[Serusers] ser.cfg for PSTN GW

[Younger Wang]

If you are using following scripts, then you problem may be caused by the
additional ^ after =~ expression. I am a new comer to both SER and RegEx, so
I do not know why this ^ is added in some of the example scripts. Remove it
and try again.

______________________
if (uri=~"^sip:[0-9]*") {
     forward (192.168.15.41,5060);   # 192.168.15.41 is my CISCO SIP2PSTN
~~~~~~~~~~~~~~~~~~~~~~

Younger Wang



----- Original Message ----- 
From: Jade Chen Yan
To: 'Younger Wang'
Sent: Thursday, June 19, 2003 12:15 AM
Subject: RE: [Serusers] ser.cfg for PSTN GW


thank u very much.

my configuration.
serrouter 's IP addr : 172.30.10.230
the PSTN  GW addr:  192.168.15.41  at the gateway, there is a phone num 8010

the invite uri from my sipphone to SER is "sip:8010 at 172.30.10.230"
I hope after the  statement  rewritehostport("192.168.15.41:5060");  the
invite message's uri will be changed to  "sip: 8010 at 192.168.15.41"
but from the CISCO's GW, i found the uri is the same as the original. that
is :"sip:8010 at 172.30.10.230"
so the GW return an 400 invalid IP addr error.

Regards,
Jade


-----Original Message-----
From: Younger Wang [mailto:wygmail at yeah.net]
Sent: Friday, June 20, 2003 6:00 AM
To: jade(陈雁); serusers at lists.iptel.org
Subject: Re: [Serusers] ser.cfg for PSTN GW



It seems ok with your syntax. Should you give more detail?


----- Original Message -----
From: Jade Chen Yan <mailto:jade at tencent.com>
To: 'Younger Wang' <mailto:wygmail at yeah.net>  ; serusers at lists.iptel.org
Sent: Wednesday, June 18, 2003 11:46 PM
Subject: RE: [Serusers] ser.cfg for PSTN GW

thank u for your kindly reply . the ser can be started. by I alway got the
400 "invilid ip addr"error.

i use the following to provide the GW IP
    #forward (192.168.15.41,5060);
     #rewritehostport("192.168.15.41:5060");
     t_relay_to( "192.168.15.41", "5060");
each of which cannot work out .got the same error.

can u give me other suggestions.?


-----Original Message-----
From: Younger Wang [mailto:wygmail at yeah.net]
Sent: Friday, June 20, 2003 4:51 AM
To: jade(陈雁); serusers at lists.iptel.org
Subject: Re: [Serusers] ser.cfg for PSTN GW


Please add a semicolon ';'  after the last '}'

Younger Wang

----- Original Message -----
From: Jade Chen Yan <mailto:jade at tencent.com>
To: serusers at lists.iptel.org
Sent: Wednesday, June 18, 2003 10:41 PM
Subject: [Serusers] ser.cfg for PSTN GW

hi, all,

whenever I add the following lines in  the ser.cfg, the ser cannot start up.
:
#for PSTN gateway
  if (uri=~"^sip:[0-9]*") {
     forward (192.168.15.41,5060);   # 192.168.15.41 is my CISCO SIP2PSTN
GW.
    #rewritehostport("192.168.15.41","5060")
      break;
  }

I just add in the  default ser.cfg.
when I comment these lines. the ser can be started.
 if (uri==myself) {

  if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
#   if (!www_authorize("iptel.org", "subscriber")) {
#    www_challenge("iptel.org", "0");
#    break;
#   };

   save("location");
   break;
  };

  #for PSTN gateway
  #if (uri=~"sip:8010") {
  #   forward (192.168.15.41,5060);
  #   #rewritehostport("192.168.15.41","5060")
      #   break;
  #}

  # native SIP destinations are handled using our USRLOC DB
  if (!lookup("location")) {
   sl_send_reply("404", "Not Found");
   break;
  };
 };

can anyone tell me what 's wrong with these line.


Best Regards,
Jade






  _____






_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers