[Serusers] radius error
Daniel-Constantin Mierla
Daniel-Constantin.Mierla at fokus.fraunhofer.de
Fri Aug 8 11:39:20 CEST 2003
hello,
try to put in radiusd.conf in authenticate section:
Auth-Type DIGEST {
digest
}
instead of "digest" if you didn't try it already.
Daniel
Madan wrote:
> Hi Daniel
> Yes- I have configured freeradius to use rlm_digest and as per your
> advice i did nt load the auth_db module and also auth module was
> placed before auth_radius
>
> Yes- my raddb/users file contains Auth-Type for Digest
>
> test Auth-Type := Digest, User-Password = "test"
> Reply-Message = "Hello, test with digest"
>
>
> but this does nt seems to help me
>
> regards,
> Madan
>
> I forgot to tell you -- for each user you want to authenticate with
> digest the Auth-Type must be set to DIGEST (in users database of
> radius server).
>
> Daniel
>
> Daniel-Constantin Mierla wrote:
>
>> Hello,
>> have you set up FreeRADIUS to load digest authentication module
>> (rlm_digest)? You should have uncommented some lines in radiusd.conf
>> (see comments in that file).
>>
>> If you use RADIUS authentication module the auth_db may be useless
>> and is better to load auth module prior to auth_radius.
>>
>> Daniel
>>
>> Madan wrote:
>>
>>> hi
>>> i have installed ser with acc/mysql/radius module
>>> while registering a user 'm getting the following error message
>>>
>>> can somebody please point me as to what is wrong and where
>>>
>>> rad_recv: Access-Request packet from host myhost:33532, id=69,
>>> length=294
>>> Thread 3 assigned request 2
>>> Waking up in 2 seconds...
>>> Thread 3 handling request 2, (1 handled so far)
>>> User-Name = "sip:test at myhost"
>>> Digest-Attributes = "\n\034sip:test at myhost"
>>> Digest-Attributes = "\001\023myhost"
>>> Digest-Attributes =
>>> "\002*3f338410ec3d4e634e2883b85928416ef3c364e5"
>>> Digest-Attributes = "\004\027sip:myhost"
>>> Digest-Attributes = "\003\nREGISTER"
>>> Digest-Attributes = "\005\006auth"
>>> Digest-Attributes = "\t\n00000001"
>>> Digest-Attributes = "\010"34555301336645129540719731434531"
>>> Digest-Response = "acdd6400b4c16da2a04f85334d871415"
>>> Service-Type = IAPP-Register
>>> SIP-URI-User = "test"
>>> NAS-IP-Address = 127.0.0.1
>>> NAS-Port = 5060
>>> auth: No authenticate method (Auth-Type) configuration found for the
>>> request: Rejecting the user
>>> auth: Failed to validate the user.
>>> Delaying request 2 for 1 seconds
>>> Finished request 2
>>>
>>> FYI-
>>> OS- RH 7.2
>>> SER- latest from cvs with acc/mysql and radius
>>> RADIUS- freeradius
>>> ------------------------------------ser.cfg---------------------------------
>>>
>>> #
>>> # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
>>> #
>>> # simple quick-start config script
>>> #
>>>
>>> # ----------- global configuration parameters ------------------------
>>>
>>> debug=3 # debug level (cmd line: -dddddddddd)
>>> fork=no
>>> log_stderror=yes # (cmd line: -E)
>>>
>>> /* Uncomment these lines to enter debugging mode
>>> debug=7
>>> fork=no
>>> log_stderror=yes
>>> */
>>>
>>> check_via=no # (cmd. line: -v)
>>> dns=no # (cmd. line: -r)
>>> rev_dns=no # (cmd. line: -R)
>>> port=5060
>>> children=4
>>> fifo="/tmp/ser_fifo"
>>> mhomed=yes
>>> listen=myhost
>>> # ------------------ module loading ----------------------------------
>>>
>>> # Uncomment this if you want to use SQL database
>>>
>>> loadmodule "/usr/local/lib/ser/modules/mysql.so"
>>> loadmodule "/usr/local/lib/ser/modules/sl.so"
>>> loadmodule "/usr/local/lib/ser/modules/tm.so"
>>> loadmodule "/usr/local/lib/ser/modules/rr.so"
>>> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>>> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
>>> loadmodule "/usr/local/lib/ser/modules/registrar.so"
>>> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
>>> loadmodule "/usr/local/lib/ser/modules/uri.so"
>>> loadmodule "/usr/local/lib/ser/modules/auth.so"
>>> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>>> loadmodule "/usr/local/lib/ser/modules/acc.so"
>>>
>>> modparam("usrloc", "db_mode", 1)
>>> modparam("auth_radius",
>>> "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
>>>
>>> # -- rr params --
>>> # add value to ;lr param to make some broken UAs happy
>>> modparam("rr", "enable_full_lr", 1)
>>> modparam("acc", "log_level", 1)
>>> modparam("acc", "radius_flag", 1)
>>> # ------------------------- request routing logic -------------------
>>>
>>> # main routing logic
>>> alias=myhost
>>> route{
>>>
>>> # initial sanity checks -- messages with
>>> # max_forwards==0, or excessively long requests
>>>
>>> if (!mf_process_maxfwd_header("10")) {
>>> sl_send_reply("483","Too Many Hops");
>>> break;
>>> };
>>> if (len_gt( max_len )) {
>>> sl_send_reply("513", "Message too big");
>>> break;
>>> };
>>>
>>> # we record-route all messages -- to make sure that
>>> # subsequent messages will go through our proxy; that's
>>> # particularly good if upstream and downstream entities
>>> # use different transport protocol
>>>
>>>
>>> record_route();
>>> # if (loose_route()) {
>>> # t_relay();
>>> # break;
>>> # };
>>> #
>>> # if the request is for other domain use UsrLoc
>>> # (in case, it does not work, use the following command
>>> # with proper names and addresses in it)
>>> if (uri=~"myhost") {
>>>
>>> if (method=="REGISTER") {
>>> log(1, "REGISTER: Authenticating user\n");
>>>
>>> if (!radius_www_authorize("")) {
>>> log(1, "REGISTER: challenging user\n");
>>> www_challenge("", "1");
>>> break;
>>> };
>>> save("location");
>>> break;
>>> };
>>>
>>>
>>>
>>> if (method=="INVITE") {
>>>
>>> log(1, "INVITE\n");
>>> setflag(1); /* set for accounting (the same value as in
>>> log_flag!) */
>>> };
>>>
>>> if (method=="MESSAGE") {
>>> log(1, "MESSAGE\n");
>>> setflag(1); /* set for accounting (the same value as in
>>> log_flag!) */
>>> };
>>>
>>> if (method=="BYE" || method=="CANCEL") {
>>> log (1, "BYE or CANCEL\n");
>>> setflag(1);
>>>
>>>
>>> };
>>>
>>> # native SIP destinations are handled using our
>>> USRLOC DB
>>> if (!lookup("location")) {
>>> sl_send_reply("404", "Not Found");
>>> break;
>>> };
>>> #};
>>> # forward to current uri now; use stateful forwarding; that
>>> # works reliably even if we forward from TCP to UDP
>>> if (!t_relay()) {
>>> sl_reply_error();
>>> };
>>>
>>> };
>>> }
>>> -------------------------------------------end----------------------------------------------------------
>>>
>>>
>>> i dunno what is wrong here..if you need any other config files to
>>> help me out please let me know
>>> regards,
>>> Madan
>>>
>>> _______________________________________________
>>> Serusers mailing list
>>> serusers at lists.iptel.org
>>> http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>
>>
>> _______________________________________________
>> Serusers mailing list
>> serusers at lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
>>
>
>
>
> .
>
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
More information about the sr-users
mailing list