[Serusers]SIP Gateway

Director General: NEFACOMP dg at nefacomp.net
Mon Oct 27 16:23:05 CET 2003 

Hi,
I have received it but I couldn't reply because I am not in town now.
I will check tomorrow to see if I can help.


Thanks
Emery
----- Original Message -----
From: "Sesha B" <sesha at iic.com>
To: "Director General: NEFACOMP" <dg at nefacomp.net>
Sent: Monday, October 27, 2003 17:05
Subject: RE: [Serusers]SIP Gateway


> I'm sorry to trouble you again and again, but did you get the mail I sent
> you earlier about my setup? Please let me know if you found anything wrong
> with the setup or the config? Thank you very much.
>
> Sesha
>
> -----Original Message-----
> From: Director General: NEFACOMP [mailto:dg at nefacomp.net]
> Sent: Friday, October 24, 2003 7:06 AM
> To: sesha at iic.com; serusers
> Subject: Re: [Serusers]SIP Gateway
>
>
> You asked:
>     >> Does the mediatrix be assigned a number too?
> Can you explain?
> Normally each port on the Mediatrix is like a UA (like Xten, ... [I might
be
> wrong!!])
> That is why, the account you tell it to use should be created in SER
first.
>
> NGREP can be found at http://ngrep.sourceforge.net/
> After installing it you may use [>>>>>ngrep port 5060] to watch the
traffic
> on port 5060.
>
> When you get the dial tone, what do you do with it? Normally you should be
> able to dial a number to call.
> For example if the Xten software is running on your PC and registered to
use
> 500 as main alias, after getting the dial tone (with the phone connected
to
> the Mediatrix) you may dial 500 without hanging up and your UA will start
> ringing on the PC.
>
> Can you tell me in more details how your devices are interconnected?
>
>
> Thanks
> Emery
> ----- Original Message -----
> From: "Sesha B" <sesha at iic.com>
> To: "Director General: NEFACOMP" <dg at nefacomp.net>
> Sent: Thursday, October 23, 2003 16:58
> Subject: RE: [Serusers]SIP Gateway
>
>
> > The analog gateway ID is in readonly mode in my MIB and it is set to 5
by
> > default. I have disabled the redirection and I get the dialtone after
two
> > rings. And with the original configuration I have, I get the engage tone
> > after two rings. I have one question! Does the mediatrix be assigned a
> > number too? Also, can you please let me know how do use ngrep to watch
the
> > registration headers on the SER registrar? Thank you.
> >
> > Sesha
> >
> > -----Original Message-----
> > From: Director General: NEFACOMP [mailto:dg at nefacomp.net]
> > Sent: Thursday, October 23, 2003 10:01 AM
> > To: sesha at iic.com
> > Subject: Re: [Serusers]SIP Gateway
> >
> >
> > I also have another question about your device:
> >     analogGatewayID (.1.3.6.1.4.1.4935.1.1.1.4.1.2.0) = 5
> >
> > The above line says that your gateway ID is 5. It seems it is different
> from
> > mine. Mine is 2.
> > Possibly I won't be of much help to you. But we can always try.
> >
> > Can you remove the redirection and see if it works?
> >     gatewayPort1RedirectEnable (.1.3.6.1.4.1.4935.1.1.1.4.1.14.10.2.0) =
0
> > ////// Just disable the redirection to see if that helps
> >     gatewayPort1RedirectToAddress
(.1.3.6.1.4.1.4935.1.1.1.4.1.14.10.3.0)
> =
> > x.x.x.x
> >     gatewayPort1NetToPstnSourceFilter
> > (.1.3.6.1.4.1.4935.1.1.1.4.1.14.10.4.0) = 24.105.144.220
> >
> > For the remaining parts, I don't see any difference with my
configurations
> > (except that you are using country codes while me I have disabled them)
> >
> >
> > Thanks
> > Emery
> > ----- Original Message -----
> > From: "Sesha B" <sesha at iic.com>
> > To: "Director General: NEFACOMP" <dg at nefacomp.net>
> > Sent: Thursday, October 23, 2003 14:32
> > Subject: RE: [Serusers]SIP Gateway
> >
> >
> > > I'm attaching my getwalk from the branch voipgateway, which includes
> > > everything. The phone I was mentioning earlier is the SIP phone into
> which
> > > I'm trying to dial from the regular phones on the PBX. I've the
> mediatrix
> > on
> > > 4 ports on the PBX. Thank you.
> > >
> > > -----Original Message-----
> > > From: Director General: NEFACOMP [mailto:dg at nefacomp.net]
> > > Sent: Thursday, October 23, 2003 4:40 AM
> > > To: sesha at iic.com; serusers
> > > Subject: Re: [Serusers]SIP Gateway
> > >
> > >
> > > What phone?
> > > Can you send me the GetWalk generated by your Unit?
> > >
> > >
> > > Thanks
> > > Emery
> > > ----- Original Message -----
> > > From: "Sesha B" <sesha at iic.com>
> > > To: "Director General: NEFACOMP" <dg at nefacomp.net>;
<serusers at lists.iptel.org>
> > > Sent: Thursday, October 23, 2003 00:34
> > > Subject: RE: [Serusers]SIP Gateway
> > >
> > >
> > > > I have these parameters already set. I also restarted mediatrix
after
>
> > > > setting these MIB variables but I can see only the SIP phone
> registering
> > > > with the SER in the ser diagnostics but I dont see the SIP gateway's
> > > address
> > > > at all !!!
> > > >
> > > > -----Original Message-----
> > > > From: Director General: NEFACOMP [mailto:dg at nefacomp.net]
> > > > Sent: Wednesday, October 22, 2003 10:47 AM
> > > > To: sesha at iic.com; serusers at lists.iptel.org
> > > > Subject: Re: [Serusers]SIP Gateway
> > > >
> > > >
> > > > I will send instructions for the first port and you will be able to
do
> > the
> > > > same for the other ports.
> > > >
> > > > In the provisioning MIB, find the key:
> > > >     sipMib -> sipUAGroup
> > > > Start by configuring the SER address:
> > > >     sipMib -> sipUAGroup -> sipUAServerGroup ->
sipUAServerStaticGroup
> > > >     and configure the parameters therein. Such as Registrar Host,
Port
> > ...
> > > >
> > > > Second, configure the port 1 as follows:
> > > >     sipMib -> sipUAGroup -> sipUA1Group
> > > >     configure the main alias entry which should be the account
created
> > on
> > > > the SER server for that port
> > > >     you may even configure other things if needed such as other
> aliases,
> > > > ....
> > > > For other ports, just replace # in sipUA#Group by the correct port
> > number
> > > > (2, 3 or 4)
> > > >
> > > > Also, you may need to enable some options in the provisioningMib
key.
> > > >
> > > >
> > > > Thanks
> > > > Emery
> > > > ----- Original Message -----
> > > > From: "Director General: NEFACOMP" <dg at nefacomp.net>
> > > > To: <sesha at iic.com>; <serusers at lists.iptel.org>
> > > > Sent: Wednesday, October 22, 2003 15:53
> > > > Subject: Re: [Serusers]SIP Gateway
> > > >
> > > >
> > > > > I was asking the firmware version (the software installed on the
> > 1204).
> > > > Not
> > > > > the Unit Manager.
> > > > >
> > > > > I am going to send you instructions on how to set up accounts in
the
> > > unit.
> > > > > These are accounts the unit uses in registering with the SER
server.
> > > > > Note that you will need to configure the same accounts within SER.
> > > > >
> > > > >
> > > > > Thanks
> > > > > Emery
> > > > > ----- Original Message -----
> > > > > From: "Sesha B" <sesha at iic.com>
> > > > > To: "Director General: NEFACOMP" <dg at nefacomp.net>;
> > <serusers at lists.iptel.org>
> > > > > Sent: Wednesday, October 22, 2003 14:55
> > > > > Subject: RE: [Serusers]SIP Gateway
> > > > >
> > > > >
> > > > > > Hi,
> > > > > > I'm using Unit Manager Express version 1.1.1.5 to configure
> > Mediatrix
> > > > > 1204.
> > > > > > I have configured it to use SIP. I am confused about setting up
> > > accounts
> > > > > on
> > > > > > Mediatrix. Is there a way to set up accounts on mediatrix? I'm
> > > testing
> > > > it
> > > > > > with one SIP phone.
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Director General: NEFACOMP [mailto:dg at nefacomp.net]
> > > > > > Sent: Wednesday, October 22, 2003 4:55 AM
> > > > > > To: sesha at iic.com; serusers at lists.iptel.org
> > > > > > Subject: Re: [Serusers]SIP Gateway
> > > > > >
> > > > > >
> > > > > > I used Mediatrix 1204.
> > > > > > Have set up all the accounts that Mediatrix should use in
> > registering
> > > to
> > > > > > SER?
> > > > > > What software version are your Mediatrix using? You sometimes
need
> > to
> > > > > > upgrade your firmaware.
> > > > > > Also, the same Mediatrix can be H.323 or SIP. Are you sure that
> > yours
> > > is
> > > > > > using SIP?
> > > > > >
> > > > > >
> > > > > > Thanks
> > > > > > Emery
> > > > > > ----- Original Message -----
> > > > > > From: "Sesha B" <sesha at iic.com>
> > > > > > To: <serusers at lists.iptel.org>
> > > > > > Sent: Monday, October 20, 2003 23:02
> > > > > > Subject: RE: [Serusers]SIP Gateway
> > > > > >
> > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > I'm using a SIP gateway (Mediatrix 1204) on 4 ports on PBX. I
am
> > not
> > > > > able
> > > > > > to
> > > > > > > register the gateway on the SIP server. Is there a way I check
> the
> > > > logs
> > > > > on
> > > > > > > the SER to see if it is really registering or not? And can
> someone
> > > > > please
> > > > > > > suggest why is the SIP Gateway not registering with the SER?
> Thank
> > > you
> > > > > > very
> > > > > > > much.
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Serusers mailing list
> > > > > > > serusers at lists.iptel.org
> > > > > > > http://lists.iptel.org/mailman/listinfo/serusers
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Serusers mailing list
> > > > > serusers at lists.iptel.org
> > > > > http://lists.iptel.org/mailman/listinfo/serusers
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
>

More information about the sr-users mailing list