[sr-dev] Fwd: Create multiple profiles using dialog module

Carlos Ruiz Díaz carlos.ruizdiaz at gmail.com
Mon Jun 9 17:24:26 CEST 2014 

Yes, copy/paste error, sorry. I meant to say *!=$null.*

Thank you for noticing Daniel.
Carlos.




On Mon, Jun 9, 2014 at 10:13 AM, Daniel-Constantin Mierla <miconda at gmail.com
> wrote:

>  Hello,
>
>
> On 09/06/14 16:54, Carlos Ruiz Díaz wrote:
>
> Hi Rahul,
>
>  *if($var(client1)!="null") *should be *if($var(client1)!="$null")*
>
> even in the last IF, the double-quotes have to be removed around "$null"
> -- just compare with $null, because doublequotes there enforces a static
> string.
>
> Cheers,
> Daniel
>
>
>  *. *You are doing a string comparison with the string value "*null*".
>
>  Also make sure the dialog matching is correct: append these event routes
> to your config file:
>
>  *event_route[dialog:start] {*
> *        xlog("Dialog started");*
> *}*
>
>  *event_route[dialog:end] {*
> *        xlog("Dialog ended");*
> *}*
>
>  *event_route[dialog:failed] {*
> *        xlog("Dialog failed");*
> *}*
>
>  You should see a "dialog started" and "dialog ended" for every
> successful call.
>
>  Please do those modifications and see what happens.
>
>  Regards,
> Carlos
>
>
>
>
> On Mon, Jun 9, 2014 at 6:55 AM, Rahul MathuR <rahul.ultimate at gmail.com>
> wrote:
>
>>  Hello Carlos,
>>
>> Were you able to look at my configuration file ?
>>
>>
>> Thanks !
>>
>>
>> On Fri, Jun 6, 2014 at 5:04 AM, Carlos Ruiz Díaz <
>> carlos.ruizdiaz at gmail.com> wrote:
>>
>>> Hi Rahul,
>>>
>>>  sorry, I couldn't find time to do it. I will take a look tomorrow, or
>>> most possibly during the weekend.
>>>
>>>  Regards,
>>> Carlos
>>>
>>>
>>> On Thu, Jun 5, 2014 at 8:28 PM, Rahul MathuR <rahul.ultimate at gmail.com>
>>> wrote:
>>>
>>>> Hello Carlos,
>>>>
>>>>  Did you get a chance to look at the attached configuration file ?
>>>>
>>>>
>>>>  Warm Regds,
>>>> Rahul Mathur
>>>>
>>>>
>>>> On Thu, Jun 5, 2014 at 2:46 PM, Rahul MathuR <rahul.ultimate at gmail.com>
>>>> wrote:
>>>>
>>>>>  Hi Carlos,
>>>>>
>>>>> Please find attached the configuration file which I am using.
>>>>> Kindly refer route[CNXCC] where I have tried to put the channel
>>>>> limitation per SIP Server.
>>>>>
>>>>>
>>>>> Thanks !
>>>>>
>>>>>
>>>>> On Wed, Jun 4, 2014 at 3:07 PM, Carlos Ruiz Díaz <
>>>>> carlos.ruizdiaz at gmail.com> wrote:
>>>>>
>>>>>> Can you share your configuration file?
>>>>>>
>>>>>>
>>>>>> On Wed, Jun 4, 2014 at 1:03 AM, Rahul MathuR <
>>>>>> rahul.ultimate at gmail.com> wrote:
>>>>>>
>>>>>>>  HI Carlos,
>>>>>>>
>>>>>>> Thanks for reply.
>>>>>>>
>>>>>>> In my case the key is SIP Server IP. My kamailio Proxy is connected
>>>>>>> to many sip server IPs say 5. I want to limit maximum channels per sip
>>>>>>> server ip. So I set max channels per sip server ip as
>>>>>>> cnxcc_set_max_channels("$var(client1)", "$var(max_chan)"); and my
>>>>>>> $var(client1) = "10.97.116.36"; is one of 5 sip servers connected to
>>>>>>> Kamalio.
>>>>>>>
>>>>>>> Now I use your cnxcc_get_channel_count("$rd", "$var(count1)"))
>>>>>>> value(count1) to compare to the max_limit of the channels allowed for this
>>>>>>> sip server. Psuedo Variable $rd is coming correctly that is same as sips
>>>>>>> erver IP[$var(client1)].
>>>>>>> But the problem is that cnxcc_get_channel_count("$rd",
>>>>>>> "$var(count1)"))  is always setting the value 1 in $var(count1) variable
>>>>>>> even though there are more calls runnning than what was set to be max_chan
>>>>>>> (which was 100 in my case).
>>>>>>>
>>>>>>> Any pointers to achieve this matter ?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz Díaz <
>>>>>>> carlos.ruizdiaz at gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi Rahul,
>>>>>>>>
>>>>>>>>  I don't understand your example. In that case, you are always
>>>>>>>> using "10.97.116.36" as key, meaning that all calls will be
>>>>>>>> hanging from same root.
>>>>>>>>
>>>>>>>>  If you want to use the request-uri domain part, use $rd, not the
>>>>>>>> full $ru. This will of course lead to 1 call being reported always, since
>>>>>>>> request-URIs tend to be different from each other.
>>>>>>>>
>>>>>>>>  Regards,
>>>>>>>> Carlos
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <
>>>>>>>> rahul.ultimate at gmail.com> wrote:
>>>>>>>>
>>>>>>>>>  Hi Carlos,
>>>>>>>>>
>>>>>>>>> Sorry for coming late on this one.
>>>>>>>>>
>>>>>>>>> the ruri value in my example is '10.97.116.36'
>>>>>>>>> and i have tried to configure kamailio to only cater 100
>>>>>>>>> simultaneous calls on this SIP Server (10.97.116.36), after that it is to
>>>>>>>>> send 403.
>>>>>>>>>
>>>>>>>>> Below is the sample logic from kamailio.cfg
>>>>>>>>>
>>>>>>>>> ***********************************************************************************************************************
>>>>>>>>>   #Below lines to show an example of how I am maintaining the
>>>>>>>>> business for Concurrent Call Restriction
>>>>>>>>>   route[CNXCC]
>>>>>>>>>   {
>>>>>>>>>
>>>>>>>>>           $var(client1)           = "10.97.116.36";
>>>>>>>>>    $var(max_chan)   = 100;
>>>>>>>>>   #!ifdef CNXCC_CHANNEL
>>>>>>>>>           xlog("L_INFO", "Setting up channel based credit
>>>>>>>>> control");
>>>>>>>>>
>>>>>>>>>           $var(max_chan1) = 0;
>>>>>>>>>           $var(retcode)   =
>>>>>>>>> cnxcc_set_max_channels("$var(client1)",  "$var(max_chan)");
>>>>>>>>>
>>>>>>>>>           if ($var(retcode) == -1) {
>>>>>>>>>                   xlog("Error setting up credit control");
>>>>>>>>>                   return;
>>>>>>>>>           }
>>>>>>>>>
>>>>>>>>>           $var(count1)     = -1;
>>>>>>>>>
>>>>>>>>>           if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
>>>>>>>>>                   xlog("Error getting customer's channel count");
>>>>>>>>>           }
>>>>>>>>>            xlog("RAHUL : CNXCC ROUTE: $var(client1) has
>>>>>>>>> $var(count1) call(s)");
>>>>>>>>>           xlog("L_INFO", "CNXCC ROUTE: $var(client1) has
>>>>>>>>> $var(count1)  call(s)");
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>           if ($var(count1) == $var(max_chan1)) {
>>>>>>>>>                   xlog("Too many channels for customer");
>>>>>>>>>                   sl_send_reply(403, "Forbidden");
>>>>>>>>>
>>>>>>>>>                     exit;
>>>>>>>>>           }
>>>>>>>>>   #!endif
>>>>>>>>>
>>>>>>>>> ******************************************************************************************************************************************************
>>>>>>>>>
>>>>>>>>> Now the problem that I am facing is that with multiple UACs (all
>>>>>>>>> with same ruri - 10.97.116.36) dialing some pstn numbers, the value of
>>>>>>>>> "count1" remains 1 for all cases. Hence, my purpose is defeated because the
>>>>>>>>> restriction is not being laid and more than 'max_chan' no. of callers are
>>>>>>>>> able to make the call.
>>>>>>>>>
>>>>>>>>> Could you please help me achieve this goal.
>>>>>>>>>
>>>>>>>>> Thanks !
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <
>>>>>>>>> carlos.ruizdiaz at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> max_chan is equal to zero? You should put a positive value in
>>>>>>>>>> here in order to make sense the function call.
>>>>>>>>>>
>>>>>>>>>>  Also, you are using for one call the ID "x.y.z.a", and for the
>>>>>>>>>> other one $rd. Both should be the same for calls that suppose to be
>>>>>>>>>> organized in the same group.
>>>>>>>>>>
>>>>>>>>>>  Please take a look at the docs.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <
>>>>>>>>>> rahul.ultimate at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Further, from the logs it seems that cnxcc_set_max_channels is
>>>>>>>>>>> returning -1 and I have no idea why it is failing.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <
>>>>>>>>>>> rahul.ultimate at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hello Carlos,
>>>>>>>>>>>>
>>>>>>>>>>>>  Many thanks for your help.
>>>>>>>>>>>> I followed the steps you mentioned for CNXCC. But even after
>>>>>>>>>>>> making the max. calls to 0, I am still able to connect the call. Below is
>>>>>>>>>>>> the excerpt from kamailio.cfg
>>>>>>>>>>>>
>>>>>>>>>>>>  request_route {
>>>>>>>>>>>> setflag(DLG_FLAG);
>>>>>>>>>>>> # per request initial checks
>>>>>>>>>>>> route(REQINIT);
>>>>>>>>>>>> # NAT detection
>>>>>>>>>>>> route(NATDETECT);
>>>>>>>>>>>>  .
>>>>>>>>>>>> .
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>>>          if (is_method("INVITE")) {
>>>>>>>>>>>>                 route(CNXCC);
>>>>>>>>>>>>         }
>>>>>>>>>>>>  }
>>>>>>>>>>>>
>>>>>>>>>>>>   #Below lines added by Rahul for Concurrent Call Restriction
>>>>>>>>>>>> route[CNXCC]
>>>>>>>>>>>> {
>>>>>>>>>>>>
>>>>>>>>>>>>          $var(client1)           = "x.y.z.a";
>>>>>>>>>>>>
>>>>>>>>>>>>  #!ifdef CNXCC_CHANNEL
>>>>>>>>>>>>         xlog("L_INFO", "Setting up channel based credit
>>>>>>>>>>>> control");
>>>>>>>>>>>>
>>>>>>>>>>>>          $var(max_chan1) = 0;
>>>>>>>>>>>>         $var(retcode)   =
>>>>>>>>>>>> cnxcc_set_max_channels("$var(client1)", "$var(max_chan)");
>>>>>>>>>>>>
>>>>>>>>>>>>          if ($var(retcode) == -1) {
>>>>>>>>>>>>                 xlog("Error setting up credit control");
>>>>>>>>>>>>                 return;
>>>>>>>>>>>>         }
>>>>>>>>>>>>
>>>>>>>>>>>>          $var(count1)     = -1;
>>>>>>>>>>>>
>>>>>>>>>>>>          if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
>>>>>>>>>>>>                 xlog("Error getting customer's channel count");
>>>>>>>>>>>>         }
>>>>>>>>>>>>         xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count)
>>>>>>>>>>>> call(s)");
>>>>>>>>>>>>         xlog("L_INFO", "CNXCC ROUTE: $var(client) has
>>>>>>>>>>>> $var(count) call(s)");
>>>>>>>>>>>>
>>>>>>>>>>>>          if ($var(count1) == $var(max_chan1)) {
>>>>>>>>>>>>                 xlog("Too many channels for customer");
>>>>>>>>>>>>                 sl_send_reply(403, "Forbidden");
>>>>>>>>>>>>
>>>>>>>>>>>>                  #if (!cnxcc_terminate_all("$var(client)")) {
>>>>>>>>>>>>                 #       xlog("Error terminating customer's
>>>>>>>>>>>> calls");
>>>>>>>>>>>>                 #}
>>>>>>>>>>>>
>>>>>>>>>>>>                  exit;
>>>>>>>>>>>>         }
>>>>>>>>>>>> #!endif
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>  Could you please guide me where am I doing wrong ?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>  On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
>>>>>>>>>>>> carlos.ruizdiaz at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Any pseudo variable should work.
>>>>>>>>>>>>>
>>>>>>>>>>>>>  I don't exactly know how your business work, but I'd suggest
>>>>>>>>>>>>> that instead of using from header domain, use the domain part of the
>>>>>>>>>>>>> request-uri, $rd.
>>>>>>>>>>>>>
>>>>>>>>>>>>>  Regards,
>>>>>>>>>>>>> Carlos
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <
>>>>>>>>>>>>> rahul.ultimate at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thank you very much Carlos !
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  One last thing, can I use $fd in cnxcc_set_max_channels as
>>>>>>>>>>>>>> below -
>>>>>>>>>>>>>> cnxcc_set_max_channels("$fd", "$var(max_chan)");
>>>>>>>>>>>>>> to restrict the simultaneous calls hitting a particular
>>>>>>>>>>>>>> domain ?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>>>>>>>>>>>>>> carlos.ruizdiaz at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Create a profile [1], and count the number of calls of that
>>>>>>>>>>>>>>> profile [2].
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  Alternatively, you can use cnxcc module [3].
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  [1]
>>>>>>>>>>>>>>> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>>>>>>>>>>>>> [2]
>>>>>>>>>>>>>>> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>>>>>>>>>>>>>   [3]
>>>>>>>>>>>>>>> http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
>>>>>>>>>>>>>>> rahul.ultimate at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>    *Hello,*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *Please accept my apologies for asking a simple question - Is there any example which shows how can I create the dialog profile **value based on the SIP domain or SIP Server IP (IP like- 112.23.134.5). I** need to control many SIP Server IPs with limited channels to each with my** Kamailio Proxy.*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *I am a newbie to kamailio world.*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *-- Warm Regds. MathuRahul*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  _______________________________________________
>>>>>>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>>>>>>> sr-dev at lists.sip-router.org
>>>>>>>>>>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  --
>>>>>>>>>>>>>>> Carlos
>>>>>>>>>>>>>>> http://caruizdiaz.com
>>>>>>>>>>>>>>> http://ngvoice.com
>>>>>>>>>>>>>>> +52 55 3048 3303 <%2B52%2055%203048%203303>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>>>>>> sr-dev at lists.sip-router.org
>>>>>>>>>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  --
>>>>>>>>>>>>>>  Warm Regds.
>>>>>>>>>>>>>> MathuRahul
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>>>>> sr-dev at lists.sip-router.org
>>>>>>>>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>  --
>>>>>>>>>>>>> Carlos
>>>>>>>>>>>>> http://caruizdiaz.com
>>>>>>>>>>>>> http://ngvoice.com
>>>>>>>>>>>>> +52 55 3048 3303 <%2B52%2055%203048%203303>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>>>> sr-dev at lists.sip-router.org
>>>>>>>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>  --
>>>>>>>>>>>> Warm Regds.
>>>>>>>>>>>> MathuRahul
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>   --
>>>>>>>>>>> Warm Regds.
>>>>>>>>>>> MathuRahul
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>> sr-dev at lists.sip-router.org
>>>>>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  --
>>>>>>>>>> Carlos
>>>>>>>>>> http://caruizdiaz.com
>>>>>>>>>> http://ngvoice.com
>>>>>>>>>> +52 55 3048 3303 <%2B52%2055%203048%203303>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> sr-dev mailing list
>>>>>>>>>> sr-dev at lists.sip-router.org
>>>>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Warm Regds.
>>>>>>>>> MathuRahul
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> sr-dev mailing list
>>>>>>>>> sr-dev at lists.sip-router.org
>>>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>  --
>>>>>>>> Carlos
>>>>>>>> http://caruizdiaz.com
>>>>>>>> http://ngvoice.com
>>>>>>>> +52 55 3048 3303 <%2B52%2055%203048%203303>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> sr-dev mailing list
>>>>>>>> sr-dev at lists.sip-router.org
>>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Warm Regds.
>>>>>>> MathuRahul
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> sr-dev mailing list
>>>>>>> sr-dev at lists.sip-router.org
>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>  --
>>>>>> Carlos
>>>>>> http://caruizdiaz.com
>>>>>> http://ngvoice.com
>>>>>> +52 55 3048 3303 <%2B52%2055%203048%203303>
>>>>>>
>>>>>> _______________________________________________
>>>>>> sr-dev mailing list
>>>>>> sr-dev at lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Warm Regds.
>>>>> MathuRahul
>>>>>
>>>>
>>>>
>>>>
>>>>   --
>>>> Warm Regds.
>>>> MathuRahul
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev at lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>>  --
>>> Carlos
>>> http://caruizdiaz.com
>>> http://ngvoice.com
>>> +52 55 3048 3303 <%2B52%2055%203048%203303>
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev at lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Warm Regds.
>> MathuRahul
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
>  --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>
>
> _______________________________________________
> sr-dev mailing listsr-dev at lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
> --
> Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>
>
> _______________________________________________
> sr-dev mailing list
> sr-dev at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>


-- 
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-dev/attachments/20140609/d5509074/attachment-0001.html>

More information about the sr-dev mailing list