[sr-dev] Exposing additional dialog functions through API
Jason Penton
jason.penton at gmail.com
Fri Aug 12 15:14:18 CEST 2011
Hey Timo
On Fri, Aug 12, 2011 at 2:53 PM, Timo Reimann <timo.reimann at 1und1.de> wrote:
> Hey Jason,
>
>
> On 12.08.2011 13:50, Jason Penton wrote:
> > Ok, I agree with you on the reference counting - this can be avoided by
> > keeping the h_entry:h_id pair instead of a pointer to dlg. The reason I
> > was doing the ref was to make sure that the dialog module does not
> > delete a dialog under a modules feet (in which case a module would hold
> > a pointer to memory that has been freed). However, to avoid this we can
> > just call lookup_dlg passing in the entry:id pair. (another reason why
> > we would need lookup_dlg to be exposed ;)
>
> A much easier approach IMHO would be to register a callback to
> DLGCB_DESTROY or DLGCB_TERMINATE. That way, you'll be notified
> automatically when the dialog is destroyed/terminated and don't need to
> deal with implementation details such as hash table keys.
>
> You could also use other dialog callbacks to react to specific dialog
> lifetime phases. See the docs for details.
>
yes, we do this already, BUT we need a link to a dialog that can be used
"outside" of the callbacks. For example. Lets take the Rx interface. We
could get a message from the network saying there is a problem on the
bearer, static the PCC sessions affected. In this case:
a) we need to find the associated / affected dialogs
b) terminate them
>
> > If we just use as one example the Ro interface we have built.
> > Effectivley Ro is used in the IMS world for online charging (i.e.
> > realtime charing during the call). So naturally, this module is dialog
> > aware. What we do is keep a mapping between the dialog and the
> > particular Ro session (Ro session exists between Kamailio and an OCS
> > (online charging system). This is the reason for storing the dialog
> > pointer or id pairs. Now, when we run out of credit - the OCS will deny
> > a new batch of requested credit. In this case we lookup the
> > corresponding dialog associated to the Ro session and tear it down,
> > using terminate_dlg function
>
> If you really need to terminate calls proxy-wise, I agree you need some
> terminate function. It's usefulness might be restricted in your case as
> mischievious clients may just ignore your BYE request. I don't know your
> exact setup, however, so this objection might not count.
>
correct, but dont forget in the IMS case the bearer will be torn down in
which case the 'client' wont be able to send or receive RTP ;)
>
> Assuming that it holds I think dialog callbacks, again, are the way to
> hook into the dialog module. Just keep registering for new dialogs
> (possibly "confirmed" ones only) and make your module logic keep track
> of credits during the course of the call. Should the account drop to
> zero while the dialog is still active, force termination.
>
> Termination, by the way, could also be implemented by letting your
> module run a particular Kamailio route on zero credits which, in turn,
> could call dlg_end_dlg(). That way, you wouldn't need to export another
> function. I am not strictly against exporting the termination function
> on C level though, just wanted to mention the route approach.
>
yes this is one of the options we did think about, BUT we thought that if
someone wanted to implement an Ro interface they may not want to have to
'configure' the config file to make it work properly and according to the
standard. but yest this still remains a good option.
>
>
>
> > I really think there are a number of scenarios where these extended API
> > functions could be used so as to ensure modules don't have to replicate
> > what alrady exists in the dialog module, from both memory and processing
> > perspective.
>
> I'd be interested to know whether all these scenarios can be covered by
> means of using the dialog callbacks as they nicely isolate
> implementation details from dialog usage. If there are cases where
> callbacks don't suffice, we can think about ways to work around. In my
> opinion, that should go by enhancing the callback mechanism accordingly.
>
the dialog callbacks work great for Dialog initiated events, but not so
nicely when you have triggers/events coming from other stimuli and in which
you no longer have access to the appropriate information.
I think at a minimum it may be a good thing to expose terminate_dlg at C
level API afterall you would think that this would be a natural sort of
function to expose. As far as the others are concerned lets see if we can
work around.
One other thing we were thinking of is adding a rivet gun framework to the
dialog module. Here you could effectively added meta information to a dialog
through the callbacks for module specific (dialog-relayed) information. So
in essence you can think of attaching nuggets of information (rivets) to the
dialog in the form a void*. the modules could then also possible pass a
code/decode function for the void* to the appropriate information for that
module (more like a serialiser/deserialiser actually).
I think this could also add some nice value as it will prevent modules
having to store extra references in their own code to map data to a dialog.
p.s. thanks for you indepth look into this and your valuable comments
Cheers
Jason
>
>
> Cheers,
>
> --Timo
>
>
>
> > On Fri, Aug 12, 2011 at 12:58 PM, Timo Reimann <timo.reimann at 1und1.de
> > <mailto:timo.reimann at 1und1.de>> wrote:
> >
> > Hey Jason,
> >
> >
> > On 12.08.2011 12:54, Jason Penton wrote:
> > > this wont be available to configuration users but to other modules
> > > through API.
> >
> > Ok, thanks for clarifying this. Still, allowing other modules to
> fiddle
> > with referencing counting is a no-go IMHO.
> >
> >
> > > On phone now so will respond to use cases when I'm back at my PC
> >
> > Sounds good!
> >
> >
> > Cheers,
> >
> > --Timo
> >
> >
> >
> > > On Aug 12, 2011 12:48 PM, "Timo Reimann" <timo.reimann at 1und1.de
> > <mailto:timo.reimann at 1und1.de>
> > > <mailto:timo.reimann at 1und1.de <mailto:timo.reimann at 1und1.de>>>
> wrote:
> > >> Hey,
> > >>
> > >>
> > >> On 12.08.2011 12:33, Jason Penton wrote:
> > >>> We are currently refactoring and cleaning the various IMS
> > modules for
> > >>> inclusion into SR, diameter_rx, diameter_cxdx, diameter_ro, etc.
> > >>>
> > >>> One thing we have noticed is that the use of dialog module
> functions
> > >>> would make the code alot better and cleaner, so 2 questions:
> > >>>
> > >>> 1. why is the Dialog module not exposing more if its methods?
> > >>> 2. Can we put in a patch to expose the ones we require.
> > >>>
> > >>> Currently, we have exposed and are using the following:
> > >>>
> > >>> lookup_dlg;
> > >>> terminate_dlg;
> > >>> get_dlg;
> > >>> unref_dlg;
> > >>> ref_dlg;
> > >>
> > >> I strongly opt against exporting any functions related to
> reference
> > >> management. It's already hard to handle reference counting
> properly
> > >> inside the module; allowing configuration users to touch that part
> of
> > >> the module will likely result in all kinds of ugly bugs. IMHO,
> > it's best
> > >> to keep it internal and provide functions to whatever feature you
> > like.
> > >> There's already a bunch of dialog PVs and (more recently) the very
> > >> generic dialog variable mechanism which allows you to do a series
> of
> > > things.
> > >>
> > >> Regarding the other functions you mentioned, can you outline what
> > your
> > >> use case for those is?
> > >>
> > >>
> > >> Cheers,
> > >>
> > >> --Timo
>
> _______________________________________________
> sr-dev mailing list
> sr-dev at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-dev/attachments/20110812/204c2026/attachment-0001.htm>
More information about the sr-dev
mailing list