[Serusers] Multiple contacts

[Jan Janak]

Hello,

to resolve the problem you describe the script would have to be executed
for every branch, i.e. the last condition in your example should be
executed for sip:10.20.0.100:5060 and also for sip:192.44.30.122:16621.

That's currently not possible, because the script will be executed for
one branch only.

We have it on our todo list, contributions are welcome.

  Jan.

On 08-10 15:06, Yang Xiang wrote:
> Hi,
> 
> a user, we say yang, is registered from different locations, therefor there
> are multiple contacts in the location table like this:
> ---------------------------------
> aor    : 'yang at domain'
> Contact: 'sip:10.20.0.100:5060'
> q:        1.00
> 
> aor    :'yang at domain'
> Contact: 'sip:192.44.30.122:16621'
> q:        0.00
> -----------------------------------
> 
> I have configured SER as following:
> ---------------------------
>         if (!lookup("location")) {
>                 sl_send_reply("404", "Not Found");
>                 break;
>         };
> 
>         if (!uri=~"^sip:(.+@)?(10\.20\.).*") {
>                 forward("192.168.252.2");
>                 break;
>         };
> 
>         t_relay();
> ------------------------------
> 
> That says the INVITE should  be forwarded to an outbound proxy 192.168.252.2
> if the user is not located in our internal network, e.g. 10.20.0.0/24.
> However, the Request-URI will be overwritten with the highest-q rated
> contact, in this case with the contact 'sip:10.20.0.100:5060' and the
> if-block will be skiped. This induces the INVITE to
> 'sip:192.44.30.122:16621' will be also directly sent but not via our
> outbound proxy 192.168.252.2, what means the messages will be discarded by
> the firewall.
> 
> Is there any chance to resolve this problem?
> 
> Thanks
> 
> Yang
> 
> 
> 
> 
> 
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers