[Serusers]SIP Gateway

[Sesha B]

I have these parameters already set. I also restarted mediatrix after
setting these MIB variables but I can see only the SIP phone registering
with the SER in the ser diagnostics but I dont see the SIP gateway's address
at all !!!

-----Original Message-----
From: Director General: NEFACOMP [mailto:dg at nefacomp.net]
Sent: Wednesday, October 22, 2003 10:47 AM
To: sesha at iic.com; serusers at lists.iptel.org
Subject: Re: [Serusers]SIP Gateway


I will send instructions for the first port and you will be able to do the
same for the other ports.

In the provisioning MIB, find the key:
    sipMib -> sipUAGroup
Start by configuring the SER address:
    sipMib -> sipUAGroup -> sipUAServerGroup -> sipUAServerStaticGroup
    and configure the parameters therein. Such as Registrar Host, Port ...

Second, configure the port 1 as follows:
    sipMib -> sipUAGroup -> sipUA1Group
    configure the main alias entry which should be the account created on
the SER server for that port
    you may even configure other things if needed such as other aliases,
....
For other ports, just replace # in sipUA#Group by the correct port number
(2, 3 or 4)

Also, you may need to enable some options in the provisioningMib key.


Thanks
Emery
----- Original Message -----
From: "Director General: NEFACOMP" <dg at nefacomp.net>
To: <sesha at iic.com>; <serusers at lists.iptel.org>
Sent: Wednesday, October 22, 2003 15:53
Subject: Re: [Serusers]SIP Gateway


> I was asking the firmware version (the software installed on the 1204).
Not
> the Unit Manager.
>
> I am going to send you instructions on how to set up accounts in the unit.
> These are accounts the unit uses in registering with the SER server.
> Note that you will need to configure the same accounts within SER.
>
>
> Thanks
> Emery
> ----- Original Message -----
> From: "Sesha B" <sesha at iic.com>
> To: "Director General: NEFACOMP" <dg at nefacomp.net>; <serusers at lists.iptel.org>
> Sent: Wednesday, October 22, 2003 14:55
> Subject: RE: [Serusers]SIP Gateway
>
>
> > Hi,
> > I'm using Unit Manager Express version 1.1.1.5 to configure Mediatrix
> 1204.
> > I have configured it to use SIP. I am confused about setting up accounts
> on
> > Mediatrix. Is there a way to set up accounts on mediatrix? I'm  testing
it
> > with one SIP phone.
> >
> > -----Original Message-----
> > From: Director General: NEFACOMP [mailto:dg at nefacomp.net]
> > Sent: Wednesday, October 22, 2003 4:55 AM
> > To: sesha at iic.com; serusers at lists.iptel.org
> > Subject: Re: [Serusers]SIP Gateway
> >
> >
> > I used Mediatrix 1204.
> > Have set up all the accounts that Mediatrix should use in registering to
> > SER?
> > What software version are your Mediatrix using? You sometimes need to
> > upgrade your firmaware.
> > Also, the same Mediatrix can be H.323 or SIP. Are you sure that yours is
> > using SIP?
> >
> >
> > Thanks
> > Emery
> > ----- Original Message -----
> > From: "Sesha B" <sesha at iic.com>
> > To: <serusers at lists.iptel.org>
> > Sent: Monday, October 20, 2003 23:02
> > Subject: RE: [Serusers]SIP Gateway
> >
> >
> > > Hi,
> > >
> > > I'm using a SIP gateway (Mediatrix 1204) on 4 ports on PBX. I am not
> able
> > to
> > > register the gateway on the SIP server. Is there a way I check the
logs
> on
> > > the SER to see if it is really registering or not? And can someone
> please
> > > suggest why is the SIP Gateway not registering with the SER? Thank you
> > very
> > > much.
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers at lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> > >
> >
> >
> >
> >
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>