[Serusers] accounting problems: no stop record
Jan Janak
jan at iptel.org
Fri Nov 21 19:50:39 CET 2003
Hello,
you don't seem to call record_route() in your config file so BYE
requests will be sent directly (bypassing the server).
BTW, lookup("aliases") and such should be probably called within if(uri
== myself) condition, see the default configuration file.
Jan.
On 21-11 13:34, Geert Nijpels wrote:
> Hello all,
>
> I'm trying to get accounting working, but I don't seem to get any stop
> records in the database. However, when I tell ser to log to syslog, I do
> get the STOP records. The only thing I come by when searching the
> archives is to be sure that the loose_route() is after the setflag.
>
> I log incoming invite's and bye's to stderror, and I see them coming by:
>
> ****
> 0(14598) looking up aliases
> 0(14598)
> ****
> time [Fri Nov 21 13:22:50 2003] method <INVITE> Setting acc flags ****
> 0(14598) Setting accounting flag
> 0(14598) Setting missed calls flag 0(14598)
> ****
> time [Fri Nov 21 13:22:50 2003] method <INVITE> r-uri
> <8910 at ams-ix.net;user=phone>
> IP: <193.194.136.248> - t-uri <sip:8910 at ams-ix.net;user=phone>
> ****
> 0(14598) looking up aliases
> 0(14598)
> ****
> time [Fri Nov 21 13:22:55 2003] method <ACK> r-uri
> <8910 at 193.194.136.225:5060>
> IP: <193.194.136.248> - t-uri <sip:8910 at ams-ix.net;user=phone>
> ****
> 0(14598) looking up aliases
> 0(14598)
> ****
> time [Fri Nov 21 13:23:02 2003] method <BYE> Setting acc flags ****
> 0(14598) Setting accounting flag
> 0(14598) Setting missed calls flag 0(14598)
> ****
> time [Fri Nov 21 13:23:02 2003] method <BYE> r-uri
> <8910 at 193.194.136.225:5060>
> IP: <193.194.136.248> - t-uri <sip:8910 at ams-ix.net;user=phone>
> ****
>
> Also, the INVITE is inserted into the database, but the BYE not. When I
> change "db_flag" to "log_flag" and change log_stderror=yes to
> log_stderror=no, I do see the BYE ACC antries in the syslog. I do not
> see errors int he mysql log file. No obvious errors when viewing debug=7.
>
> Running:
> ser 0.8.11
> Mysql 4.x
>
> I hope for a few suggestions:-) My config is pasted in below.
>
> Kind regards,
>
> Geert
>
> ----------
> Config:
>
> # ----------- global configuration parameters ------------------------
>
> #debug=3 # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no # (cmd line: -E)
>
> debug=3
> fork=no
> log_stderror=yes
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> #children=4
> fifo="/tmp/ser_fifo"
> listen="colo.jink.net"
> alias="ams-ix.net"
>
> # ------------------ module loading ----------------------------------
>
> loadmodule "/usr/lib/ser/modules/mysql.so"
> loadmodule "/usr/lib/ser/modules/sl.so"
> loadmodule "/usr/lib/ser/modules/tm.so"
> loadmodule "/usr/lib/ser/modules/rr.so"
> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/lib/ser/modules/usrloc.so"
> loadmodule "/usr/lib/ser/modules/registrar.so"
> loadmodule "/usr/lib/ser/modules/xlog.so"
> loadmodule "/usr/local/lib/ser/modules/textops.so"
> loadmodule "/usr/lib/ser/modules/acc.so"
> loadmodule "/usr/lib/ser/modules/auth.so"
> loadmodule "/usr/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
> ### Set up parameters for database lookups
> modparam("usrloc|auth_db|group|acc", "db_url",
> "sql://xxxx:xxxx@localhost/ser")
>
> ### mode 1: direct writing to database
> ### mode 2: buffered writing to database
> modparam("usrloc", "db_mode", 1)
>
> # -- auth_db params --
> ### Enable encrypted database authentication
> modparam("auth_db", "calculate_ha1", yes)
> modparam("auth_db", "password_column", "password")
>
> # -- acc params --
> ### For acc Database support, uncomment: DEFS+=-DSQL_ACC in
> ### sip_router/modules/acc/Makefile and recompile
>
> ### Set up missed call logging
> modparam("acc", "db_missed_flag", 3)
> modparam("acc", "db_flag", 1 )
> modparam("acc", "log_level", 1)
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
>
> # ------------------------- request routing logic -------------------
>
> route{
>
> if (method=="INVITE" || method=="BYE"){
> ## Accounting for all calls
> xlog("L_INFO", "\n****\n time [%Tf] method <%rm> Setting acc flags
> ****\n");
> log(1, "Setting accounting flag\n");
> setflag(1);
>
> ## Accounting for "missed calls"
> log(1, "Setting missed calls flag");
> setflag(3);
> };
>
> ## Log the request:
> xlog("L_INFO", "\n****\n time [%Tf] method <%rm> r-uri <%ru>\n IP:
> <%is> - t-uri <%tu>\n\n****\n");
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if (len_gt( max_len )) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # Load aliases in memory
> log(1, "looking up aliases\n");
> lookup("aliases");
>
>
> # loose-route processing
> #if (loose_route()) {
> # t_relay();
> # break;
> #};
>
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
> if (!www_authorize("ams-ix.net", "subscriber")) {
> www_challenge("ams-ix.net", "0");
> break;
> };
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> if ((method=="INVITE" || method=="ACK") && t_newtran()) {
> t_reply("404", "Not Found");
> #log(1, "Log missed call");
> break;
> };
> sl_send_reply("404", "Not Found");
> break;
> }else{
> if (!t_relay()) {
> sl_reply_error();
> };
> };
> };
> }
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list