_fifo failed
> > > > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR:
> > > > voicemail: ans_machine deamon is not running !
> > > > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR:
> > > > voicemail:
> > >
> > > No
> > >
> > > > such device or address
> > > > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR:
> vm_start:
> > > > write_to_fifo failed
> > > >
> > > > regards,
> > > > shirley
> > > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: SemsError1.txt
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040408/0d0229ec/attachment.txt>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sems.conf
Type: application/octet-stream
Size: 3422 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040408/0d0229ec/attachment.obj>


More information about the sr-users mailing list