[OpenSER-Devel] [ openser-Bugs-1818610 ] [lcr] load_contacts() forgets bflag of "location" table

[SourceForge.net]

Bugs item #1818610, was opened at 2007-10-23 16:06
Message generated for change (Comment added) made by ibc_sf
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=1818610&group_id=139143

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: modules
Group: ver 1.2.x
Status: Closed
Resolution: Invalid
Priority: 5
Private: No
Submitted By: Iñaki Baz (ibc_sf)
Assigned to: Nobody/Anonymous (nobody)
Summary: [lcr] load_contacts() forgets bflag of "location" table

Initial Comment:
In serial forwarding with different "q" values contacts bflags are forgotten.

I have this "location" table:

  username    domain       contact                     received               cflags   q
  800         domain.org   sip:800 at 192.168.1.33:5060   sip:82.35.221.20:5060  192      0.80
  800         domain.org   sip:800 at 192.168.1.33:5080   sip:82.35.221.20:5080  192      0.50

Both contacts behind NAT and different "q".

I fix NAT for each branch in "branch_route[1]" in case of parallel forking. It works OK.


But since I added serial forwarding with load_contacts() and next_contacts() after lookup("location") and next_contacts() in "failure_route[1]" NAT doesn't work because those two functions forget the bflag(6).

In fact, the issue is worse since in "failure_route[1]" I do next_contacts() but in this case the INVITE is sent to 192.168.1.133:5080 instead the public IP !!!!

Is there any way to solve it? or is it a bug on lcr functions handling contacts bflags and "received" field?


----------------------------------------------------------------------

>Comment By: Iñaki Baz (ibc_sf)
Date: 2007-10-24 13:52

Message:
Logged In: YES 
user_id=1844020
Originator: YES

It seems to work now in SVN 2983. ;)

Thanks.

PD: Not sure if I should close the bug since the fix is for 1.3 version
and the bug is reported for 1.2 (I know there won't be a backport).

----------------------------------------------------------------------

Comment By: Iñaki Baz (ibc_sf)
Date: 2007-10-23 19:40

Message:
Logged In: YES 
user_id=1844020
Originator: YES

Ok, I'll install SVN version and try it.

Thanks.

----------------------------------------------------------------------

Comment By: Nobody/Anonymous (nobody)
Date: 2007-10-23 19:30

Message:
Logged In: NO 

i think this

http://openser.svn.sourceforge.net/viewvc/openser?view=rev&revision=2696

fixes your problem.

because of the complexity, there will not be a backport to 1.2.

-- juha

----------------------------------------------------------------------

Comment By: Iñaki Baz (ibc_sf)
Date: 2007-10-23 19:04

Message:
Logged In: YES 
user_id=1844020
Originator: YES

Sorry, I forgot.
It's OpenSer 1.2.2-1 of Debian Sid.

----------------------------------------------------------------------

Comment By: Nobody/Anonymous (nobody)
Date: 2007-10-23 17:40

Message:
Logged In: NO 

when you file an item like this, please tell which version of openser this
applies to.

-- juha


----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=1818610&group_id=139143