[Serusers] problem with loading compiled radius modules

Yang Xiang yang.xiang at iitb.fraunhofer.de
Fri Feb 14 11:26:07 CET 2003


Hi Jan,

I have successfully compiled the radius modules radius_acc.so and radius_auth.so. But when I try to load the both modules ser tells me:

ERROR: bad config file (2 errors)

I use the solaris binary package from iptel and have compiled myself only the both radius modules. Is there any incompability? How can I get mor debug information?

Regards,

Yang
-----------------------------------
My config file:

debug=7          # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/radius_acc.so"
loadmodule "/usr/local/lib/ser/modules/radius_auth.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
#modparam("auth", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth", "password_column", "password")

# -------------------------  request routing logic -------------------

# main routing logic
alias="pix-demo.fhg.de"

route{

        # initial sanity checks -- messages with
        # max_forwars==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if (len_gt( max_len )) {
                sl_send_reply("513", "Message too big");
                break;
        };

        # Do strict routing if pre-loaded route headers present
        rewriteFromRoute();

        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {

                if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
#                       if (!www_authorize("iptel.org", "subscriber")) {
#                               www_challenge("iptel.org", "0");
#                               break;
#                       };

                        save("location");
                        break;
                };

                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        # forward to current uri now
        if (!t_relay()) {
                sl_reply_error();
        };

}

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20030214/21b68830/attachment.htm>


More information about the sr-users mailing list