[Serusers]serctl

[Sesha Bhatlapenumarthy]

Can someone please help me with this? I'm not able to serctl ping
sip:466 at iic.com while I am successfully able to do serctl ping sip:x.x.x.x
where x.x.x.x is the IP of the SIP phone with extension 466. Can someone
tell me what must be the reason? Thank you very much.





-----Original Message-----
From: Jiri Kuthan [mailto:jiri at iptel.org]
Sent: Tuesday, October 07, 2003 5:17 AM
To: Sesha Bhatlapenumarthy; Daniel-Constantin.Mierla at fokus.fraunhofer.de
Cc: serusers at lists.iptel.org
Subject: RE: [Serusers]serctl


At 11:13 AM 10/7/2003, Jiri Kuthan wrote:
>At 10:04 PM 10/6/2003, Sesha Bhatlapenumarthy wrote:
>>Hi,
>>
>>I've tried to do a "serctl ping sip:466 at iic.com" [466 is a extension to
the
>>SIP phone]. I get the following error. Can someone please tell me what it
>>is? I'm not able to forward the call to the SIP phone through PBX.
>>
>> serctl ping sip:466 at iic.com
>[...]
>
>> 2(24590) ERROR: udp_send: sendto(sock,0x402f2fc8,359,0,0x402f245c,16):
>>Invalid
>>argument(22)
>> 2(24590) CRITICAL: invalid sendtoparameters
>>one possible reason is the server is bound to localhost and
>>attempts to send to the net
>
>This might be the reason -- you are running ser in debugging mode, which
>possibly binds only to loopback interface and you can't send out. Try
>turning debugging mode off.

Sorry -- better advice. Check first at which IP addresses listens with
"serctl ps". If there is none which can route to iic.com (like loopback),
set listen=IP in your config to a routable address.


-jiri