[Serusers] Questions about address SIP numeric ans gateway sip-PSTN???

Hassan CHOUMAR Hassan.Choumar at int-evry.fr
Mon Sep 15 16:38:02 CEST 2003


  Hello all, 
  I installed serweb, it works well, but I have a problem at the level of the> 
  application:
  Another question, if I want to try to make communications between a
 softphone
  SIP and an analogical telephone through a cisco router, it is enough to go
  the commands this below into the cisco router, and the others into the
 server
  SER:

For that of an entering call has fault Gateway is indeed but that of the call 
taking out that is call of a softphone towards an analogical device I did not 
manage to realize it. 
 
  In the router:
 
 Dial-peer voice 999 voip 
 Destination-pattern 555999. ** Associate the number arranges 555-9990 to 9999
 
 with our SIP server
 Session protocol sipv2 ** Set this dial-peer to uses(wears out) SIP instead
 of 
 Cisco protocols
 Session target sip-server ** Send the call to our SIP server. See SIP-UA
 below
 Codec g711ulaw ** Set the default codec to 711-Ulaw (common codec between 
 customers)
 !
 Sip-ua
 Sip-server ipv4:192.168.0.1 
 
  
  
  In the file ser.cfg :
 if (uri=~"^sip:9[0-9]*@mydomain.com") { ## This assumes that the caller is 
 log("Forwarding to PSTN\n"); ## registered in our realm
 t_relay_to( "192.168.0.2", "5060"); ## Our Cisco router
 break;
 };
  
 thanks you for advance
 hassan
  
 

-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/




More information about the sr-users mailing list