[Serusers] Re: Residential Gateways

[Tor Setane]

Have you tried to use DO= ip-address of ser-server instead of ati.com?
I use authentication so I add AUTH-USERNAME=38140299 and 
AUTH-PASSWD=xxxxxxxx to the "create sip" command.
Here is one of my configs:

S SWITCH AGET=NORMAL
S SWITCH PORT=WAN IFLT=ON
S SWITCH PORT=LAN1 IFLT=ON
S SWITCH PORT=LAN2 IFLT=ON
S SWITCH PORT=LAN3 IFLT=ON
A VLAN=1 PORT=WAN FRAME=TAGGED
C VLAN=iptnett VID=5
A VLAN=5 PORT=VOIP
A VLAN=5 PORT=WAN FRAME=TAGGED
C VLAN=tvnett VID=10
A VLAN=10 PORT=LAN1,LAN3
A VLAN=10 PORT=WAN FRAME=TAGGED
SET IP INTERFACE=eth0 CONFIGURATION=DHCP
ENABLE TELNET
ENABLE NTP
SET NTP UTCOFFSET=1
ADD NTP SERVER=10.100.10.31 DEFAULT
SET PASSWORD=CIEEHOBB at HHILCHBNADNHA@NGL at B@HIF
ENABLE SIP
CREATE SIP PORT=0 PHNO=38140299 AUTH-USERNAME=38140299 
AUTH-PASSWD=xxxxxxxx DO=ipt-server1.ivisjon.no LS=ipt-server1.ivisjon.no 
PS=ipt-server1.ivisjon.no CAP=PCMU;PCMA TOS=5
SET PHONE PORT=0 DCALL=VOIP VAD=OFF

I have "ipt-server1.ivisjon.no" in my dns.

Tor.

andyv at sympatico.ca wrote:
> The RG's are 213
> 
> Here are the *.cfg files
> 
> #1
> SET IP INTERFACE=eth0 IPADDRESS=192.168.20.3 MASK=255.255.255.0 
> GATEWAY=192.168.20.1
> SET LOADER SERVER=192.168.20.10
> ENABLE SIP
> CREATE SIP PORT=0 
> PHNO=1001 DO=ati.com LS=192.168.20.4 PS=192.168.20.4 CAP=PCMU;PCMA;G723 TOS=0
> SET 
> PHONE PORT=0 DCALL=VOIP
> 
> #2
> SET IP INTERFACE=eth0 IPADDRESS=192.168.20.2 MASK=255.255.255.0 
> GATEWAY=192.168.20.1
> SET LOADER SERVER=192.168.20.4
> SET DOMAIN=ati.com
> ENABLE 
> SIP
> CREATE SIP PORT=0 PHNO=1000 DO=ati.com LS=192.168.20.4 PS=192.168.20.4 
> CAP=PCMU;PCMA;G723 TOS=0
> ENABLE TELNET
> SET PHONE PORT=0 DCALL=VOIP
> SET 
> PHONE PORT=1 DCALL=VOIP
> 
> 
> 
>>From: Tor Setane <tor.setane at ella.no>
>>Date: Mon, 01 Dec 2003 13:19:00 +0100
>>To: serusers at lists.iptel.org
>>Subject: [Serusers] Re: Residential Gateways
>>
>>What kind of gateways are you using? 213 or 613?
>>I'm using both without any problems. Please post your rg config..
>>
>>Tor.
>>
>>
>>>Date: Sun, 30 Nov 2003 19:59:37 -0500
>>>From: "Andy Vander Woude" <andyv at sympatico.ca>
>>>Subject: [Serusers] Residential Gateways
>>>To: <serusers at lists.iptel.org>
>>>Message-ID: <000001c3b7a6$68560d70$8adaacce at generator>
>>>Content-Type: text/plain; charset="us-ascii"
>>>
>>>
>>>Running Redhat V9 and have installed the SIP Express Router (ser)
>>>packages. Have two Allied Telesyn Residential Gateways (192.168.20.2 and
>>>192.168.20.3) and laptop (192.168.20.4) running ser connecting to a
>>>managed switch IP address (192.168.20.1 (gateway))
>>>The RG's are configured to access the Proxy server, & Domain server at
>>>192.168.20.4 and the Gateway as 192.168.20.1 The Domain is called
>>>ati.com.
>>>
>>>When connected all together I get a dial tone on the phones, however
>>>when I dial the # configured on the RG's I do not get a ring and they do
>>>not register with the ser server. When I type in the "ser start" command
>>>I see the alias entries as "127.0.0.1 localhost localdomain localhost"
>>>and "192.168.20.4 localhost.ati.com localhost"
>>>
>>>The entries in the ser.cfg relating to the localdomain have been changed
>>>to ati.com
>>>I have added the 192.168.20.4 to the hosts.cfg relating to the ati.com
>>>domain.
>>>
>>>Any idea as to why this configuration is not working. This is a lab
>>>situation with no outside connections.
>>>Thank you.
>>> 
>>>
>>
>>
>>---
>>[This E-mail was scanned for viruses by Declude Virus]
>>
>>_______________________________________________
>>Serusers mailing list
>>serusers at lists.iptel.org
>>http://lists.iptel.org/mailman/listinfo/serusers
>>
> 
> 
> ---
> [This E-mail was scanned for viruses by Declude Virus]
> 
> 
> 

---
[This E-mail was scanned for viruses by Declude Virus]