[Serusers] Startup

[Dinesh]

Below is my cfg file.

Thanks, Dinesh

#
# $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

debug=3          # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no	# (cmd line: -E)
check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "//usr/lib/ser/modules/mysql.so"

loadmodule "//usr/lib/ser/modules/sl.so"
loadmodule "//usr/lib/ser/modules/tm.so"
loadmodule "//usr/lib/ser/modules/rr.so"
loadmodule "//usr/lib/ser/modules/maxfwd.so"
loadmodule "//usr/lib/ser/modules/usrloc.so"
loadmodule "//usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "//usr/lib/ser/modules/auth.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
#modparam("auth", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this
config), 
# uncomment also the following parameter)
#
#modparam("auth", "password_column", "password")

# -------------------------  request routing logic -------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwars==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if (len_gt( max_len )) {
		sl_send_reply("513", "Message too big");
		break;
	};

	# Do strict routing if pre-loaded route headers present
	rewriteFromRoute();

	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following command
	# with proper names and addresses in it)
	if (uri=~"dmglobal.com") {

		if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
#			if (!www_authorize("dmglobal.com",
"subscriber")) {
#				www_challenge("dmglobal.com", "0");
#				break;
#			};

			save("location");
			break;
		};

		# native SIP destinations are handled using our USRLOC
DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			break;
		};
	};
	# forward to current uri now
	if (!t_relay()) {
		sl_reply_error();
	};

}


 
 
Dinesh Mahbubani
The International Marketing Exchange Ltd.
Email: dinesh at imelhk.com <mailto:dinesh at imelhk.com> 
Tel: (852) 2541-2617
Fax (852) 2543-4537


-----Original Message-----
From: 'Jan Janak' [mailto:jan at iptel.org] 
Sent: Wednesday, April 23, 2003 7:40 PM
To: Dinesh
Cc: serusers at lists.iptel.org
Subject: Re: [Serusers] Startup


On 23-04 19:35, Dinesh wrote:
> 
> Yes  I do have "fork-yes"
> 
> In cfg
> 
> Should I change it to no?

  No. Send us your start-up script. And please reply to
  serusers at lists.iptel.org, not directly to me.

    Jan.