[Devel] why does parse error occurs, it seems to be definitely
right!
Norman Brandinger
norm at goes.com
Tue Mar 6 14:22:34 CET 2007
I was mistaken about the c-stye comments being supported.
Just tested again and found that I should have stated: "c++ style"
comments ('//') are not supported...
Regards,
Norm
Norman Brandinger wrote:
> Haven't tested this recently, but I do remember a recent parse error
> using "c-style" comments. Remove the '/* ... */' and see if your problem
> goes away.
>
> If this is the case, I'm sorry about not posting it to the bug-tracker
> earlier.
>
> Norm
>
>
> Daniel-Constantin Mierla wrote:
>
>> Hello,
>>
>> what revision of openser do you use? Try "svnversion -c" inside the
>> source tree.
>>
>> It is very strange that it gets the error at the first line, which seems
>> to be a comment...
>>
>> Cheers,
>> Daniel
>>
>>
>> On 03/06/07 08:59, sukerry wrote:
>>
>>
>>> I found all the config files triger the same error!
>>>
>>>
>>>
>>>
>>>> Hi,
>>>> OpenSER print the error " 0(7139) parse error (1,1-3): syntax error" when it parse the config file below, I am very confused:
>>>>
>>>> #
>>>> # $Id$
>>>> #
>>>> # simple quick-start config script
>>>> #
>>>>
>>>> # ----------- global configuration parameters ------------------------
>>>>
>>>> /* Uncomment these lines to enter debugging mode */
>>>> debug=7 # debug level (cmd line: -dddddddddd)
>>>> fork=no
>>>> log_stderror=yes
>>>>
>>>> check_via=no # (cmd. line: -v)
>>>> dns=no # (cmd. line: -r)
>>>> rev_dns=no # (cmd. line: -R)
>>>> listen=udp:10.10.10.10:5060
>>>> children=4
>>>>
>>>>
>>>> #
>>>> # uncomment the following lines for TLS support
>>>> #disable_tls = 0
>>>> #listen = tls:your_IP:5061
>>>> #tls_verify_server = 1
>>>> #tls_verify_client = 1
>>>> #tls_require_client_certificate = 0
>>>> #tls_method = TLSv1
>>>> #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
>>>> #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
>>>> #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
>>>>
>>>> # ------------------ module loading ----------------------------------
>>>> mpath="/usr/local/lib/openser/modules/"
>>>>
>>>> loadmodule "mysql.so"
>>>> loadmodule "sl.so"
>>>> loadmodule "maxfwd.so"
>>>> loadmodule "textops.so"
>>>> loadmodule "tm.so"
>>>> loadmodule "rr.so"
>>>> loadmodule "presence.so"
>>>> loadmodule "avpops.so"
>>>>
>>>> loadmodule "usrloc.so"
>>>> loadmodule "registrar.so"
>>>> loadmodule "mi_fifo.so"
>>>>
>>>>
>>>> # Uncomment this if you want digest authentication
>>>> # mysql.so must be loaded !
>>>> #loadmodule "/usr/local/lib/openser/modules/auth.so"
>>>> #loadmodule "/usr/local/lib/openser/modules/auth_db.so"
>>>>
>>>> # ----------------- setting module-specific parameters ---------------
>>>>
>>>> # -- usrloc params --
>>>> # Uncomment this if you want to use SQL database
>>>> # for persistent storage and comment the previous line
>>>> modparam("usrloc", "db_mode", 2)
>>>>
>>>> # -- auth params --
>>>> # Uncomment if you are using auth module
>>>> #
>>>> #modparam("auth_db", "calculate_ha1", yes)
>>>> #
>>>> # If you set "calculate_ha1" parameter to yes (which true in this config),
>>>> # uncomment also the following parameter)
>>>> #
>>>> #modparam("auth_db", "password_column", "password")
>>>>
>>>> # -- rr params --
>>>> # add value to ;lr param to make some broken UAs happy
>>>> modparam("rr", "enable_full_lr", 1)
>>>>
>>>> # -- presence params --
>>>> modparam("presence|usrloc", "db_url",
>>>> "mysql://openser:openserrw@127.0.0.1/openser")
>>>> modparam("presence", "max_expires", 3600)
>>>> modparam("presence", "force_active", 1)
>>>> modparam("presence", "server_address", "sip:10.10.10.10:5060" )
>>>>
>>>> # -- mi_fifo params --
>>>> modparam("mi_fifo","fifo_name", "/tmp/openser_fifo")
>>>>
>>>> # ------------------------- request routing logic -------------------
>>>>
>>>> # main routing logic
>>>>
>>>> route{
>>>> # initial sanity checks -- messages with
>>>> # max_forwards==0, or excessively long requests
>>>> if (!mf_process_maxfwd_header("10")) {
>>>> sl_send_reply("483","Too Many Hops");
>>>> exit;
>>>> };
>>>>
>>>> if (msg:len >= 2048 ) {
>>>> sl_send_reply("513", "Message too big");
>>>> exit;
>>>> };
>>>>
>>>> # we record-route all messages -- to make sure that
>>>> # subsequent messages will go through our proxy; that's
>>>> # particularly good if upstream and downstream entities
>>>> # use different transport protocol
>>>> if (!method=="REGISTER")
>>>> record_route();
>>>>
>>>> # subsequent messages withing a dialog should take the
>>>> # path determined by record-routing
>>>> if (loose_route()) {
>>>> # mark routing logic in request
>>>> append_hf("P-hint: rr-enforced\r\n");
>>>> route(1);
>>>> };
>>>>
>>>> if (!uri==myself) {
>>>> # mark routing logic in request
>>>> append_hf("P-hint: outbound\r\n");
>>>> # if you have some interdomain connections via TLS
>>>> #if(uri=~"@tls_domain1.net") {
>>>> # t_relay("tls:domain1.net");
>>>> # exit;
>>>> #} else if(uri=~"@tls_domain2.net") {
>>>> # t_relay("tls:domain2.net");
>>>> # exit;
>>>> #}
>>>> route(1);
>>>> };
>>>>
>>>> # if the request is for other domain use UsrLoc
>>>> # (in case, it does not work, use the following command
>>>> # with proper names and addresses in it)
>>>> if (uri==myself) {
>>>>
>>>> # presence handling
>>>> if( is_method("PUBLISH|SUBSCRIBE"))
>>>> route(2);
>>>>
>>>> if (method=="REGISTER") {
>>>>
>>>> # Uncomment this if you want to use digest authentication
>>>> #if (!www_authorize("openser.org", "subscriber")) {
>>>> # www_challenge("openser.org", "0");
>>>> # exit;
>>>> #};
>>>>
>>>> save("location");
>>>> exit;
>>>> };
>>>>
>>>> # native SIP destinations are handled using our USRLOC DB
>>>> if (!lookup("location")) {
>>>> sl_send_reply("404", "Not Found");
>>>> exit;
>>>> };
>>>> append_hf("P-hint: usrloc applied\r\n");
>>>> };
>>>>
>>>> route(1);
>>>> }
>>>>
>>>>
>>>> route[1] {
>>>> # send it out now; use stateful forwarding as it works reliably
>>>> # even for UDP2TCP
>>>> if (!t_relay()) {
>>>> sl_reply_error();
>>>> };
>>>> exit;
>>>> }
>>>>
>>>> # presence handling route
>>>> route[2]
>>>> {
>>>> # absorb retransmissions
>>>> if (! t_newtran())
>>>> {
>>>> sl_reply_error();
>>>> exit;
>>>> };
>>>>
>>>> if(is_method("PUBLISH"))
>>>> {
>>>> handle_publish();
>>>> t_release();
>>>> } else if( is_method("SUBSCRIBE")) {
>>>> handle_subscribe();
>>>> t_release();
>>>> };
>>>>
>>>> exit;
>>>> }
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Devel mailing list
>>>> Devel at openser.org
>>>> http://openser.org/cgi-bin/mailman/listinfo/devel
>>>>
>>>>
>>>>
>>>>
>>> = = = = = = = = = = = = = = = = = = = =
>>>
>>>
>>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡
>>>
>>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡sukerry
>>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡sukerry at 126.com
>>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2007-03-06
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Devel mailing list
>>> Devel at openser.org
>>> http://openser.org/cgi-bin/mailman/listinfo/devel
>>>
>>>
>>>
>> _______________________________________________
>> Devel mailing list
>> Devel at openser.org
>> http://openser.org/cgi-bin/mailman/listinfo/devel
>>
>>
>>
>>
>
>
> _______________________________________________
> Devel mailing list
> Devel at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/devel
>
>
>
More information about the Devel
mailing list