[Serusers] help for PA can not work with MS messager 5.0

[Jan Janak]

What exactly is not working ? Do you get any 200 OK for the SUBSCRIBE
followed by a NOTIFY ?
 
 Jan.

On 04-12 11:41, hong cheng wrote:
> hi all,
> 
> Try to use presence feature with MS messager 5.0, seems SUBSCRIBER can not work.
> Can anybody have a look for the attached ser.cfg ?
> 
> Many thanks,
> hong
> 
> ----------------------------------
> 
> #debug=4        # debug level (cmd line: -dddddddddd)
> #listen=192.168.8.96
> #fork=no
> #log_stderror=yes        # (cmd line: -E)
> 
> #debug=7
> #fork=no
> #log_stderror=yes
> 
> check_via=no    # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> #loadmodule "/usr/local/lib/ser/modules/mysql.so"
> 
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/pa.so"
> 
> 
> 
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> #loadmodule "/usr/local/lib/ser/modules/auth.so"
> #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> # ----------------- setting module-specific parameters ---------------
> 
> # -- usrloc params --
> 
> modparam("usrloc", "db_mode",   0)
> 
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> #modparam("usrloc", "db_mode", 2)
> 
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column", "password")
> 
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> # -------------------------  request routing logic -------------------
> 
> # main routing logic
> 
> 
> route{
> 
>         # initial sanity checks -- messages with
>         # max_forwards==0, or excessively long requests
>         if (!mf_process_maxfwd_header("10")) {
>                 sl_send_reply("483","Too Many Hops");
>                 break;
>         };
>         if ( msg:len > max_len ) {
>                 sl_send_reply("513", "Message too big");
>                 break;
>         };
> 
>         # we record-route all messages -- to make sure that
>         # subsequent messages will go through our proxy; that's
>         # particularly good if upstream and downstream entities
>         # use different transport protocol
>         record_route();
>         # loose-route processing
>         if (loose_route()) {
>                 t_relay();
>                 break;
>         };
> 
>         # if the request is for other domain use UsrLoc
>         # (in case, it does not work, use the following command
>         # with proper names and addresses in it)
>         if (uri==myself) {
> 
>                 if (method=="REGISTER") {
> 
> # Uncomment this if you want to use digest authentication
> #                       if (!www_authorize("iptel.org", "subscriber")) {
> #                               www_challenge("iptel.org", "0");
> #                               break;
> #                       };
> 
>                         save("location");
>                         break;
>                 };
> 
>                 if (method=="SUBSCRIBE") {
>                         if (t_newtran()) {
>                                 handle_subscription("registrar");
>                         };
>                         break;
>                 };
> 
>                 # native SIP destinations are handled using our USRLOC DB
>                 if (!lookup("location")) {
>                         sl_send_reply("404", "Not Found");
>                         break;
>                 };
>         };
>         # forward to current uri now; use stateful forwarding; that
>         # works reliably even if we forward from TCP to UDP
>         if (!t_relay()) {
>                 sl_reply_error();
>         };
> 
> }

> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers