[Serusers] Re: Troubles using b2bua as a accounting and call duration limiting module for SER router
Maxim Sobolev
sobomax at portaone.com
Mon Jan 20 21:27:52 CET 2003
On Mon, Jan 20, 2003 at 12:01:52PM -0800, Surendra Prajapat wrote:
> Hi Maxim,
> See my comments inline.
> At 09:32 PM 1/20/2003 +0200, Maxim Sobolev wrote:
> >On Mon, Jan 20, 2003 at 10:50:42AM -0800, Surendra Prajapat wrote:
> >> Hi Maxim,
> >> Which version is b2bUa are you running ?
> >
> >1.4.0.
> >
> >> Can you try the test without
> >> SER proxy and see if you still have 200 Ok getting re-transmitted ?
> >> there is an outstanding bug
> >> http://bugzilla.vovida.org/bugzilla/show_bug.cgi?id=425 for
> >> not matching the 200 with Ack. Atleast this test would verify that.
> >>
> >> uA1---> B2bUa ---> Ua2
> >
> >Yes, with B2bUa connected directly to UAs the 200 Ok is not re-transmitted,
> >so that it is probably the same bug as described in that bug report.
> >Fortunately, the bug doesn't cause any serious problems, because B2bUa
> >thinks that the session is estabilished after sending out the first 200 Ok,
> >while the UA1 thinks that the session is established after receiving the
> >first 200 Ok.
> >
> >I've also noticed another problem with SIP stack - when the b2bua
> >for some reason can't contact second Ua it doesn't send Session Timeout,
>
> The session time-out is sent only when two parties in call. However in
> scenario you
> are describing when b2bua can not connect to second UA or fail to authorize,
> the request time-outs or auth failed would trigger the cancel from b2bUa.
> Have you tried
> the scenario when UA2 is not on-line and b2bUa tried reaching it ? Do you
> see the behavior different ?
This is exactly the scenario I am having problem with. Seemingly, when UA2 is
off-line, B2BUA tries to contact it several times, but then just gives up
without sending 4xx Request Timeout message to UA1 as it is expected to.
> >as it expected to, therefore relying on uA1 sending Cancel to abort the
> >transaction. This probably can lead to a memory leak, if for some reason
> >(i.e. network congession, UA1 power-off etc) no Cancel from UA1 is received
> >at all.
> >
> >Yet another problem discovered is that pthreads support is somehow
> >Linux-specific - when I'm compiling b2bua on FreeBSD with native pthreads
> >the b2bua dumps core when sending accounting request to the radius. The
> >problem doesn't pop up when I'm compiling b2bua on FreeBSD using
> >linuxthreads
>
> May be someone in community may help on this.
Would be really nice.
BTW, is there any ongoing work on adding support for Digest-based radius
authentification into b2bua as specified in the RADIUS Extension for
Digest Authentification IETF draft? Since it is necessary for us we already
started implementing it, but reinventing the wheel is not the thing we are
interested in.
-Maxim
>
> -Surendra
>
> >package for threading. If somebody is willing to help with that problem I
> >am ready to send stack traces or any other information necessary.
> >
> >Thank you in advance!
> >
> >-Maxim
> >
> >> Also if you can capture the B2bUa log with LOG_DEBUG_STACK mode
> >>
> >> ./b2bUa -d -v LOG_DEBUG_STACK -c <config_file>
> >>
> >> that can also help debug the problem.
> >>
> >> -Surendra
> >>
> >>
> >> At 08:22 PM 1/18/2003 +0200, Maxim Sobolev wrote:
> >> >Dear Sirs,
> >> >
> >> >I am having some strange problems when trying to use b2bua for
> >> >accounting and call duration limiting with SER proxy server. The idea
> >> >is simple: since the SER can route SIP messages depending on their
> >> >source address, we can force incoming SIP messages to be passed to
> >> >B2BUA for accounting purposes first, and after the same request
> >> >re-enters the proxy from B2BUA pass it to the final destination. Call
> >> >flow looks like the following:
> >> >
> >> > -----
> >> > |UA2|
> >> > -----
> >> > ^
> >> > |
> >> > |4
> >> > |
> >> > ----- 3 -------
> >> >----- 1 | |<-----------| |
> >> >|UA1|---->|SER| 2 |B2BUA|
> >> >----- | |----------->| |
> >> > ----- -------
> >> >
> >> >For some reason, it doesn't work in such configuration. The problem is
> >> >that B2BUA's UAC keeps resending `200 OK' replies ingnoring ACKs it
> >> >receives from UA2 until timeout hits, after which it considers the
> >> >call dead, despite the fact that both UA1 and UA2 think that the call
> >> >is established. Maybe it has something to do with the fact that it
> >> >sends to and receives messages from the same host (SER), but I don't
> >> >think that this should be a problem, since those two call legs have
> >> >different call id's, so that b2bua should be able to distinguish
> >> >between them easily. Attached please find tcpdump logs of one such
> >> >session, here 192.168.1.1 is UA1 (originating), 192.168.0.9 is UA2,
> >> >192.168.1.100 is the host running both SER and B2BUA (the former uses
> >> >port 5060, while the latter - 5065). There are two files:
> >> >ser-b2bua.log is the log of udp exchange between SER and B2BUA and
> >> >ser-ua1ua2.log - log of exchange between SER and UA1/UA2.
> >> >
> >> >Any ideas are appreciated.
> >> >
> >> >Thanks!
> >> >
> >> >-Maxim
> >> >
> >> ><B2BUA_Configuration>
> >> > <SIP>
> >> > <Local>
> >> > <Port>5065</Port>
> >> > <Transport>UDP</Transport>
> >> > </Local>
> >> > <Proxy_Server>
> >> > <Address>192.168.1.100</Address>
> >> > <Port>5060</Port>
> >> > </Proxy_Server>
> >> > <Registration>
> >> > <Register>no</Register>
> >> > <Address>vocal.vovida.org</Address>
> >> > <Port>5060</Port>
> >> > <Expires>600</Expires>
> >> > </Registration>
> >> > </SIP>
> >> > <RADIUS>
> >> > <Local>
> >> > <Authentication_Port>1812</Authentication_Port>
> >> > <Accounting_Port>1812</Accounting_Port>
> >> > </Local>
> >> > <Billing_Server>
> >> > <Address>170.76.16.48</Address>
> >> > <Authentication_Port>8765</Authentication_Port>
> >> > <Accounting_Port>8765</Accounting_Port>
> >> > <Password>vovida</Password>
> >> > </Billing_Server>
> >> > </RADIUS>
> >> > <PrePaid>
> >> > <Billing>
> >> > <Option>free</Option>
> >> > <Refresh_Time>60</Refresh_Time>
> >> > <Extract_User_Id_From>Proxy-Authorization</Extract_User_Id_From>
> >> > <User_Id_Decode_Scheme>Basic</User_Id_Decode_Scheme>
> >> > </Billing>
> >> > <Use_SIP_INFO>no</Use_SIP_INFO>
> >> > <Use_HTTP>no</Use_HTTP>
> >> > </PrePaid>
> >> > <Redundancy />
> >> ></B2BUA_Configuration>
> >>
>
More information about the sr-users
mailing list