[sr-dev] question: kamailio on raspberrypi
Konstantin M.
evilzluk at gmail.com
Tue Dec 18 17:18:24 CET 2012
Hi
Today I'm a lucky holder of raspberry pi (
http://en.wikipedia.org/wiki/Raspberry_Pi) and I'd like to ask if anybody
interested in
kamailio on raspberry pi ?
Here is a small info:
root at raspberrypi:~# cat /proc/cpuinfo
Processor : ARMv6-compatible processor rev 7 (v6l)
BogoMIPS : 697.95
Features : swp half thumb fastmult vfp edsp java tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xb76
CPU revision : 7
Hardware : BCM2708
Revision : 000f
Serial : 000000007ec3235f
root at raspberrypi:~# free
total used free shared buffers cached
Mem: 448996 226812 222184 0 19740 179140
-/+ buffers/cache: 27932 421064
Swap: 102396 0 102396
dmesg is attached as file.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-dev/attachments/20121218/e791024e/attachment-0001.htm>
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.27+ (dc4 at dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #250 PREEMPT Thu Oct 18 19:03:02 BST 2012
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c050db28, node_mem_map c05b6000
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 113792 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708.boardrev=0xf bcm2708.serial=0x7ec3235f smsc95xx.macaddr=B8:27:EB:C3:23:5F sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1c000000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 448MB = 448MB total
[ 0.000000] Memory: 448872k/448872k available, 9880k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xe8000000 ( 184 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04c0e78 (4836 kB)
[ 0.000000] .init : 0xc04c1000 - 0xc04e0b10 ( 127 kB)
[ 0.000000] .data : 0xc04e2000 - 0xc050e1c0 ( 177 kB)
[ 0.000000] .bss : 0xc050e1e4 - 0xc05b5128 ( 668 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] timer_set_mode: unhandled mode:1
[ 0.000000] timer_set_mode: unhandled mode:3
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000947] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060150] pid_max: default: 32768 minimum: 301
[ 0.060633] Mount-cache hash table entries: 512
[ 0.061126] Initializing cgroup subsys cpuacct
[ 0.061218] Initializing cgroup subsys devices
[ 0.061254] Initializing cgroup subsys freezer
[ 0.061285] Initializing cgroup subsys blkio
[ 0.061432] CPU: Testing write buffer coherency: ok
[ 0.061772] hw perfevents: enabled with v6 PMU driver, 3 counters available
[ 0.062998] devtmpfs: initialized
[ 0.073414] NET: Registered protocol family 16
[ 0.074108] bcm2708.uart_clock = 0
[ 0.075729] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.075786] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.075825] mailbox: Broadcom VideoCore Mailbox driver
[ 0.075933] bcm2708_vcio: mailbox at f200b880
[ 0.076040] bcm_power: Broadcom power driver
[ 0.076080] bcm_power_open() -> 0
[ 0.076105] bcm_power_request(0, 8)
[ 0.576786] bcm_mailbox_read -> 00000080, 0
[ 0.576826] bcm_power_request -> 0
[ 0.576852] Serial: AMBA PL011 UART driver
[ 0.577010] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.886949] console [ttyAMA0] enabled
[ 0.912481] bio: create slab <bio-0> at 0
[ 0.917690] SCSI subsystem initialized
[ 0.921689] usbcore: registered new interface driver usbfs
[ 0.927418] usbcore: registered new interface driver hub
[ 0.933002] usbcore: registered new device driver usb
[ 0.939039] Switching to clocksource stc
[ 0.943287] FS-Cache: Loaded
[ 0.946468] CacheFiles: Loaded
[ 0.963233] NET: Registered protocol family 2
[ 0.968069] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.976246] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.984294] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.991251] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.997859] TCP reno registered
[ 1.001031] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 1.006949] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 1.013769] NET: Registered protocol family 1
[ 1.018908] RPC: Registered named UNIX socket transport module.
[ 1.025044] RPC: Registered udp transport module.
[ 1.029768] RPC: Registered tcp transport module.
[ 1.034519] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.041264] bcm2708_dma: DMA manager at dc808000
[ 1.046066] bcm2708_gpio: bcm2708_gpio_probe c04e9c18
[ 1.051525] vc-mem: phys_addr:0x00000000 mem_base=0x1c000000 mem_size:0x20000000(512 MiB)
[ 1.060819] audit: initializing netlink socket (disabled)
[ 1.066368] type=2000 audit(0.750:1): initialized
[ 1.182833] VFS: Disk quotas dquot_6.5.2
[ 1.187083] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.194634] FS-Cache: Netfs 'nfs' registered for caching
[ 1.200897] msgmni has been set to 876
[ 1.206767] io scheduler noop registered
[ 1.210737] io scheduler deadline registered (default)
[ 1.216182] io scheduler cfq registered
[ 1.241005] Console: switching to colour frame buffer device 90x30
[ 1.254852] kgdb: Registered I/O driver kgdboc.
[ 1.271740] brd: module loaded
[ 1.282590] loop: module loaded
[ 1.289198] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
[ 1.299353] vcos: [1]: vchiq_init_state: called
[ 1.307439] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
[ 1.317767] usbcore: registered new interface driver smsc95xx
[ 1.326212] cdc_ncm: 04-Aug-2011
[ 1.332124] usbcore: registered new interface driver cdc_ncm
[ 1.340513] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.554152] Core Release: 2.80a
[ 1.559930] Setting default values for core params
[ 1.567523] Finished setting default values for core params
[ 1.780925] Using Buffer DMA mode
[ 1.786869] Periodic Transfer Interrupt Enhancement - disabled
[ 1.795343] Multiprocessor Interrupt Enhancement - disabled
[ 1.803568] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.810484] Dedicated Tx FIFOs mode
[ 1.816891] dwc_otg: Microframe scheduler enabled
[ 1.816944] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.824486] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.834428] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.842536] Init: Port Power? op_state=1
[ 1.849090] Init: Power Port (0)
[ 1.855041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.864527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.874398] usb usb1: Product: DWC OTG Controller
[ 1.881683] usb usb1: Manufacturer: Linux 3.2.27+ dwc_otg_hcd
[ 1.890121] usb usb1: SerialNumber: bcm2708_usb
[ 1.898158] hub 1-0:1.0: USB hub found
[ 1.904625] hub 1-0:1.0: 1 port detected
[ 1.911786] dwc_otg: FIQ enabled
[ 1.911805] dwc_otg: NAK holdoff enabled
[ 1.911826] Module dwc_common_port init
[ 1.912169] usbcore: registered new interface driver uas
[ 1.920127] Initializing USB Mass Storage driver...
[ 1.927807] usbcore: registered new interface driver usb-storage
[ 1.936411] USB Mass Storage support registered.
[ 1.943842] usbcore: registered new interface driver libusual
[ 1.952505] mousedev: PS/2 mouse device common for all mice
[ 1.961583] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[ 1.967469] bcm2835-cpufreq: switching to governor powersave
[ 1.975740] bcm2835-cpufreq: switching to governor powersave
[ 1.984061] cpuidle: using governor ladder
[ 1.992960] cpuidle: using governor menu
[ 1.999390] sdhci: Secure Digital Host Controller Interface driver
[ 2.008149] sdhci: Copyright(c) Pierre Ossman
[ 2.015198] sdhci: Enable low-latency mode
[ 2.021660] bcm_power_open() -> 1
[ 2.027617] Registered led device: mmc0::
[ 2.029089] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 2.039553] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 2.048061] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.057637] Registered led device: led0
[ 2.058036] usbcore: registered new interface driver usbhid
[ 2.066165] usbhid: USB HID core driver
[ 2.079121] TCP cubic registered
[ 2.087008] Initializing XFRM netlink socket
[ 2.093922] NET: Registered protocol family 17
[ 2.105358] Indeed it is in host mode hprt0 = 00021501
[ 2.115179] Registering the dns_resolver key type
[ 2.130180] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 2.154150] registered taskstats version 1
[ 2.160886] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.179635] mmc0: problem reading SD Status register.
[ 2.193549] Waiting for root device /dev/mmcblk0p2...
[ 2.208761] mmc0: new high speed SDHC card at address b368
[ 2.233132] mmcblk0: mmc0:b368 SDC 3.74 GiB
[ 2.241994] mmcblk0: p1 p2
[ 2.319375] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.332984] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.351621] devtmpfs: mounted
[ 2.358486] Freeing init memory: 124K
[ 2.365157] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.375123] Indeed it is in host mode hprt0 = 00001101
[ 2.583480] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 2.593174] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.604721] hub 1-1:1.0: USB hub found
[ 2.611432] hub 1-1:1.0: 3 ports detected
[ 2.893368] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.023732] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.038559] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.055739] smsc95xx v1.0.4
[ 3.128786] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c3:23:5f
[ 3.233300] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ 3.346466] usb 1-1.3: New USB device found, idVendor=1d57, idProduct=ad02
[ 3.372519] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.408017] input: HID 1d57:ad02 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
[ 3.443832] generic-usb 0003:1D57:AD02.0001: input,hiddev0: USB HID v1.10 Keyboard [HID 1d57:ad02] on usb-bcm2708_usb-1.3/input0
[ 3.487504] input: HID 1d57:ad02 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/input/input1
[ 3.523761] generic-usb 0003:1D57:AD02.0002: input,hiddev0: USB HID v1.10 Mouse [HID 1d57:ad02] on usb-bcm2708_usb-1.3/input1
[ 3.907758] udevd[137]: starting version 175
[ 27.526834] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 27.971033] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 28.665694] bcm2835 ALSA card created!
[ 28.672956] bcm2835 ALSA chip created!
[ 28.698828] bcm2835 ALSA chip created!
[ 28.708902] bcm2835 ALSA chip created!
[ 28.722320] bcm2835 ALSA chip created!
[ 28.731127] bcm2835 ALSA chip created!
[ 28.739821] bcm2835 ALSA chip created!
[ 28.748475] bcm2835 ALSA chip created!
[ 116.128889] Adding 102396k swap on /var/swap. Priority:-1 extents:129 across:1754856k SS
[ 403.133899] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
More information about the sr-dev
mailing list