[Serusers] ser/radius
Jan Janak
jan at iptel.org
Thu Nov 13 23:33:23 CET 2003
Hello,
>From the attached logs I would say that the authentication in radius
server succeeded, because it returns "Authenticated".
If ser doesn't authenticate in this case then you proabably:
- didn't updated dictionaries properly
- configured wrong secret
Read the ser-radius howto again and make sure that you have configured
everything properly.
Jan.
On 13-11 18:10, Madan wrote:
> here is the log file of radius
>
> -=-------radiuslogs---------------------
>
>
> rad_recv: Access-Request packet from host 202.71.135.219:32770, id=205, length=286
> User-Name = "2222 at sip.net4india.com"
> Digest-Attributes = "\n\0062222"
> Digest-Attributes = "\001\023sip.net4india.com"
> Digest-Attributes = "\002*3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4"
> Digest-Attributes = "\004\027sip:sip.net4india.com"
> Digest-Attributes = "\003\nREGISTER"
> Digest-Attributes = "\005\006auth"
> Digest-Attributes = "\t\n00000003"
> Digest-Attributes = "\010"EDB2B98710FD4AC6B4022AD2E3A83BFF"
> Digest-Response = "3c3d66cbf7c39f286d2cb37e3c8caa37"
> Service-Type = Sip-Session
> Sip-Uri-User = "2222 at sip.net4india.com"
> NAS-IP-Address = 202.71.135.219
> NAS-Port = 5060
> modcall: entering group authorize for request 0
> modcall[authorize]: module "preprocess" returns ok for request 0
> rlm_digest: Converting Digest-Attributes to something sane...
> Digest-User-Name = "2222"
> Digest-Realm = "sip.net4india.com"
> Digest-Nonce = "3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4"
> Digest-Uri = "sip:sip.net4india.com"
> Digest-Method = "REGISTER"
> Digest-Qop = "auth"
> Digest-Nonce-Count = "00000003"
> Digest-Cnonce = "EDB2B98710FD4AC6B4022AD2E3A83BFF"
> rlm_digest: Adding Auth-Type = DIGEST
> modcall[authorize]: module "digest" returns ok for request 0
> modcall[authorize]: module "chap" returns noop for request 0
> rlm_eap: EAP-Message not found
> modcall[authorize]: module "eap" returns noop for request 0
> rlm_digest: Converting Digest-Attributes to something sane...
> Digest-User-Name = "2222"
> Digest-Realm = "sip.net4india.com"
> Digest-Nonce = "3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4"
> Digest-Uri = "sip:sip.net4india.com"
> Digest-Method = "REGISTER"
> Digest-Qop = "auth"
> Digest-Nonce-Count = "00000003"
> Digest-Cnonce = "EDB2B98710FD4AC6B4022AD2E3A83BFF"
> modcall[authorize]: module "digest" returns ok for request 0
> rlm_realm: Looking up realm "sip.net4india.com" for User-Name = "2222 at sip.net4india.com"
> rlm_realm: No such realm "sip.net4india.com"
> modcall[authorize]: module "suffix" returns noop for request 0
> users: Matched DEFAULT at 152
> users: Matched 2222 at sip.net4india.com at 224
> modcall[authorize]: module "files" returns ok for request 0
> modcall[authorize]: module "mschap" returns noop for request 0
> modcall: group authorize returns ok for request 0
> rad_check_password: Found Auth-Type Digest
> auth: type "DIGEST"
> modcall: entering group Auth-Type for request 0
> A1 = 2222:sip.net4india.com:test
> A2 = REGISTER:sip:sip.net4india.com
> KD = f386a675cf9d0e8941be95dac13b40d1:3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4:00000003:EDB2B98710FD4AC6B4022AD2E3A83BFF:auth
> :4f5b38da39851b9b27477c4ea50c375b
> modcall[authenticate]: module "digest" returns ok for request 0
> modcall: group Auth-Type returns ok for request 0
> radius_xlat: 'Authenticated'
> Sending Access-Accept of id 205 to 202.71.135.219:32770
> Reply-Message = "Authenticated"
> Sip-Rpid = "1234"
> Finished request 0
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 6 seconds...
> --- Walking the entire request list ---
> Cleaning up request 0 ID 205 with timestamp 3fb37f3e
>
>
>
>
> ----- Original Message -----
> From: Daniel-Constantin Mierla
> To: Madan
> Cc: serusers
> Sent: Thursday, November 13, 2003 5:58 PM
> Subject: Re: [Serusers] ser/radius
>
>
> Hello,
> now it seems that the authentication in Radius side failed :) :
>
> 0(13462) radius_authorize_sterman(): FailureSo I need the logs from Radius server, too. Better reproduce again the case and send both ser and radius logs in a mail.
>
> }Daniel
>
> On 11/13/2003 1:12 PM, Madan wrote:
>
> Hi Daniel,
> here is the debug-9 level logs
>
> 0(13462) SIP Request:
> 0(13462) method: <REGISTER>
> 0(13462) uri: <sip:sip.net4india.com>
> 0(13462) version: <SIP/2.0>
> 0(13462) parse_headers: flags=1
> 0(13462) end of header reached, state=5
> 0(13462) parse_headers: Via found, flags=1
> 0(13462) parse_headers: this is the first via
> 0(13462) After parse_msg...
> 0(13462) preparing to run routing scripts...
> 0(13462) DEBUG : is_maxfwd_present: searching for max_forwards header
> 0(13462) parse_headers: flags=128
> 0(13462) DEBUG: is_maxfwd_present: value = 70
> 0(13462) parse_headers: flags=8
> 0(13462) DEBUG: add_param: tag=b012f0317df24bc28c22c024cfa027f3
> 0(13462) DEBUG: add_param: epid=4afef3ee8a
> 0(13462) end of header reached, state=29
> 0(13462) parse_headers: flags=256
> 0(13462) end of header reached, state=9
> 0(13462) DEBUG: get_hdr_field: <To> [30]; uri=[sip:1111 at sip.net4india.com]
> 0(13462) DEBUG: to body [<sip:1111 at sip.net4india.com>
> ]
> 0(13462) get_hdr_field: cseq <CSeq>: <1> <REGISTER>
> 0(13462) DEBUG: get_hdr_body : content_length=0
> 0(13462) found end of header
> 0(13462) find_first_route(): No Route headers found
> 0(13462) loose_route(): There is no Route HF
> 0(13462) REGISTER: Authenticating user
> 0(13462) parse_headers: flags=4096
> 0(13462) pre_auth(): Credentials with given realm not found
> 0(13462) REGISTER: challenging user
> 0(13462) build_auth_hf(): 'WWW-Authenticate: Digest
> realm="sip.net4india.com", nonce="3fb37a01834a42156a764ee9df05ad19d7687a
> 23", qop="auth"
> '
> 0(13462) parse_headers: flags=-1
> 0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0)
> 0(13462) receive_msg: cleaning up
> 0(13462) SIP Request:
> 0(13462) method: <REGISTER>
> 0(13462) uri: <sip:sip.net4india.com>
> 0(13462) version: <SIP/2.0>
> 0(13462) parse_headers: flags=1
> 0(13462) end of header reached, state=5
> 0(13462) parse_headers: Via found, flags=1
> 0(13462) parse_headers: this is the first via
> 0(13462) After parse_msg...
> 0(13462) preparing to run routing scripts...
> 0(13462) DEBUG : is_maxfwd_present: searching for max_forwards header
> 0(13462) parse_headers: flags=128
> 0(13462) DEBUG: is_maxfwd_present: value = 70
> 0(13462) parse_headers: flags=8
> (13462) DEBUG: add_param: tag=0809578b00894f62bdb457bee0c4234b
> 0(13462) DEBUG: add_param: epid=85dccaccd6
> 0(13462) end of header reached, state=29
> 0(13462) parse_headers: flags=256
> 0(13462) end of header reached, state=9
> 0(13462) DEBUG: get_hdr_field: <To> [30]; uri=[sip:1111 at sip.net4india.com]
> 0(13462) DEBUG: to body [<sip:1111 at sip.net4india.com>
> ]
> 0(13462) get_hdr_field: cseq <CSeq>: <1> <REGISTER>
> 0(13462) DEBUG: get_hdr_body : content_length=0
> 0(13462) found end of header
> 0(13462) find_first_route(): No Route headers found
> 0(13462) loose_route(): There is no Route HF
> 0(13462) REGISTER: Authenticating user
> 0(13462) parse_headers: flags=4096
> 0(13462) pre_auth(): Credentials with given realm not found
> 0(13462) REGISTER: challenging user
> 0(13462) build_auth_hf(): 'WWW-Authenticate: Digest
> realm="sip.net4india.com", nonce="3fb37a088e0d83f2084b0221f11e7ac8d6709b
> e0", qop="auth"
> '
> 0(13462) parse_headers: flags=-1
> 0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0)
> 0(13462) receive_msg: cleaning up
> 0(13462) SIP Request:
> 0(13462) method: <REGISTER>
> 0(13462) uri: <sip:sip.net4india.com>
> 0(13462) version: <SIP/2.0>
> 0(13462) parse_headers: flags=1
> 0(13462) end of header reached, state=5
> 0(13462) parse_headers: Via found, flags=1
> 0(13462) parse_headers: this is the first via
> 0(13462) After parse_msg...
> 0(13462) preparing to run routing scripts...
> 0(13462) DEBUG : is_maxfwd_present: searching for max_forwards header
> 0(13462) parse_headers: flags=128
> 0(13462) DEBUG: is_maxfwd_present: value = 70
> 0(13462) parse_headers: flags=8
> 0(13462) DEBUG: add_param: tag=0809578b00894f62bdb457bee0c4234b
> 0(13462) DEBUG: add_param: epid=85dccaccd6
> 0(13462) end of header reached, state=29
> 0(13462) parse_headers: flags=256
> 0(13462) end of header reached, state=9
> 0(13462) DEBUG: get_hdr_field: <To> [30]; uri=[sip:1111 at sip.net4india.com]
> 0(13462) DEBUG: to body [<sip:1111 at sip.net4india.com>
> ]
> 0(13462) get_hdr_field: cseq <CSeq>: <2> <REGISTER>
> 0(13462) DEBUG: get_hdr_body : content_length=0
> 0(13462) found end of header
> 0(13462) find_first_route(): No Route headers found
> 0(13462) loose_route(): There is no Route HF
> 0(13462) REGISTER: Authenticating user
> 0(13462) check_nonce(): comparing
> [3fb37a088e0d83f2084b0221f11e7ac8d6709be0] and
> [3fb37a088e0d83f2084b0221f11e7ac8d6709be0]
> 0(13462) radius_authorize_sterman(): Failure
> 0(13462) REGISTER: challenging user
> 0(13462) build_auth_hf(): 'WWW-Authenticate: Digest
> realm="sip.net4india.com", nonce="3fb37a088e0d83f2084b0221f11e7ac8d6709b
> e0", qop="auth"
> '
> 0(13462) parse_headers: flags=-1
> 0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0)
> 0(13462) receive_msg: cleaning up
>
> ----- Original Message -----
> From: "Daniel-Constantin Mierla"
> <Daniel-Constantin.Mierla at fokus.fraunhofer.de>
> To: "Madan" <madan.r at net4india.net>
> Cc: "serusers" <serusers at lists.iptel.org>
> Sent: Thursday, November 13, 2003 5:01 PM
> Subject: Re: [Serusers] ser/radius
>
>
> Hello,
> please increase the debug level to a higher value (debug=9), try again
> and send the logs to us. From your previous mail on the seruser list
> (subj: radius issue) seems that the Radius server authenticates OK the
> user.
> }Daniel
>
> On 11/13/2003 12:08 PM, Madan wrote:
>
> ----ser.cfg------------
>
>
> #
> # ----------- global configuration parameters ------------------------
> debug=3 # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=yes # (cmd line: -E)
> listen=202.71.135.219
> /* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
>
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> modparam("usrloc", "db_mode", 2)
> modparam("auth_radius",
> "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> modparam("auth_radius", "service_type", 15)
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> #modparam("acc", "log_level", 1)
> #modparam("acc", "radius_flag", 1)
>
> # ------------------------- request routing logic -------------------
> # main routing logic
>
> route{
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if (len_gt( max_len )) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
>
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
>
> if (method=="REGISTER") {
>
> log(1, "REGISTER: Authenticating user\n");
>
> if (!radius_www_authorize("")) {
> log(1, "REGISTER: challenging user\n");
> www_challenge("", "2");
> break;
> };
> save("location");
> break;
> };
>
>
> if (method=="INVITE") {
>
> log(1, "INVITE\n");
> setflag(1); /* set for accounting (the same value as in
> log_flag!) */
> };
>
> if (method=="MESSAGE") {
> log(1, "MESSAGE\n");
> setflag(1); /* set for accounting (the same value as in
> log_flag!) */
> };
>
> if (method=="BYE" || method=="CANCEL") {
> log (1, "BYE or CANCEL\n");
> setflag(1);
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> if (!t_relay()) {
> sl_reply_error();
> break;
> };
>
>
> }
>
>
> -----------------logs---------
>
> 0(13437) mod_init(): Database connection opened successfuly
> acc - initializing
> 0(0) INFO: udp_init: SO_RCVBUF is initially 65535
> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142
> 2(13439) INFO: fifo process starting: 13439
> 2(13439) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo...
> 0(13437) REGISTER: Authenticating user
> 0(13437) REGISTER: challenging user
> 0(13437) REGISTER: Authenticating user
> 0(13437) REGISTER: challenging user
> 0(13437) REGISTER: Authenticating user
> 0(13437) REGISTER: challenging user
>
> i can not get my sipua registered, please help me to get out of this
>
>
>
>
> ----- Original Message -----
> From: "Daniel-Constantin Mierla"
> <Daniel-Constantin.Mierla at fokus.fraunhofer.de>
> To: "Santosh M Hulkund" <santoshmh at indts.com>
> Cc: <serusers at lists.iptel.org>
> Sent: Thursday, November 13, 2003 3:42 PM
> Subject: Re: [Serusers] Integrating Ser to Jabberd
>
>
>
>
> Hello,
> try with this one:
> http://www.iptel.org/ser/doc/jabgw/xjab-manual.html
>
> Best regards,
> }Daniel
>
> On 11/13/2003 8:01 AM, Santosh M Hulkund wrote:
>
>
>
> Hi Gurus,
>
> Is there any clear document on integrating ser with jabberd.
>
> Any pointers, greatly appreciated.
>
> Regards,
> Santosh M Hulkund
>
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
>
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list