[Serusers] The cfgs for ser/vm

[Pablo Murillo]

Hi

My config:

Binarys:  /usr/local/sbin/

cp /usr/local/sbin/ser /usr/local/sbin/ser-vm
This is only to STOP one or the other ser

Place the "*.init" on /etc/rc.d/init.d
Place the "sems" on /etc/rc.d/init.d

chkconfig ser.init --add
chkconfig ser-vm.init --add
chkconfig sems --add

Ser CFGs:  /usr/local/etc/ser/
Sems CFG :  /etc/sems/

Must replace [DOMAIN] with your full domain.
Must replace [DOMAIN\.EXT] with your domain\.ext
Check the IPs and ports too

We are using:
192.168.0.209 for internal test
Port 5060 for SER Proxy
Port 5061 for SER-VM

There are some things to change yet
I began this week with SER, and I didn't read all the documentation yet
I used an OLD script from IPTEL and some things that I found on old and new
mails

Pablo Murillo
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cfgs.zip
Type: application/x-zip-compressed
Size: 8407 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20031017/f69ff680/attachment.bin>