[Serusers] Multiple SIP - PSTN Gateways

[Steve Dolloff]

Is there any way to deal with a busy or out of service gateway?  Would
either of these situations activate a failure that we could use to
change the route to a new gateway?  If we set up the gateways in a
huntgroup scenaro, and 2 or 3 failovers had to take place, what sort of
delay could one expect?

Thanks,

Stephen

Subject: Re: [Serusers] Multiple SIP - PSTN Gateways

roughly like this:

if (uri=~"sip:972") {
  sethostport("dfw.nationalgateways.com");
} else if (uri=~"sip:911") {
  sethostport("emrgency.ngw.com");
} else {
  sethostport("defaultgw.com");
};
t_relay();

That's it. No guarantee for positioning of semicolons and other
:$)"./... symbols.

-jiri

At 02:43 PM 9/25/2003, Wasik, Paul wrote:
>Hi all,
>
>Has anyone built a ser.cfg that can conditionally forward SIP calls to
>different SIP - PSTN gateways based on the outgoing calls area or
exchange
>code. I'm sure it can be done but I'm not that good with syntax of the
>ser.cfg file. I know how to route to single SIP GW based on the dialed
>string but how do I make SER use multiple SIP gateways? Can anyone
provide
>an example of this? 
>
>Thanks,
>
>Paul
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers

--
Jiri Kuthan            http://iptel.org/~jiri/ 

_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers