[sr-dev] [tracker] Task opened: record_route_advertised_address() does not add second rr

[sip-router]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Juha Heinanen (jh) 

Attached to Project - sip-router
Summary - record_route_advertised_address() does not add second rr
Task Type - Bug Report
Category - Module
Status - New
Assigned To - 
Operating System - All
Severity - Low
Priority - Normal
Reported Version - 3.3
Due in Version - Undecided
Due Date - Undecided
Details - rr readme on record_route_advertised_address() function tells:

   Note: A second Record-Route will be inserted if the transport used on
   the inbound and outbound interfaces changes.

that is not the case.  i made call

   record_route_advertised_address("192.98.103.10:5060");

when request came over udp and went out over tcp and only one rr header
was inserted:

incoming ngrep:

U 2012/09/17 17:30:17.467079 192.98.103.10:5060 -> 192.98.103.2:5070
INVITE sip:test at test.fi SIP/2.0.
....

outgoing ngrep:

T 2012/09/17 17:30:17.504631 192.98.103.10:5060 -> 192.98.103.10:38078 [AP]
INVITE sip:0x20b7580 at 192.98.103.10:5050;transport=tcp SIP/2.0.
Record-Route: <sip:192.98.103.10:5060;ftag=wumod;lr>.
....

i had not set enable_double_rr param and default is 1.

More information can be found at the following URL:
http://sip-router.org/tracker/index.php?do=details&task_id=248

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.