[Serusers] caller-id with raius using sip-rpid
Steve Dolloff
sdolloff at noc.dls.net
Mon Oct 6 19:40:34 CEST 2003
OK, I understand now. The caller-id works correctly when I call out to
the PSTN through a Cisco AS5350 gateway. The caller-id does not work
when I call another ATA. I have to assume that the ATA does not support
the remote-party-id field. Anyone else have experience with this, since
I don't see any documentation related to remote-party-id on an ATA?
I'll also post this to the cisco message boards and re-post any response
that I get.
Stephen
Subject: RE: [Serusers] caller-id with raius using sip-rpid
Well, as you see, rpid is attached to a non-numeric subscriber's
request, so that it can be processed by devices capable of doing
so. What is the problem then?
-jiri
At 11:21 PM 10/3/2003, Steve Dolloff wrote:
>I want caller-id to work for a subscriber who has a non-numeric
>username.
>
>Subject: Re: [Serusers] caller-id with raius using sip-rpid
>
>There is a Remote-Party-ID header in your message. What else do you
>want ? Please be more specific and provide some examples, your
>terminology is
>hard to follow for me, sorry.
>
> Jan.
>
>On 03-10 16:05, Steve Dolloff wrote:
>> Calling from one ata to another, proxied and registered through ser,
>> here is my ngrep port 5060 output. Remote-party-id is being set but
>not
>> the call-id.
>>
>> U 219.242.10.153:5060 -> 226.145.234.80:5060
>> INVITE sip:256 at 226.145.234.80:5060;user=phone;transport=udp
>> SIP/2.0..Max-Fo
>> rwards: 10..Record-Route:
>> <sip:256 at 219.242.10.153;ftag=2441840520;lr=on>..V
>> ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via:
>> SIP/2.0/
>> UDP 226.145.234.113:5060;rport=5060..From:
>> sip:test at voip2.test.net;tag=24418
>> 40520..To: <sip:256 at voip2.test.net;user=phone>..Call-ID:
>> 2303820380 at 226.145.
>> 234.113..CSeq: 2 INVITE..Contact:
>> <sip:test at 226.145.234.113:5060;transport=
>> udp>..User-Agent: Cisco ATA 186 v2.16.2 ata18x
>> (030909a)..Authorization: D
>> igest
>>
username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b
>>
>>
>812a73562d346e6f",uri="sip:256 at voip2.test.net",response="1a4552ce6c6533
3
>> 439b
>> 6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type:
>> applicatio
>> n/sdp..Remote-Party-ID:
>> 222;party=calling;id-type=subscriber;screen=no....v
>> =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN
IP4
>> 226.14
>> 5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0
>> PCMU/8000/1..
>> a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101
>> telephone-even
>> t/8000..a=fmtp:101 0-15..a=direction:active..
>> #
>> U 226.145.234.80:5060 -> 219.242.10.153:5060
>> SIP/2.0 100 Trying..Via: SIP/2.0/UDP
>> 219.242.10.153;branch=z9hG4bK41f3.9e2c
>> 3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From:
>> sip:test at vo
>> ip2.test.net;tag=2441840520..To:
>> <sip:256 at voip2.test.net;user=phone>;tag=2077
>> 559661..Call-ID: 2303820380 at 226.145.234.113..CSeq: 2
INVITE..Server:
>> Cisco
>> ATA 186 v2.16.2 ata18x (030909a)..Content-Length: 0....
>>
>>
>> Subject: Re: [Serusers] caller-id with raius using sip-rpid
>>
>> Is there any Remote-Party-ID header field in outgoing INVITE ? If so
>> then your gateway/whatever ignores it.
>>
>> Jan.
>>
>> On 02-10 15:18, Steve Dolloff wrote:
>> > Any phone that supports caller-id. But I haven't gotten to work.
>I'm
>> > seeing the username instead.
>> >
>> >
>> > Subject: RE: [Serusers] caller-id with raius using sip-rpid
>> >
>> > Which phone device should I use to see caller ID
>> > information when using the ATA186?
>> >
>> > Alejandro
>> >
>> > --- Steve Dolloff <sdolloff at noc.test.net> escreveu: >
>> > At the top of the config I have the following
>> > > statement....
>> > >
>> > > if (method=="INVITE") {
>> > > record_route();
>> > > if (!radius_www_authorize("")) {
>> > > log(1,"radius auth
>> > > failure");
>> > >
>> > > www_challenge("voip2.test.net","0");
>> > > break;
>> > > };
>> > > append_rpid_hf();
>> > > };
>> > >
>> > > If I call a phone with caller-id and my username is
>> > > 256, it shows 256 on
>> > > the phone, if I call with a username of test, it
>> > > shows 4534 on the
>> > > handset even though I have the sip-rpid set to 222.
>> > >
>> > > Stephen
>> > >
>> > >
>> > > Subject: Re: [Serusers] caller-id with raius using
>> > > sip-rpid
>> > >
>> > > Retrieving caller-id when users register doesn't
>> > > work because REGISTER
>> > > messages are processed by the server and the server
>> > > generates a reply
>> > > only.
>> > >
>> > > What you need is to insert Remote-Party-ID header
>> > > field into INVITE
>> > > message, to make it work you must authenticate also
>> > > INVITE messages.
>> > > My guess is that you do not authenticate INVITE
>> > > messages and therefore
>> > > there is nothing append_rpid_hf can add.
>> > >
>> > > Jan.
>> > >
>> > > On 02-10 11:35, Steve Dolloff wrote:
>> > > > I want to retrieve the caller-id of a user from
>> > > radius when they
>> > > > register and use it when I redirect an invite
>> > > request to the voicemail
>> > > > system so that the voicemail system can route the
>> > > call based on
>> > > > caller-id. I also want to be able to send it to
>> > > the sip gateway when
>> > > I
>> > > > am routing calls to the pstn.
>> > > >
>> > > > I have this in my config currently and it doesn't
>> > > appear to set the
>> > > > caller-id in the invite message.
>> > > >
>> > > >
>> > > rewritehostport("219.242.10.153:5061");
>> > > > append_rpid_hf();
>> > > > t_relay();
>> > > >
>> > > >
>> > > > Subject: Re: [Serusers] caller-id with raius using
>> > > sip-rpid
>> > > >
>> > > > append_rpid_hf has no parameters. Version with 2
>> > > parameters is in
>> > > > unstable branch in the CVS only. What exactly do
>> > > you want to do ?
>> > > >
>> > > > Jan.
>> > > >
>> > > > On 02-10 11:26, Steve Dolloff wrote:
>> > > > > I found this example in a previous Serusers
>> > > message.
>> > > > >
>> > > > > append_rpid_hf("<sip:+",
>> > > > >
>> > > > >
>> > > >
>> > >
>> >
>>
>"@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes")
;
>> > > > >
>> > > > > I tried calling append_rpid_hf();, but it does
>> > > nothing.
>> > > > >
>> > > > > I also tried
>> > > > >
>> > > >
>> > >
>> >
>>
>append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes
"
>> > > > > ); but I get an unknown command presumably
>> > > because I am not using
>> > > the
>> > > > > right number of parameters.
>> > > > >
>> > > > > I only want to modify the calling-id info.
>> > > > >
>> > > > > Can anyone provide an example?
>> > > > >
>> > > > > -----Original Message-----
>> > > > > From: Jan Janak [mailto:jan at iptel.org]
>> > > > > Sent: Thursday, October 02, 2003 11:09 AM
>> > > > > To: Steve Dolloff
>> > > > > Cc: serusers at lists.iptel.org
>> > > > > Subject: Re: [Serusers] caller-id with raius
>> > > using sip-rpid
>> > > > >
>> > > > > If you want to add Remote-Party-ID header field
>> > > then you have to
>> > > call
>> > > > > append_rpid_hf function in your script.
>> > > > >
>> > > > > Jan.
>> > > > >
>> > > > > On 02-10 11:07, Steve Dolloff wrote:
>> > > > > > OK, I am setting up a Voicemail system (using
>> > > asterisk) and I am
>> > > > > > currently doing a rewritehostport(ip:port) and
>> > > then trelay() to
>> > > send
>> > > > > it
>> > > > > > to the voicemail system if an invite fails.
>> > > > > >
>> > > > > > Should I change something? See my ser.cfg and
>> > > output from the call
>> > > > to
>> > > > > > the vm.
>> > > > > >
>> > > > > > Here is the code from ser.cfg
>> > > > > >
>> > > > > >
>> > > > > rewritehostport("219.242.10.153:5061");
>> > > > > > t_relay();
>> > > > > >
>> > > > > > Here is the sip info from asterisk.
>> > > > > >
>> > > > > > INVITE sip:200 at 219.242.10.153:5061;user=phone
>> > > SIP/2.0
>> > > > > > Max-Forwards: 10
>> > > > > > Record-Route:
>> > > <sip:200 at 219.242.10.153;ftag=2236658534;lr=on>
>> > > > > > Via: SIP/2.0/UDP
>> > > 219.242.10.153;branch=z9hG4bK13de.31901234.0
>> > > > > > Via: SIP/2.0/UDP
>> > > 226.145.234.113:5060;rport=5060
>> > > > > > From: sip:test at voip2.test.net;tag=2236658534
>> > > > > > To: <sip:200 at voip2.test.net;user=phone>
>> > > > > > Call-ID: 2218108971 at 226.145.234.113
>> > > > > > CSeq: 1 INVITE
>> > > > > > Contact:
>> > > <sip:test at 226.145.234.113:5060;transport=udp>
>> > > > > > User-Agent: Cisco ATA 186 v2.16.2 ata18x
>> > > (030909a)
>> > > > > > Expires: 300
>> > > > > > Content-Length: 271
>> > > > > > Content-Type: application/sdp
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > Subject: Re: [Serusers] caller-id with raius
>> > > using sip-rpid
>> > > > > >
>> > > > > > Remote-Party-ID header field is inserted into
>> > > forwarded requests,
>> > > > not
>> > > > > > responses.
>> > > > > >
>> > > > > > Jan.
>> > > > > >
>> > > > > > On 02-10 10:53, Steve Dolloff wrote:
>> > > > > > > Ser doesn't appear to be passing the
>> > > Caller-id to the ata at
>> > > auth
>> > > > or
>> > > > > I
>> > > > > > > am doing something wrong. Can anyone point
>> > > me in the right
>> > > > > direction?
>> > > > > > >
>> > > > > > > Thanks,
>> > > > > > >
>> > > > > > > Stephen
>> > > > > > >
>> > > > > > > I have the following entry in my freeradius
>> > > users file.
>> > > > > > >
>> > > > > > > test at voip2.test.net Auth-Type := Digest,
>> > > User-Password == "test"
>> > > > > > > Reply-Message = "Hello, test with
>> > > digest", Sip-Rpid =
>> > > > > > > "8472222222"
>> > > > > > >
>> > > > > > > When I run a radclient test I get the
>> > > correct info..
>> > > > > > >
>> > > > > > > radclient -f digest.test 219.242.10.153:1812
>> > > auth testing
>> > > > > > > Received response ID 134, code 2, length =
>> > > 57
>> > >
>> > === message truncated ===
>> >
>> > Yahoo! Mail - o melhor webmail do Brasil
>> > http://mail.yahoo.com.br
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/
More information about the sr-users
mailing list