[Serusers] radius error
Daniel-Constantin Mierla
Daniel-Constantin.Mierla at fokus.fraunhofer.de
Fri Aug 8 10:58:32 CEST 2003
Hello,
have you set up FreeRADIUS to load digest authentication module
(rlm_digest)? You should have uncommented some lines in radiusd.conf
(see comments in that file).
If you use RADIUS authentication module the auth_db may be useless and
is better to load auth module prior to auth_radius.
Daniel
Madan wrote:
> hi
> i have installed ser with acc/mysql/radius module
> while registering a user 'm getting the following error message
>
> can somebody please point me as to what is wrong and where
>
> rad_recv: Access-Request packet from host myhost:33532, id=69, length=294
> Thread 3 assigned request 2
> Waking up in 2 seconds...
> Thread 3 handling request 2, (1 handled so far)
> User-Name = "sip:test at myhost"
> Digest-Attributes = "\n\034sip:test at myhost"
> Digest-Attributes = "\001\023myhost"
> Digest-Attributes =
> "\002*3f338410ec3d4e634e2883b85928416ef3c364e5"
> Digest-Attributes = "\004\027sip:myhost"
> Digest-Attributes = "\003\nREGISTER"
> Digest-Attributes = "\005\006auth"
> Digest-Attributes = "\t\n00000001"
> Digest-Attributes = "\010"34555301336645129540719731434531"
> Digest-Response = "acdd6400b4c16da2a04f85334d871415"
> Service-Type = IAPP-Register
> SIP-URI-User = "test"
> NAS-IP-Address = 127.0.0.1
> NAS-Port = 5060
> auth: No authenticate method (Auth-Type) configuration found for the
> request: Rejecting the user
> auth: Failed to validate the user.
> Delaying request 2 for 1 seconds
> Finished request 2
>
> FYI-
> OS- RH 7.2
> SER- latest from cvs with acc/mysql and radius
> RADIUS- freeradius
> ------------------------------------ser.cfg---------------------------------
>
> #
> # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> debug=3 # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=yes # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> mhomed=yes
> listen=myhost
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
>
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> loadmodule "/usr/local/lib/ser/modules/uri.so"
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
>
> modparam("usrloc", "db_mode", 1)
> modparam("auth_radius",
> "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> modparam("acc", "log_level", 1)
> modparam("acc", "radius_flag", 1)
> # ------------------------- request routing logic -------------------
>
> # main routing logic
> alias=myhost
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
>
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if (len_gt( max_len )) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
>
>
> record_route();
> # if (loose_route()) {
> # t_relay();
> # break;
> # };
> #
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri=~"myhost") {
>
> if (method=="REGISTER") {
> log(1, "REGISTER: Authenticating user\n");
>
> if (!radius_www_authorize("")) {
> log(1, "REGISTER: challenging user\n");
> www_challenge("", "1");
> break;
> };
> save("location");
> break;
> };
>
>
>
> if (method=="INVITE") {
>
> log(1, "INVITE\n");
> setflag(1); /* set for accounting (the same value as in
> log_flag!) */
> };
>
> if (method=="MESSAGE") {
> log(1, "MESSAGE\n");
> setflag(1); /* set for accounting (the same value as in
> log_flag!) */
> };
>
> if (method=="BYE" || method=="CANCEL") {
> log (1, "BYE or CANCEL\n");
> setflag(1);
>
>
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> #};
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
> };
> }
> -------------------------------------------end----------------------------------------------------------
>
>
> i dunno what is wrong here..if you need any other config files to help
> me out please let me know
> regards,
> Madan
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
More information about the sr-users
mailing list