[Serusers] ser/radius
Madan
madan.r at net4india.net
Sat Nov 15 10:03:04 CET 2003
thx everybody, i got it working
----- Original Message -----
From: "Jan Janak" <jan at iptel.org>
To: "Madan" <madan.r at net4india.net>
Cc: <Daniel-Constantin.Mierla at fokus.fraunhofer.de>; "serusers"
<serusers at lists.iptel.org>
Sent: Saturday, November 15, 2003 2:29 PM
Subject: Re: [Serusers] ser/radius
> Hello,
>
> please read the ser-radius howto, it describes accounting as well.
>
> Jan.
>
> On 14-11 10:11, Madan wrote:
> > Hi Jan,
> > thx for the input, now after few attempts i have got ser working with
radius
> > but only the auth part, i can nt see any accounting details being logged
in
> > can somebody please tell me as to how would i get the accounting details
> >
> > TIA
> > Madan
> > ----- Original Message -----
> > From: "Jan Janak" <jan at iptel.org>
> > To: "Madan" <madan.r at net4india.net>
> > Cc: <Daniel-Constantin.Mierla at fokus.fraunhofer.de>; "serusers"
> > <serusers at lists.iptel.org>
> > Sent: Friday, November 14, 2003 4:03 AM
> > Subject: Re: [Serusers] ser/radius
> >
> >
> > > Hello,
> > >
> > > >From the attached logs I would say that the authentication in radius
> > > server succeeded, because it returns "Authenticated".
> > >
> > > If ser doesn't authenticate in this case then you proabably:
> > >
> > > - didn't updated dictionaries properly
> > > - configured wrong secret
> > >
> > > Read the ser-radius howto again and make sure that you have configured
> > > everything properly.
> > >
> > > Jan.
> > >
> > > On 13-11 18:10, Madan wrote:
> > > > here is the log file of radius
> > > >
> > > > -=-------radiuslogs---------------------
> > > >
> > > >
> > > > rad_recv: Access-Request packet from host 202.71.135.219:32770,
id=205,
> > length=286
> > > > User-Name = "2222 at sip.net4india.com"
> > > > Digest-Attributes = "\n\0062222"
> > > > Digest-Attributes = "\001\023sip.net4india.com"
> > > > Digest-Attributes =
> > "\002*3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4"
> > > > Digest-Attributes = "\004\027sip:sip.net4india.com"
> > > > Digest-Attributes = "\003\nREGISTER"
> > > > Digest-Attributes = "\005\006auth"
> > > > Digest-Attributes = "\t\n00000003"
> > > > Digest-Attributes = "\010"EDB2B98710FD4AC6B4022AD2E3A83BFF"
> > > > Digest-Response = "3c3d66cbf7c39f286d2cb37e3c8caa37"
> > > > Service-Type = Sip-Session
> > > > Sip-Uri-User = "2222 at sip.net4india.com"
> > > > NAS-IP-Address = 202.71.135.219
> > > > NAS-Port = 5060
> > > > modcall: entering group authorize for request 0
> > > > modcall[authorize]: module "preprocess" returns ok for request 0
> > > > rlm_digest: Converting Digest-Attributes to something sane...
> > > > Digest-User-Name = "2222"
> > > > Digest-Realm = "sip.net4india.com"
> > > > Digest-Nonce = "3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4"
> > > > Digest-Uri = "sip:sip.net4india.com"
> > > > Digest-Method = "REGISTER"
> > > > Digest-Qop = "auth"
> > > > Digest-Nonce-Count = "00000003"
> > > > Digest-Cnonce = "EDB2B98710FD4AC6B4022AD2E3A83BFF"
> > > > rlm_digest: Adding Auth-Type = DIGEST
> > > > modcall[authorize]: module "digest" returns ok for request 0
> > > > modcall[authorize]: module "chap" returns noop for request 0
> > > > rlm_eap: EAP-Message not found
> > > > modcall[authorize]: module "eap" returns noop for request 0
> > > > rlm_digest: Converting Digest-Attributes to something sane...
> > > > Digest-User-Name = "2222"
> > > > Digest-Realm = "sip.net4india.com"
> > > > Digest-Nonce = "3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4"
> > > > Digest-Uri = "sip:sip.net4india.com"
> > > > Digest-Method = "REGISTER"
> > > > Digest-Qop = "auth"
> > > > Digest-Nonce-Count = "00000003"
> > > > Digest-Cnonce = "EDB2B98710FD4AC6B4022AD2E3A83BFF"
> > > > modcall[authorize]: module "digest" returns ok for request 0
> > > > rlm_realm: Looking up realm "sip.net4india.com" for User-Name =
> > "2222 at sip.net4india.com"
> > > > rlm_realm: No such realm "sip.net4india.com"
> > > > modcall[authorize]: module "suffix" returns noop for request 0
> > > > users: Matched DEFAULT at 152
> > > > users: Matched 2222 at sip.net4india.com at 224
> > > > modcall[authorize]: module "files" returns ok for request 0
> > > > modcall[authorize]: module "mschap" returns noop for request 0
> > > > modcall: group authorize returns ok for request 0
> > > > rad_check_password: Found Auth-Type Digest
> > > > auth: type "DIGEST"
> > > > modcall: entering group Auth-Type for request 0
> > > > A1 = 2222:sip.net4india.com:test
> > > > A2 = REGISTER:sip:sip.net4india.com
> > > > KD =
> >
f386a675cf9d0e8941be95dac13b40d1:3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4:00
> > 000003:EDB2B98710FD4AC6B4022AD2E3A83BFF:auth
> > > > :4f5b38da39851b9b27477c4ea50c375b
> > > > modcall[authenticate]: module "digest" returns ok for request 0
> > > > modcall: group Auth-Type returns ok for request 0
> > > > radius_xlat: 'Authenticated'
> > > > Sending Access-Accept of id 205 to 202.71.135.219:32770
> > > > Reply-Message = "Authenticated"
> > > > Sip-Rpid = "1234"
> > > > Finished request 0
> > > > Going to the next request
> > > > --- Walking the entire request list ---
> > > > Waking up in 6 seconds...
> > > > --- Walking the entire request list ---
> > > > Cleaning up request 0 ID 205 with timestamp 3fb37f3e
> > > >
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: Daniel-Constantin Mierla
> > > > To: Madan
> > > > Cc: serusers
> > > > Sent: Thursday, November 13, 2003 5:58 PM
> > > > Subject: Re: [Serusers] ser/radius
> > > >
> > > >
> > > > Hello,
> > > > now it seems that the authentication in Radius side failed :) :
> > > >
> > > > 0(13462) radius_authorize_sterman(): FailureSo I need the logs from
> > Radius server, too. Better reproduce again the case and send both ser
and
> > radius logs in a mail.
> > > >
> > > > }Daniel
> > > >
> > > > On 11/13/2003 1:12 PM, Madan wrote:
> > > >
> > > > Hi Daniel,
> > > > here is the debug-9 level logs
> > > >
> > > > 0(13462) SIP Request:
> > > > 0(13462) method: <REGISTER>
> > > > 0(13462) uri: <sip:sip.net4india.com>
> > > > 0(13462) version: <SIP/2.0>
> > > > 0(13462) parse_headers: flags=1
> > > > 0(13462) end of header reached, state=5
> > > > 0(13462) parse_headers: Via found, flags=1
> > > > 0(13462) parse_headers: this is the first via
> > > > 0(13462) After parse_msg...
> > > > 0(13462) preparing to run routing scripts...
> > > > 0(13462) DEBUG : is_maxfwd_present: searching for max_forwards
header
> > > > 0(13462) parse_headers: flags=128
> > > > 0(13462) DEBUG: is_maxfwd_present: value = 70
> > > > 0(13462) parse_headers: flags=8
> > > > 0(13462) DEBUG: add_param: tag=b012f0317df24bc28c22c024cfa027f3
> > > > 0(13462) DEBUG: add_param: epid=4afef3ee8a
> > > > 0(13462) end of header reached, state=29
> > > > 0(13462) parse_headers: flags=256
> > > > 0(13462) end of header reached, state=9
> > > > 0(13462) DEBUG: get_hdr_field: <To> [30];
> > uri=[sip:1111 at sip.net4india.com]
> > > > 0(13462) DEBUG: to body [<sip:1111 at sip.net4india.com>
> > > > ]
> > > > 0(13462) get_hdr_field: cseq <CSeq>: <1> <REGISTER>
> > > > 0(13462) DEBUG: get_hdr_body : content_length=0
> > > > 0(13462) found end of header
> > > > 0(13462) find_first_route(): No Route headers found
> > > > 0(13462) loose_route(): There is no Route HF
> > > > 0(13462) REGISTER: Authenticating user
> > > > 0(13462) parse_headers: flags=4096
> > > > 0(13462) pre_auth(): Credentials with given realm not found
> > > > 0(13462) REGISTER: challenging user
> > > > 0(13462) build_auth_hf(): 'WWW-Authenticate: Digest
> > > > realm="sip.net4india.com",
nonce="3fb37a01834a42156a764ee9df05ad19d7687a
> > > > 23", qop="auth"
> > > > '
> > > > 0(13462) parse_headers: flags=-1
> > > > 0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0)
> > > > 0(13462) receive_msg: cleaning up
> > > > 0(13462) SIP Request:
> > > > 0(13462) method: <REGISTER>
> > > > 0(13462) uri: <sip:sip.net4india.com>
> > > > 0(13462) version: <SIP/2.0>
> > > > 0(13462) parse_headers: flags=1
> > > > 0(13462) end of header reached, state=5
> > > > 0(13462) parse_headers: Via found, flags=1
> > > > 0(13462) parse_headers: this is the first via
> > > > 0(13462) After parse_msg...
> > > > 0(13462) preparing to run routing scripts...
> > > > 0(13462) DEBUG : is_maxfwd_present: searching for max_forwards
header
> > > > 0(13462) parse_headers: flags=128
> > > > 0(13462) DEBUG: is_maxfwd_present: value = 70
> > > > 0(13462) parse_headers: flags=8
> > > > (13462) DEBUG: add_param: tag=0809578b00894f62bdb457bee0c4234b
> > > > 0(13462) DEBUG: add_param: epid=85dccaccd6
> > > > 0(13462) end of header reached, state=29
> > > > 0(13462) parse_headers: flags=256
> > > > 0(13462) end of header reached, state=9
> > > > 0(13462) DEBUG: get_hdr_field: <To> [30];
> > uri=[sip:1111 at sip.net4india.com]
> > > > 0(13462) DEBUG: to body [<sip:1111 at sip.net4india.com>
> > > > ]
> > > > 0(13462) get_hdr_field: cseq <CSeq>: <1> <REGISTER>
> > > > 0(13462) DEBUG: get_hdr_body : content_length=0
> > > > 0(13462) found end of header
> > > > 0(13462) find_first_route(): No Route headers found
> > > > 0(13462) loose_route(): There is no Route HF
> > > > 0(13462) REGISTER: Authenticating user
> > > > 0(13462) parse_headers: flags=4096
> > > > 0(13462) pre_auth(): Credentials with given realm not found
> > > > 0(13462) REGISTER: challenging user
> > > > 0(13462) build_auth_hf(): 'WWW-Authenticate: Digest
> > > > realm="sip.net4india.com",
nonce="3fb37a088e0d83f2084b0221f11e7ac8d6709b
> > > > e0", qop="auth"
> > > > '
> > > > 0(13462) parse_headers: flags=-1
> > > > 0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0)
> > > > 0(13462) receive_msg: cleaning up
> > > > 0(13462) SIP Request:
> > > > 0(13462) method: <REGISTER>
> > > > 0(13462) uri: <sip:sip.net4india.com>
> > > > 0(13462) version: <SIP/2.0>
> > > > 0(13462) parse_headers: flags=1
> > > > 0(13462) end of header reached, state=5
> > > > 0(13462) parse_headers: Via found, flags=1
> > > > 0(13462) parse_headers: this is the first via
> > > > 0(13462) After parse_msg...
> > > > 0(13462) preparing to run routing scripts...
> > > > 0(13462) DEBUG : is_maxfwd_present: searching for max_forwards
header
> > > > 0(13462) parse_headers: flags=128
> > > > 0(13462) DEBUG: is_maxfwd_present: value = 70
> > > > 0(13462) parse_headers: flags=8
> > > > 0(13462) DEBUG: add_param: tag=0809578b00894f62bdb457bee0c4234b
> > > > 0(13462) DEBUG: add_param: epid=85dccaccd6
> > > > 0(13462) end of header reached, state=29
> > > > 0(13462) parse_headers: flags=256
> > > > 0(13462) end of header reached, state=9
> > > > 0(13462) DEBUG: get_hdr_field: <To> [30];
> > uri=[sip:1111 at sip.net4india.com]
> > > > 0(13462) DEBUG: to body [<sip:1111 at sip.net4india.com>
> > > > ]
> > > > 0(13462) get_hdr_field: cseq <CSeq>: <2> <REGISTER>
> > > > 0(13462) DEBUG: get_hdr_body : content_length=0
> > > > 0(13462) found end of header
> > > > 0(13462) find_first_route(): No Route headers found
> > > > 0(13462) loose_route(): There is no Route HF
> > > > 0(13462) REGISTER: Authenticating user
> > > > 0(13462) check_nonce(): comparing
> > > > [3fb37a088e0d83f2084b0221f11e7ac8d6709be0] and
> > > > [3fb37a088e0d83f2084b0221f11e7ac8d6709be0]
> > > > 0(13462) radius_authorize_sterman(): Failure
> > > > 0(13462) REGISTER: challenging user
> > > > 0(13462) build_auth_hf(): 'WWW-Authenticate: Digest
> > > > realm="sip.net4india.com",
nonce="3fb37a088e0d83f2084b0221f11e7ac8d6709b
> > > > e0", qop="auth"
> > > > '
> > > > 0(13462) parse_headers: flags=-1
> > > > 0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0)
> > > > 0(13462) receive_msg: cleaning up
> > > >
> > > > ----- Original Message -----
> > > > From: "Daniel-Constantin Mierla"
> > > > <Daniel-Constantin.Mierla at fokus.fraunhofer.de>
> > > > To: "Madan" <madan.r at net4india.net>
> > > > Cc: "serusers" <serusers at lists.iptel.org>
> > > > Sent: Thursday, November 13, 2003 5:01 PM
> > > > Subject: Re: [Serusers] ser/radius
> > > >
> > > >
> > > > Hello,
> > > > please increase the debug level to a higher value (debug=9), try
again
> > > > and send the logs to us. From your previous mail on the seruser list
> > > > (subj: radius issue) seems that the Radius server authenticates OK
the
> > > > user.
> > > > }Daniel
> > > >
> > > > On 11/13/2003 12:08 PM, Madan wrote:
> > > >
> > > > ----ser.cfg------------
> > > >
> > > >
> > > > #
> > > > # ----------- global configuration
parameters ------------------------
> > > > debug=3 # debug level (cmd line: -dddddddddd)
> > > > fork=no
> > > > log_stderror=yes # (cmd line: -E)
> > > > listen=202.71.135.219
> > > > /* Uncomment these lines to enter debugging mode
> > > > debug=7
> > > > fork=no
> > > > log_stderror=yes
> > > > */
> > > >
> > > > check_via=no # (cmd. line: -v)
> > > > dns=no # (cmd. line: -r)
> > > > rev_dns=no # (cmd. line: -R)
> > > > port=5060
> > > > children=4
> > > > fifo="/tmp/ser_fifo"
> > > >
> > > > # ------------------ module
loading ----------------------------------
> > > >
> > > > # Uncomment this if you want to use SQL database
> > > > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > > > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > > > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > > > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > > > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > > > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > > > loadmodule "/usr/local/lib/ser/modules/acc.so"
> > > > loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> > > >
> > > >
> > > > # ----------------- setting module-specific
parameters ---------------
> > > >
> > > > # -- usrloc params --
> > > >
> > > > modparam("usrloc", "db_mode", 2)
> > > > modparam("auth_radius",
> > > > "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> > > > modparam("auth_radius", "service_type", 15)
> > > >
> > > > # -- rr params --
> > > > # add value to ;lr param to make some broken UAs happy
> > > > modparam("rr", "enable_full_lr", 1)
> > > > #modparam("acc", "log_level", 1)
> > > > #modparam("acc", "radius_flag", 1)
> > > >
> > > > # ------------------------- request routing
logic -------------------
> > > > # main routing logic
> > > >
> > > > route{
> > > > # initial sanity checks -- messages with
> > > > # max_forwards==0, or excessively long requests
> > > > if (!mf_process_maxfwd_header("10")) {
> > > > sl_send_reply("483","Too Many Hops");
> > > > break;
> > > > };
> > > > if (len_gt( max_len )) {
> > > > sl_send_reply("513", "Message too big");
> > > > break;
> > > > };
> > > >
> > > >
> > > >
> > > > # we record-route all messages -- to make sure that
> > > > # subsequent messages will go through our proxy; that's
> > > > # particularly good if upstream and downstream entities
> > > > # use different transport protocol
> > > > record_route();
> > > > # loose-route processing
> > > > if (loose_route()) {
> > > > t_relay();
> > > > break;
> > > > };
> > > >
> > > > # if the request is for other domain use UsrLoc
> > > > # (in case, it does not work, use the following command
> > > > # with proper names and addresses in it)
> > > >
> > > > if (method=="REGISTER") {
> > > >
> > > > log(1, "REGISTER: Authenticating user\n");
> > > >
> > > > if (!radius_www_authorize("")) {
> > > > log(1, "REGISTER: challenging user\n");
> > > > www_challenge("", "2");
> > > > break;
> > > > };
> > > > save("location");
> > > > break;
> > > > };
> > > >
> > > >
> > > > if (method=="INVITE") {
> > > >
> > > > log(1, "INVITE\n");
> > > > setflag(1); /* set for accounting (the same value as
in
> > > > log_flag!) */
> > > > };
> > > >
> > > > if (method=="MESSAGE") {
> > > > log(1, "MESSAGE\n");
> > > > setflag(1); /* set for accounting (the same value as
in
> > > > log_flag!) */
> > > > };
> > > >
> > > > if (method=="BYE" || method=="CANCEL") {
> > > > log (1, "BYE or CANCEL\n");
> > > > setflag(1);
> > > > };
> > > >
> > > > # native SIP destinations are handled using our USRLOC DB
> > > > if (!lookup("location")) {
> > > > sl_send_reply("404", "Not Found");
> > > > break;
> > > > };
> > > > if (!t_relay()) {
> > > > sl_reply_error();
> > > > break;
> > > > };
> > > >
> > > >
> > > > }
> > > >
> > > >
> > > > -----------------logs---------
> > > >
> > > > 0(13437) mod_init(): Database connection opened successfuly
> > > > acc - initializing
> > > > 0(0) INFO: udp_init: SO_RCVBUF is initially 65535
> > > > 0(0) INFO: udp_init: SO_RCVBUF is finally 262142
> > > > 2(13439) INFO: fifo process starting: 13439
> > > > 2(13439) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo...
> > > > 0(13437) REGISTER: Authenticating user
> > > > 0(13437) REGISTER: challenging user
> > > > 0(13437) REGISTER: Authenticating user
> > > > 0(13437) REGISTER: challenging user
> > > > 0(13437) REGISTER: Authenticating user
> > > > 0(13437) REGISTER: challenging user
> > > >
> > > > i can not get my sipua registered, please help me to get out of this
> > > >
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Daniel-Constantin Mierla"
> > > > <Daniel-Constantin.Mierla at fokus.fraunhofer.de>
> > > > To: "Santosh M Hulkund" <santoshmh at indts.com>
> > > > Cc: <serusers at lists.iptel.org>
> > > > Sent: Thursday, November 13, 2003 3:42 PM
> > > > Subject: Re: [Serusers] Integrating Ser to Jabberd
> > > >
> > > >
> > > >
> > > >
> > > > Hello,
> > > > try with this one:
> > > > http://www.iptel.org/ser/doc/jabgw/xjab-manual.html
> > > >
> > > > Best regards,
> > > > }Daniel
> > > >
> > > > On 11/13/2003 8:01 AM, Santosh M Hulkund wrote:
> > > >
> > > >
> > > >
> > > > Hi Gurus,
> > > >
> > > > Is there any clear document on integrating ser with jabberd.
> > > >
> > > > Any pointers, greatly appreciated.
> > > >
> > > > Regards,
> > > > Santosh M Hulkund
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> > > >
> > > >
> > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> > >
> >
>
More information about the sr-users
mailing list