[Serusers] Relaying to PSTN

Klaus Darilion darilion at ict.tuwien.ac.at
Mon Aug 4 12:55:49 CEST 2003


try this:
http://www.iptel.org/ser/doc/prerelease/x1026.html#AEN1032

> -----Original Message-----
> From: Dave Cotton [mailto:dcotton at linuxautrement.com] 
> Sent: Monday, August 04, 2003 12:52 PM
> To: Serusers List
> Subject: Re: [Serusers] Relaying to PSTN
> 
> 
> On Mon, 2003-08-04 at 12:29, Daniel-Constantin Mierla wrote:
> > Hello,
> > check if you have tm and print modules loaded (if you use 
> the same piece 
> > of config as below). Otherwise, send us line 124 from your 
> config file.
> > 
> > Daniel
> > 
> Effectively that was my line 124 
> > >t_relay_to( "192.168.0.2", "5060")
> 
> But since I mailed the list I've found a reference to 
> t_relay_to_udp, if
> I use that I no longer get this error, and ser starts with 24 
> processes
> accompanied by 48 mysql processes, having never seen ser working
> correctly so I have no idea if this is supposed to happen. 
> 
> Now I get good old 483 too many hops.
> 
> -- 
> Dave Cotton <dcotton at linuxautrement.com>
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
> 
> 




More information about the sr-users mailing list