[Serusers] problem with loading compiled radius modules

Jan Janak J.Janak at sh.cvut.cz
Fri Feb 14 11:48:45 CET 2003


Hello,

set fork=no and log_stderror=yes and try to start the server. It should
tell you where the problem is. After you resolve the problem, change it
back. ser uses syslog if log_stderror is set to no.

  regards, Jan.

On 14-02 11:26, Yang Xiang wrote:
> Hi Jan,
> 
> I have successfully compiled the radius modules radius_acc.so and radius_auth.so. But when I try to load the both modules ser tells me:
> 
> ERROR: bad config file (2 errors)
> 
> I use the solaris binary package from iptel and have compiled myself only the both radius modules. Is there any incompability? How can I get mor debug information?
> 
> Regards,
> 
> Yang
> -----------------------------------
> My config file:
> 
> debug=7          # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=no # (cmd line: -E)
> check_via=no    # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> #loadmodule "/usr/local/lib/ser/modules/mysql.so"
> 
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/radius_acc.so"
> loadmodule "/usr/local/lib/ser/modules/radius_auth.so"
> 
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> #loadmodule "/usr/local/lib/ser/modules/auth.so"
> 
> # ----------------- setting module-specific parameters ---------------
> 
> # -- usrloc params --
> 
> modparam("usrloc", "db_mode",   0)
> 
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> #modparam("usrloc", "db_mode", 2)
> 
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
> #modparam("auth", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> #modparam("auth", "password_column", "password")
> 
> # -------------------------  request routing logic -------------------
> 
> # main routing logic
> alias="pix-demo.fhg.de"
> 
> route{
> 
>         # initial sanity checks -- messages with
>         # max_forwars==0, or excessively long requests
>         if (!mf_process_maxfwd_header("10")) {
>                 sl_send_reply("483","Too Many Hops");
>                 break;
>         };
>         if (len_gt( max_len )) {
>                 sl_send_reply("513", "Message too big");
>                 break;
>         };
> 
>         # Do strict routing if pre-loaded route headers present
>         rewriteFromRoute();
> 
>         # if the request is for other domain use UsrLoc
>         # (in case, it does not work, use the following command
>         # with proper names and addresses in it)
>         if (uri==myself) {
> 
>                 if (method=="REGISTER") {
> 
> # Uncomment this if you want to use digest authentication
> #                       if (!www_authorize("iptel.org", "subscriber")) {
> #                               www_challenge("iptel.org", "0");
> #                               break;
> #                       };
> 
>                         save("location");
>                         break;
>                 };
> 
>                 # native SIP destinations are handled using our USRLOC DB
>                 if (!lookup("location")) {
>                         sl_send_reply("404", "Not Found");
>                         break;
>                 };
>         };
>         # forward to current uri now
>         if (!t_relay()) {
>                 sl_reply_error();
>         };
> 
> }
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20030214/1b096d32/attachment.pgp>


More information about the sr-users mailing list