[Serusers] Troubles setting up radius authentication

Steve Dolloff sdolloff at noc.dls.net
Tue Sep 23 18:39:53 CEST 2003


This is my current info.

ser -V
version: ser 0.8.12dev-t16 (i386/linux)
flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK,
SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535
@(#) $Id: main.c,v 1.167 2003/07/07 14:08:26 jiri Exp $
main.c compiled on 10:02:36 Sep 11 2003 with gcc 3.2

this was built from source off of CVS.  If there is a newer version that
would give more info, I will recompile.

Stephen


Hello,

>From the information below I can't say where the problem is, but I would
say some attribute definitions are missing.

Unfortunatelly the stable version of auth_radius module doesn't print
much debugging messages when something goes wrong.

Did you compile your server from sources or do you use binary packages ?
You can try unstable version branch from the CVS, that should tell you
where the problem is, or I can send you a patch to stable version if you
can apply it and compile from sources.

  Jan.

On 23-09 11:24, Steve Dolloff wrote:
> Yes, I have added the SIP definitions to the radiusclient library.  It
> is the dictionary file defined in the radiusclient.conf file as
> /etc/sip_dictionary.  It was created using the dictionary file from
> radiusclient and adding the information from the link that you refered
> to.
> 
> -----------------------
> 
> Hello,
> 
> if there is no radius traffic then radiusclient library has some
> problems when buiding the request. Did you extend your radius
dictionary
> as described in http://iptel.org/ser/ser_radius.html ?
> 
>   Jan.
> 
> On 23-09 10:38, Steve Dolloff wrote:
> > I am trying to switch from database authentication to radius
> > authentication.
> > 
> > I have compiled and installed the module.
> > 
> > I have added the following to my ser.cfg
> > 
> > modparam("auth_radius", "radius_config",
"/etc/ser/radiusclient.conf")
> > modparam("auth_radius", "service_type",15)
> > 
> >                         if (method=="REGISTER") {
> >                                 log(1,"authenticating");
> >                                 if
(!radius_www_authorize("test.net"))
> {
> >                                         log(1,"radius auth
failure");
> >                                         www_challenge("test.net",
> "0");
> >                                         break;
> >                                 };
> > 
> > I have configured the following in /etc/ser/radiusclient.conf
> > authserver      radius1.test.net:1812
> > authserver      radius2.test.net:1812
> > servers         /etc/servers
> > dictionary      /etc/sip_dictionary
> > 
> > I have configured the following in /etc/servers
> > 
> > Radius1.test.net	secret
> > Radius2.test.net	secret2
> > 
> > I get the following in my messages log.
> > 
> > Sep 23 10:39:03 voip2 /usr/sbin/ser[25945]: authenticating
> > Sep 23 10:39:03 voip2 /usr/sbin/ser[25945]: radius auth failure
> > Sep 23 10:39:30 voip2 /usr/sbin/ser[25947]: authenticating
> > Sep 23 10:39:30 voip2 /usr/sbin/ser[25947]: radius auth failure
> > Sep 23 10:39:30 voip2 /usr/sbin/ser[25949]: authenticating
> > Sep 23 10:39:30 voip2 /usr/sbin/ser[25949]: radius auth failure
> > Sep 23 10:39:34 voip2 /usr/sbin/ser[25948]: authenticating
> > Sep 23 10:39:34 voip2 /usr/sbin/ser[25948]: radius auth failure
> > Sep 23 10:39:34 voip2 /usr/sbin/ser[25945]: authenticating
> > Sep 23 10:39:34 voip2 /usr/sbin/ser[25945]: radius auth failure
> > 
> > And ngrep port 1812 shows no traffic at all.  Where are these auth
> > request going?  How can I get more debug info?
> > 
> > Thanks for your help.
> > 
> > Stephen
> > 
> > 
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers




More information about the sr-users mailing list