[sr-dev] issue using evapi module with evapi_relay

[Henning Westerholt]

Hi David,

have not looked into the specific problems in detail, but I would suggest to at least upgrade to the latest 5.3.7 or 5.4.2 release. There might be several bugfixes included that helps here for these problems.

If the problems persist after that, I would suggest to create individual issues on our tracker about that.

Cheers,

Henning

--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>

From: sr-dev <sr-dev-bounces at lists.kamailio.org> On Behalf Of David Escartin
Sent: Monday, November 30, 2020 11:19 AM
To: Kamailio (SER) - Development Mailing List <sr-dev at lists.kamailio.org>
Subject: [sr-dev] issue using evapi module with evapi_relay

Dear all

we have been testing this module with the following setup
kamailio 5.3.2
evapi params
modparam("evapi", "workers", 4)
modparam("evapi", "netstring_format", 0)
modparam("evapi", "bind_addr", "127.0.0.1:8448<http://127.0.0.1:8448/>")
modparam("evapi", "max_clients", 32)

then in the configuration we do evapi_relay of avp including a json data (which can be quite long), like this
{"key" : "aarp2q0tcpqhs0cpucuhukjs2ah2j00q at 10.18.5.64<mailto:aarp2q0tcpqhs0cpucuhukjs2ah2j00q at 10.18.5.64>" , "msg" : {"rg_in":"701","ani_init":{"ani_source":"pai", ....... }}}

We have an application listening on the tcp socket and writing those messages to a kafka cluster, and this works ok, and in the previous manual tests we have done no issue was found.
But when making some load tests, and passing some live traffic we see some issues

seems like some times, when there are messages to be sent to the tcp socket at the same time, they are sent in the same message, when normally each data sent using evapi_relay is sent in 1 message
We do sometimes see something like this on the application consuming from the tcp socket
2020-11-25 15:20:01.744 UTC [error] <0.706.0>@evapi_kafka_listener:handle_info:167 body "{\"key\" : \"6142651aa63616c6c04a783cd at 72.21.24.130<mailto:6142651aa63616c6c04a783cd at 72.21.24.130>\" , \"msg\" : {\"rg_in\":\"677\",\"ani_init\":{\"ani_source\":\"fro\",.......}}}{\"key\" : \"isbc7caT4001915251VabcGhEfHdNiF0i at 172.16.120.1<mailto:isbc7caT4001915251VabcGhEfHdNiF0i at 172.16.120.1>\" , \"msg\" : {\"rg_in\":\"22\",\"ani_init\":{\"ani_source\":\"pai\", ....... ,\"translate" not valid json; error = {691,invalid_trailing_data}
2020-11-25 15:20:01.745 UTC [error] <0.706.0>@evapi_kafka_listener:handle_info:167 body "dPartition\":\"-1\",......}}}" not valid json; error = {1,invalid_json}

and we do see that the application cannot parse the json message fine, because we have like 2 json objects together ......{\"ani_source\":\"fro\",.......}}}{\"key\" : \"isbc7caT4001915251Vabc............
This happens with 2 different UDP receivers processing messages and calling evapi_relay at the same time. But i don't think this happens all the time. Seems like some issue when several processes try to use evapi workers at the same time.
We tried to increase evapi workers and it's the same

We also saw another issue I think. Seems when the avp sent to evapi socket is bigger than ~1680 char, the json is also truncated, and also happens when we use the socket in Lo interface which has an MTU of 65535.

Could you please take a look to see if there is any problem or limitation, or if we are using something wrong?

thanks and best regards
david

--
[Logo]

David Escartín Almudévar
VoIP/Switch Engineer
descartin at sonoc.io<mailto:descartin at sonoc.io>

SONOC
C/ Josefa Amar y Borbón, 10, 4ª · 50001 Zaragoza, España
Tlf: +34 917019888 · www.sonoc.io<http://www.sonoc.io>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-dev/attachments/20201201/3af7c0c1/attachment-0001.htm>