[sr-dev] git:master: nathelper: improved add_contact_alias() description

Juha Heinanen jh at tutpro.com
Tue Nov 18 03:35:21 CET 2014 

Module: sip-router
Branch: master
Commit: c04f9554df58b1323a46f6e40337fa34b34f1cc9
URL:    http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=c04f9554df58b1323a46f6e40337fa34b34f1cc9

Author: Juha Heinanen <jh at tutpro.com>
Committer: Juha Heinanen <jh at tutpro.com>
Date:   Tue Nov 18 04:32:35 2014 +0200

nathelper: improved add_contact_alias() description
- thanks to Dan Christian Bogos for pointing out the deficiency

---

 modules/nathelper/README                  |   69 +++++++++++++++--------------
 modules/nathelper/doc/nathelper_admin.xml |    9 +++-
 2 files changed, 41 insertions(+), 37 deletions(-)

diff --git a/modules/nathelper/README b/modules/nathelper/README
index bb56670..a526fe7 100644
--- a/modules/nathelper/README
+++ b/modules/nathelper/README
@@ -24,13 +24,13 @@ Edited by
 
 Ovidiu Sas
 
-   Copyright © 2003-2008 Sippy Software, Inc.
+   Copyright (c) 2003-2008 Sippy Software, Inc.
 
-   Copyright © 2005 Voice Sistem SRL
+   Copyright (c) 2005 Voice Sistem SRL
 
-   Copyright © 2009 TuTPro Inc.
+   Copyright (c) 2009 TuTPro Inc.
 
-   Copyright © 2010 VoIPEmbedded Inc.
+   Copyright (c) 2010 VoIPEmbedded Inc.
      __________________________________________________________________
 
    Table of Contents
@@ -438,7 +438,7 @@ modparam("nathelper", "udpping_from_path", 1)
    5.8. handle_ruri_alias()
    5.9. set_contact_alias()
 
-5.1. fix_nated_contact()
+5.1.  fix_nated_contact()
 
    Rewrites the "Contact" header to contain the request's source
    address:port.
@@ -451,7 +451,7 @@ modparam("nathelper", "udpping_from_path", 1)
 if (search("User-Agent: Cisco ATA.*") {fix_nated_contact();};
 ...
 
-5.2. fix_nated_sdp(flags [, ip_address])
+5.2.  fix_nated_sdp(flags [, ip_address])
 
    Alters the SDP information in orer to facilitate NAT traversal. What
    changes to be performed may be controled via the "flags" parameter.
@@ -481,7 +481,7 @@ if (search("User-Agent: Cisco ATA.*") {fix_nated_contact();};
 if (search("User-Agent: Cisco ATA.*") {fix_nated_sdp("3");};
 ...
 
-5.3. add_rcv_param([flag]),
+5.3.  add_rcv_param([flag]),
 
    Add a received parameter to the "Contact" header fields or the Contact
    URI. The parameter will contain the URI created from the source IP,
@@ -505,7 +505,7 @@ add_rcv_param(); # add the parameter to the Contact header
 add_rcv_param("1"); # add the parameter to the Contact URI
 ...
 
-5.4. fix_nated_register()
+5.4.  fix_nated_register()
 
    The function creates a URI consisting of the source IP, port, and
    protocol and stores the URI in an Attribute-Value-Pair. The URI will be
@@ -523,7 +523,7 @@ add_rcv_param("1"); # add the parameter to the Contact URI
 fix_nated_register();
 ...
 
-5.5. nat_uac_test(flags)
+5.5.  nat_uac_test(flags)
 
    Tries to guess if client's request originated behind a nat. The
    parameter determines what heuristics is used.
@@ -552,18 +552,19 @@ fix_nated_register();
    This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE,
    FAILURE_ROUTE, BRANCH_ROUTE.
 
-5.6. is_rfc1918(ip_address)
+5.6.  is_rfc1918(ip_address)
 
    Determines if the address in the parameter is an rfc1918 or rfc6598
    address. The parameter allows pseudo-variables usage.
 
    This function can be used from ANY_ROUTE.
 
-5.7. add_contact_alias([ip_addr, port, proto])
+5.7.  add_contact_alias([ip_addr, port, proto])
 
    Adds an ";alias=ip~port~transport" parameter to the contact URI
    containing either received ip, port, and transport protocol or those
-   given as parameters.
+   given as parameters. If called without parameters, ";alias" parameter
+   is only added if received ip and port differ from those in contact URI.
 
    This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE,
    BRANCH_ROUTE, and LOCAL_ROUTE.
@@ -579,7 +580,7 @@ fix_nated_register();
     };
 ...
 
-5.8. handle_ruri_alias()
+5.8.  handle_ruri_alias()
 
    Checks if the Request URI has an "alias" parameter and if so, removes
    it and sets the "$du" based on its value. Note that this means that
@@ -614,7 +615,7 @@ fix_nated_register();
     };
 ...
 
-5.9. set_contact_alias()
+5.9.  set_contact_alias()
 
    Adds an ";alias=ip~port~transport" parameter to the contact URI
    containing the received ip, port, and transport protocol. The new
@@ -704,38 +705,38 @@ Chapter 2. Frequently Asked Questions
 
    2.1.
 
-   What happend with "rtpproxy_disable" parameter?
+       What happend with "rtpproxy_disable" parameter?
 
-   It was removed as it became obsolete - now "rtpproxy_sock" can take
-   empty value to disable the rtpproxy functionality.
+       It was removed as it became obsolete - now "rtpproxy_sock" can take
+       empty value to disable the rtpproxy functionality.
 
    2.2.
 
-   Where can I find more about Kamailio?
+       Where can I find more about Kamailio?
 
-   Take a look at http://www.kamailio.org/.
+       Take a look at http://www.kamailio.org/.
 
    2.3.
 
-   Where can I post a question about this module?
+       Where can I post a question about this module?
 
-   First at all check if your question was already answered on one of our
-   mailing lists:
-     * User Mailing List -
-       http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-     * Developer Mailing List -
-       http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
+       First at all check if your question was already answered on one of our
+       mailing lists:
+         * User Mailing List -
+           http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
+         * Developer Mailing List -
+           http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
 
-   E-mails regarding any stable Kamailio release should be sent to
-   <sr-users at lists.sip-router.org> and e-mails regarding development
-   versions should be sent to <sr-dev at lists.sip-router.org>.
+       E-mails regarding any stable Kamailio release should be sent to
+       <sr-users at lists.sip-router.org> and e-mails regarding development
+       versions should be sent to <sr-dev at lists.sip-router.org>.
 
-   If you want to keep the mail private, send it to
-   <sr-users at lists.sip-router.org>.
+       If you want to keep the mail private, send it to
+       <sr-users at lists.sip-router.org>.
 
    2.4.
 
-   How can I report a bug?
+       How can I report a bug?
 
-   Please follow the guidelines provided at:
-   http://sip-router.org/tracker.
+       Please follow the guidelines provided at:
+       http://sip-router.org/tracker.
diff --git a/modules/nathelper/doc/nathelper_admin.xml b/modules/nathelper/doc/nathelper_admin.xml
index 63839f6..7283704 100644
--- a/modules/nathelper/doc/nathelper_admin.xml
+++ b/modules/nathelper/doc/nathelper_admin.xml
@@ -642,9 +642,12 @@ fix_nated_register();
 		<function moreinfo="none">add_contact_alias([ip_addr, port, proto])</function>
 		</title>
 		<para>
-		Adds an <quote>;alias=ip~port~transport</quote> parameter to the contact URI
-		containing either received ip, port, and transport protocol
-		or those given as parameters.
+		Adds an <quote>;alias=ip~port~transport</quote> parameter to
+		the contact URI containing either received ip, port, and
+		transport protocol or those given as parameters.  If called
+		without parameters, <quote>;alias</quote> parameter is
+		only added if received ip and port differ from those in
+		contact URI.
 		</para>
 		<para>
 		This function can be used from

More information about the sr-dev mailing list