[sr-dev] git:master:d0831cf3: modules: readme files regenerated - dispatcher ... [skip ci]

Kamailio Dev kamailio.dev at kamailio.org
Thu Jan 10 22:01:55 CET 2019

Module: kamailio
Branch: master
Commit: d0831cf336f6f4a2cad87698f60ecd151dcd28b9
URL: https://github.com/kamailio/kamailio/commit/d0831cf336f6f4a2cad87698f60ecd151dcd28b9

Author: Kamailio Dev <kamailio.dev at kamailio.org>
Committer: Kamailio Dev <kamailio.dev at kamailio.org>
Date: 2019-01-10T22:01:38+01:00

modules: readme files regenerated - dispatcher ... [skip ci]


Modified: src/modules/dispatcher/README


Diff:  https://github.com/kamailio/kamailio/commit/d0831cf336f6f4a2cad87698f60ecd151dcd28b9.diff
Patch: https://github.com/kamailio/kamailio/commit/d0831cf336f6f4a2cad87698f60ecd151dcd28b9.patch


diff --git a/src/modules/dispatcher/README b/src/modules/dispatcher/README
index 53a464d8ff..55cc631c1f 100644
--- a/src/modules/dispatcher/README
+++ b/src/modules/dispatcher/README
@@ -697,10 +697,15 @@ Note
    Controls what gateways are tested to see if they are reachable.
      * Value 0: If set to 0, only the gateways with state PROBING are
        tested. After a gateway is probed, the PROBING state is cleared in
-       this mode.
+       this mode. This means that no probing will be executed at all only
+       if flag in config file is set to 8/PROBING (please check
+       destination list file syntaxis for more details), it will probe
+       only one time at startup or after dispatcher reload.
      * Value 1: If set to 1, all gateways are tested. If set to 1 and
        there is a failure of keepalive to an active gateway, then it is
-       set to TRYING state.
+       set to TRYING state. This means that probing will be executed all
+       the time, but you can skip some servers with flag 4 in destination
+       list file, for example.
      * Value 2: if set to 2, only gateways in inactive state with probing
        mode set are tested.
      * Value 3: If set to 3, any gateway with state PROBING is continually
@@ -1388,6 +1393,21 @@ kamcmd dispatcher.set_state ip 3 all
                 kamcmd dispatcher.list
+ ...
+DEST: {
+        URI: sip:
+        FLAGS: AP
+        PRIORITY: 12
+ ...
+   FLAGS consist out of 2 letters. First letter describe status of
+   destination: A-active, I – inactive, T – trying, D – disabled.
+   Second letter might be P or X. P is for probing, so AP means
+   destination is active and it is tested by SIP options continuously. X
+   means that there are no probing or sip pinging. So AX means that
+   destination is assumed as active and it is not tested by SIP options.
+   DX respectively is disabled destination what is not tested and etc.
 5.3.  dispatcher.reload

More information about the sr-dev mailing list