[sr-dev] [kamailio/kamailio] pv_evalx result in destination pv seems wrong (#1551)

[Victor Seva]

Try this:
```
#!KAMAILIO
#
####### Global Parameters #########

### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
log_stderror=yes

memdbg=5
memlog=5

log_facility=LOG_LOCAL0
log_stderror=yes
fork=no

/* uncomment the next line to disable TCP (default on) */
disable_tcp=yes

/* uncomment the next line to disable the auto discovery of local aliases
 * based on reverse DNS on IPs (default on) */
auto_aliases=no

/* add local domain aliases */
#alias="sip.mydomain.com"

/* uncomment and configure the following line if you want Kamailio to
 * bind on a specific interface/port/proto (default bind on all available) */
#listen=udp:10.0.0.10:5060

/* port to listen to
 * - can be specified more than once if needed to listen on many ports */
port=5060

# life time of TCP connection when there is no traffic
# - a bit higher than registration expires to cope with UA behind NAT
tcp_connection_lifetime=3605

####### Modules Section ########

# set paths to location of modules (to sources or installation folders)
mpath="modules"

loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "dialog.so"
loadmodule "xlog.so"
loadmodule "debugger.so"

# ----------------- setting module-specific parameters ---------------

modparam("dialog", "dlg_flag", 9)

# ----- debugger params -----
modparam("debugger", "mod_level_mode", 1)
modparam("debugger", "mod_hash_size", 4)
modparam("debugger", "mod_level", "core=3")
modparam("debugger", "mod_level", "xlog=3")

####### Routing Logic ########


# Main SIP request routing logic
# - processing of any incoming SIP request starts with this route
# - note: this is the same as route { ... }
request_route {
	$dlg_var(cgrCategory) = "internal";
	$dlg_var(cgrReqType) = "cgrReqType";
	$dlg_var(tenant) = "tenant";
	$dlg_var(cgrAccount) = "cgrAccount";
	$dlg_var(cgrDestination) = "cgrDestination";
	$dlg_var(profile) = "profile";
	$dlg_var(source_user) = "source_user";
	$dlg_var(account_code) = "account_code";
	$dlg_var(billing_cli) = "billing_cli";
	$dlg_var(start_ts) = "start_ts";
	$dlg_var(reseller_id) = "reseller_id";

	xinfo("Send the call to CGRates ci='$ci'");
	$var(tmp) = '"event":"CGR_AUTH_REQUEST",
        "cgr_category":"$dlg_var(cgrCategory)",
        "cgr_reqtype":"$dlg_var(cgrReqType)",
        "cgr_tenant":"$dlg_var(tenant)",
        "cgr_account":"$dlg_var(cgrAccount)",
        "cgr_destination":"$dlg_var(cgrDestination)",
        "direction":"$dlg_var(profile)",
        "source_user":"$dlg_var(source_user)",
        "recording_url":"",
        "account_code":"$dlg_var(account_code)",
        "billing_cli":"$dlg_var(billing_cli)",
        "cgr_setuptime":"$dlg_var(start_ts)",
        "reseller_id":"$dlg_var(reseller_id)"';
	pv_evalx("$var(msg)", "$var(tmp)");
	xinfo("$$var(tmp):'$var(tmp)'\n");
	xinfo("$$var(msg):'$var(msg)'\n");
	xinfo("++++\n");
}
```

```
|9(15) INFO: <script>: Send the call to CGRates ci='2019802638 at 172.19.0.3' 9(15) DEBUG: <core> [core/pvapi.c:1056]: pv_parse_format(): parsing ["event":"CGR_AUTH_REQUEST",
| "cgr_category":"$dlg_var(cgrCategory)",
| "cgr_reqtype":"$dlg_var(cgrReqType)",
| "cgr_tenant":"$dlg_var(tenant)",
| "cgr_account":"$dlg_var(cgrAccount)",
| "cgr_destination":"$dlg_var(cgrDestination)",
| "direction":"$dlg_var(profile)",
| "source_user":"$dlg_var(source_user)",
| "recording_url":"",
| "account_code":"$dlg_var(account_code)",
| "billing_cli":"$dlg_var(billing_cli)",
| "cgr_setuptime":"$dlg_var(start_ts)",
| "reseller_id":"$dlg_var(reseller_id)"]
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(cgrCategory)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(cgrReqType)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(tenant)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(cgrAccount)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(cgrDestination)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(profile)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(source_user)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(account_code)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(billing_cli)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(start_ts)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:320]: pv_cache_lookup(): pvar [$dlg_var(reseller_id)] found in cache
|9(15) DEBUG: <core> [core/pvapi.c:1103]: pv_parse_format(): format parsed OK: [12] items
|9(15) INFO: <script>: $var(tmp):'"event":"CGR_AUTH_REQUEST",
| "cgr_category":"$dlg_var(cgrCategory)",
| "cgr_reqtype":"$dlg_var(cgrReqType)",
| "cgr_tenant":"$dlg_var(tenant)",
| "cgr_account":"$dlg_var(cgrAccount)",
| "cgr_destination":"$dlg_var(cgrDestination)",
| "direction":"$dlg_var(profile)",
| "source_user":"$dlg_var(source_user)",
| "recording_url":"",
| "account_code":"$dlg_var(account_code)",
| "billing_cli":"$dlg_var(billing_cli)",
| "cgr_setuptime":"$dlg_var(start_ts)",
| "reseller_id":"$dlg_var(reseller_id)"'
|9(15) INFO: <script>: $var(msg):'start_ts 9(15) INFO: <script>: ++++
|9(15) DEBUG: <core> [core/receive.c:275]: receive_msg(): request-route executed in: 13678 usec

```

-- 
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/1551#issuecomment-393811584
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-dev/attachments/20180601/0d3eb7d1/attachment-0001.html>