[Serusers] cisco 2600 as sip-pstn gateway

[Dan Austin]

The 'just a BRI' is the tricky part.  You should need a
NM-HDV (I think that's the part number), with a 2 port
BRI VWIC.

Dan

-----Original Message-----
From: Greg Fausak [mailto:greg at august.net] 
Sent: Wednesday, April 23, 2003 9:51 AM
To: 'Yang Xiang'; serusers at lists.iptel.org
Subject: RE: [Serusers] cisco 2600 as sip-pstn gateway


Yes, it works with a BRI interface.
I have experimented with a 3620 like that, the
Same cards go in the 26xx series I believe.

---greg


> -----Original Message-----
> From: serusers-admin at lists.iptel.org
> [mailto:serusers-admin at lists.iptel.org] On Behalf Of Yang Xiang
> Sent: Wednesday, April 23, 2003 11:32 AM
> To: serusers at lists.iptel.org
> Subject: [Serusers] cisco 2600 as sip-pstn gateway
> 
> 
> Hi all,
> 
> I want to use a cisco 2600 as sip2pstn gateway. In csico
> dokumentations and
> in postings of other people it seems that the cisco 2600 
> works with a PRI
> ISDN interface. Does anybody konw if it also works with BRI 
> interface? I
> don't find a way to define "voice-port" on the router just with BRI
> interface. Has anybody here successfully tested this?
> 
> Many thanks
> 
> Yang
> 
> 
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
> 

_______________________________________________
Serusers mailing list
serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers