[Serusers] X-Lite and SER (again) New info
Marcelo Schmidt
mschmidt at equinix.com
Wed Jul 23 19:54:39 CEST 2003
I am using 8.11 with mixed version of xLite 1.x and the new 2.0 without
problems. I am looking into the interface to see if there's any
significant change. I'll get back to you later.
-m
-----Original Message-----
From: Maxim Sobolev [mailto:sobomax at portaone.com]
Sent: Wednesday, July 23, 2003 10:51 AM
To: Jesus Rodriguez
Cc: serusers at lists.iptel.org
Subject: Re: [Serusers] X-Lite and SER (again) New info
You are better off to contact X-Ten instead, because it is clearly a
problem with X-Lite, not SER.
-Maxim
Jesus Rodriguez wrote:
> Hello,
>
> I'm sorry to come back again with this topic :( ... i've installed a
> new SER from cvs (rel_0_8_11) and when trying to register X-Lite 2.0,
> X-Lite does not send authentication information. As before, i can
> register an ATA186, a SNOM 100 phone and SIPPS but no X-Lite. I think
> the problem is in my X-Lite configuration and that it's my fault but
> after looking up and down i can't find the problem.
>
> This is X-Lite configuration:
>
> SIP Proxy
> Enabled: yes
> User Name: 1000
> Authorization user: 1000
> Password: 1000
> Domain/Realm: voztelecom.net
> SIP Proxy: 192.168.1.2:5060
> Out Bound Proxy:
> Proxy Mode: Normal
> Send Internal IP: Off
>
>
> These are the X-Lite logs. The most strange thing is that it does not
> answer the auth requests from SER (below is Cisco ATA REGISTER log and
> SER
> configuration):
>
> SEND >> 192.168.1.2:5060
> REGISTER sip:voztelecom.net SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.203:5060
> From: <sip:1000 at voztelecom.net>
> To: <sip:1000 at voztelecom.net>
> Contact: "JesusR" <sip:1000 at 192.168.1.203:5060>
> Call-ID: 3148BBBEBC4F47F2A43768FD845E6663 at voztelecom.net
> CSeq: 11222 REGISTER
> Expires: 500
> User-Agent: X-Lite build 1047
> Content-Length: 0
>
>
> RECEIVE << 192.168.1.2:5060
> SIP/2.0 401 Unauthorized
> Via: SIP/2.0/UDP 192.168.1.203:5060
> From: <sip:1000 at voztelecom.net>
> To:
> <sip:1000 at voztelecom.net>;tag=b27e1a1d33761e85846fc98f5f3a7e58.d844
> Call-ID: 3148BBBEBC4F47F2A43768FD845E6663 at voztelecom.net
> CSeq: 11222 REGISTER
> WWW-Authenticate: Digest realm="voztelecom.net",
> nonce="3f1ebf0bae9c2713e34ed6c6c066884d61da2c46"
> Server: Sip EXpress router (0.8.11rc1 (i386/linux))
> Content-Length: 0
> Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27562
req_src_ip=192.168.1.203 req_src_port=5060 in_uri=sip:voztelecom.net
out_uri=sip:voztelecom.net via_cnt==1"
>
>
> RECEIVE << 192.168.1.2:5060
> SIP/2.0 401 Unauthorized
> Via: SIP/2.0/UDP 192.168.1.203:5060
> From: <sip:1000 at voztelecom.net>
> To:
> <sip:1000 at voztelecom.net>;tag=b27e1a1d33761e85846fc98f5f3a7e58.d844
> Call-ID: 3148BBBEBC4F47F2A43768FD845E6663 at voztelecom.net
> CSeq: 11222 REGISTER
> WWW-Authenticate: Digest realm="voztelecom.net",
> nonce="3f1ebf0bae9c2713e34ed6c6c066884d61da2c46"
> Server: Sip EXpress router (0.8.11rc1 (i386/linux))
> Content-Length: 0
> Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27563
req_src_ip=192.168.1.203 req_src_port=5060 in_uri=sip:voztelecom.net
out_uri=sip:voztelecom.net via_cnt==1"
>
>
> SEND >> 192.168.1.2:5060
> REGISTER sip:voztelecom.net SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.203:5060
> From: <sip:1000 at voztelecom.net>
> To: <sip:1000 at voztelecom.net>
> Contact: "JesusR" <sip:1000 at 192.168.1.203:5060>
> Call-ID: 3148BBBEBC4F47F2A43768FD845E6663 at voztelecom.net
> CSeq: 11224 REGISTER
> Expires: 500
> User-Agent: X-Lite build 1047
> Content-Length: 0
>
>
> RECEIVE << 192.168.1.2:5060
> SIP/2.0 401 Unauthorized
> Via: SIP/2.0/UDP 192.168.1.203:5060
> From: <sip:1000 at voztelecom.net>
> To:
> <sip:1000 at voztelecom.net>;tag=b27e1a1d33761e85846fc98f5f3a7e58.d844
> Call-ID: 3148BBBEBC4F47F2A43768FD845E6663 at voztelecom.net
> CSeq: 11224 REGISTER
> WWW-Authenticate: Digest realm="voztelecom.net",
> nonce="3f1ebf0fe0eb06e006bfa17508318525b23a1672"
> Server: Sip EXpress router (0.8.11rc1 (i386/linux))
> Content-Length: 0
> Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27562
req_src_ip=192.168.1.203 req_src_port=5060 in_uri=sip:voztelecom.net
out_uri=sip:voztelecom.net via_cnt==1"
>
>
> RECEIVE << 192.168.1.2:5060
> SIP/2.0 401 Unauthorized
> Via: SIP/2.0/UDP 192.168.1.203:5060
> From: <sip:1000 at voztelecom.net>
> To:
> <sip:1000 at voztelecom.net>;tag=b27e1a1d33761e85846fc98f5f3a7e58.d844
> Call-ID: 3148BBBEBC4F47F2A43768FD845E6663 at voztelecom.net
> CSeq: 11224 REGISTER
> WWW-Authenticate: Digest realm="voztelecom.net",
> nonce="3f1ebf0fe0eb06e006bfa17508318525b23a1672"
> Server: Sip EXpress router (0.8.11rc1 (i386/linux))
> Content-Length: 0
> Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27563
req_src_ip=192.168.1.203 req_src_port=5060 in_uri=sip:voztelecom.net
out_uri=sip:voztelecom.net via_cnt==1"
>
>
> This is Cisco ATA REGISTER log which send the reply to auth request
> from SER:
>
>
>>>SIP <<
>
> Trying 1st IP ADDR c0a80102
> proxy=192.168.1.2:5060
> [0]REGISTER Retry 0
> [0:0] Tx Msg to 192.168.1.2:5060
>
> REGISTER sip:192.168.1.2 SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.202:5060
> From: <sip:1001 at 192.168.1.2;user=phone>;tag=4183361925
> To: <sip:1001 at 192.168.1.2;user=phone>
> Call-ID: 2881434130 at 192.168.1.202
> CSeq: 1 REGISTER
> Contact:
> <sip:1001 at 192.168.1.202:5060;user=phone;transport=udp>;expires=60
> User-Agent: Cisco ATA 186 v2.16 ata18x (030401a)
> Content-Length: 0
>
>
> [0]Rx Msg from 192.168.1.2:5060
>
> SIP/2.0 401 Unauthorized
> Via: SIP/2.0/UDP 192.168.1.202:5060
> From: <sip:1001 at 192.168.1.2;user=phone>;tag=4183361925
> To:
>
<sip:1001 at 192.168.1.2;user=phone>;tag=b27e1a1d33761e85846fc98f5f3a7e58.9
cf4
> Call-ID: 2881434130 at 192.168.1.202
> CSeq: 1 REGISTER
> WWW-Authenticate: Digest realm="voztelecom.net",
nonce="3f1ec1149f7590fd4532ba8c63a36a9123360fa0"
> Server: Sip EXpress router (0.8.11rc1 (i386/linux))
> Content-Length: 0
> Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27563
req_src_ip=192.168.1.202 req_src_port=5060 in_uri=sip:192.168.1.2
out_uri=sip:192.168.1.2 via_cnt==1"
>
>
> [0]Reg Resp 401; Unauthorized
> [0]REGISTER Retry 0
> [0:0] Tx Msg to 192.168.1.2:5060
>
> REGISTER sip:192.168.1.2 SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.202:5060
> From: <sip:1001 at 192.168.1.2;user=phone>;tag=4183361925
> To: <sip:1001 at 192.168.1.2;user=phone>
> Call-ID: 2881434130 at 192.168.1.202
> CSeq: 2 REGISTER
> Contact:
> <sip:1001 at 192.168.1.202:5060;user=phone;transport=udp>;expires=60
> User-Agent: Cisco ATA 186 v2.16 ata18x (030401a)
> Authorization: Digest
>
username="1001",realm="voztelecom.net",nonce="3f1ec1149f7590fd4532ba8c63
a36a9123360fa0",uri="sip:192.168.1.2",response="9cedb192d83009a19e3bf610
c2d13b85"
> Content-Length: 0
>
>
> [0]Rx Msg from 192.168.1.2:5060
>
> SIP/2.0 200 OK
> Via: SIP/2.0/UDP 192.168.1.202:5060
> From: <sip:1001 at 192.168.1.2;user=phone>;tag=4183361925
> To:
>
<sip:1001 at 192.168.1.2;user=phone>;tag=b27e1a1d33761e85846fc98f5f3a7e58.9
cf4
> Call-ID: 2881434130 at 192.168.1.202
> CSeq: 2 REGISTER
> Contact:
<sip:1001 at 192.168.1.202:5060;user=phone;transport=udp>;q=0.00;expires=60
> Server: Sip EXpress router (0.8.11rc1 (i386/linux))
> Content-Length: 0
> Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27562
req_src_ip=192.168.1.202 req_src_port=5060 in_uri=sip:192.168.1.2
out_uri=sip:192.168.1.2 via_cnt==1"
>
> [0]Reg Resp 200; OK
> [0]Reg OK (60)
>
>
>
> And this is SER configuration:
>
> #
> # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> debug=3 # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=yes # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
>
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> #modparam("usrloc", "db_mode", 0)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
> modparam("usrloc","db_url","sql://ser:heslo@192.168.1.3/ser")
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db","db_url","sql://ser:heslo@192.168.1.3/ser")
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this
> config), # uncomment also the following parameter) #
> modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy modparam("rr",
> "enable_full_lr", 1)
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
> alias="voztelecom.net"
> alias="devel.voztelecom.net"
> alias="192.168.1.2"
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if (len_gt( max_len )) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
> # if (uri=~"voztelecom.net" || uri=~"192\.168\.1\.2") {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> if (!www_authorize("voztelecom.net",
"subscriber")) {
> www_challenge("voztelecom.net", "0");
> break;
> };
>
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our USRLOC
DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
> }
>
>
> Thanks in advance for your help.
>
> Saludos
> JesusR.
>
> -------------------------------
> Jesus Rodriguez
> VozTelecom Sistemas, S.L.
> jesusr at voztele.com
> http://www.voztele.com
> Tel. 902360305
> -------------------------------
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
_______________________________________________
Serusers mailing list
serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list