[Serusers] Re: voicemail config

[Sesha B]

I have observed that, if I run the voicemail config seperately with port
5060, the call is directly going to the voicemail. But if I change the port
to any other, it is not working!! I believe this might be the reason I am
not able to transfer to the voicemail when I run two instances of SER? Also,
in the sems.conf, the fifo file is /tmp/ser_fifo. Now, if I run 2 instances,
shouldnt we add two lines in the sems.conf?


-----Original Message-----
From: Nils Ohlmeier [mailto:nils at iptel.org]
Sent: Tuesday, December 02, 2003 3:55 PM
To: sesha at iic.com
Cc: serusers
Subject: Re: [Serusers] Re: voicemail config


On Tuesday 02 December 2003 21:56, Sesha B wrote:
> Oops.. I have the second fifo as /tmp/vm_ser_fifo. I was just messing
> around changing those while I was testing. So, it is not working with a
> different fifo too.

I dont know if it is messed too, but ser.cfg contains 'fork=no', which means
that this Ser instance will only listen on the first interface (normaly the
loopback interface).

  Nils

> -----Original Message-----
> From: Nils Ohlmeier [mailto:nils at iptel.org]
> Sent: Tuesday, December 02, 2003 3:44 PM
> To: sesha at iic.com
> Cc: serusers
> Subject: Re: [Serusers] Re: voicemail config
>
>
> I guess your second Ser is not starting, because then path and name of the
> fifo is the same for both Ser instances.
>
>   Nils
>
> On Tuesday 02 December 2003 21:27, Sesha B wrote:
> > Yeah, I'm listening on the loopback. I observed something interesting.
>
> When
>
> > I stop the first instance, the second instance (Which earlier used to go
>
> to
>
> > the voicemail directly), is also not working. It works only if I change
>
> the
>
> > port back to 5060 on the second instance of SER. I dont understand where
> > I am doing wrong. I'm attaching my ser.cfg and ser-vm.cfg. Please help.
>
> Thank
>
> > you.
> >
> > -----Original Message-----
> > From: Nils Ohlmeier [mailto:nils at iptel.org]
> > Sent: Tuesday, December 02, 2003 2:33 PM
> > To: sesha at iic.com; Jan Janak; Mario Kolberg
> > Cc: Klaus Darilion; serusers
> > Subject: Re: [Serusers] Re: voicemail config
> >
> > On Tuesday 02 December 2003 20:35, Sesha B wrote:
> > > I am running two instances of SER on the same machine. One is the
>
> regular
>
> > > config running on 5060 and the other is the voicemail config running
on
> > > 5090. I also have a different fifo file for both of the configs. I
dont
> >
> > see
> >
> > > any traffic on the port 5090 at all. I mean, the call is not forwarded
>
> to
>
> > > the voicemail. Please help. Thank you.
> >
> > Are you sure that you listen on the correct interface? Loopback
interface
> > in this case, e.g. 'ngrep -d lo port 5090'.
> >
> > Regards
> >   Nils
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers