[Devel] How I configure kdevelop to see the debug of any module?

[Javier Ramirez]

How I configure kdevelop to see the debug of any module?

    From: Javier Ramirez 
    To: Ron Winacott ; devel at openser.org 
    Sent: Friday, July 14, 2006 11:11 AM
    Subject: Re: [Devel] kdevelop ?


    I don't undestand.
    How attach/debug openser ?

    best regards




    Javier,
    The problem is kdevelop must debug (attach its self to) a main process and 
    the modules in OpenSER/SER ae dynamically loaded libraries (*.so = shared 
    object) To debug the module code, you must attach/debug openser then set a 
    break point in your module code so when the openser.cfg 
    line "loadmodule /usr/local/openser/modules/YourMod.so" is run openser will 
    call dl_open() and locate the module expore structure. Then it will call the 
    modules exported initialization function. (mod_init() or something along 
    those lines, depending on what you called it., look at the source in the 
    struct module_exports exports { structure)

    Once you have stopped the debugger in your module you should be able to see 
    the source, symbols, etc of your module and set break points. 

    The other issues (bigger one in my mind) is you must start openser 
    in "non-forking" mode to stop it from creating a bunch of listener processes 
    where in each one you are running a copy of your module. In the openser.cfg 
    set "fork=no" to stop it from forking. Also you waht to make sure you debug 
    the correct process. If you start openser, then run "openserctl ps" you will 
    see a list of processes. You what to debug the "receiver" process. It is the 
    one that will call into your module.

    Hope this helps,
    ronw

    -- 
    Ron Winacott - SOMA Networks, Inc.
    ---
    The scientists of today think deeply instead of clearly. One must be sane to 
    think clearly, but one can think deeply and be quite insane.
     - Nikola Tesla



      ----- Original Message ----- 
      From: Ron Winacott 
      To: devel at openser.org 
      Cc: Javier Ramirez 
      Sent: Thursday, July 06, 2006 3:15 PM
      Subject: Re: [Devel] kdevelop ?


      On Thursday 06 July 2006 11:15, Javier Ramirez wrote:
      > Hi, I have a problem with my module,
      > when I try debug using kdevelop, rhis don't show me a debug of my module,
      > only show the debug of openser.
      >
      > How I configure kdevelop to see the debug of any module?
      > or, can you recomend any program to use for this ?
      > best regards
      > Javier Ramirez




----------------------------------------------------------------------------


    _______________________________________________
    Devel mailing list
    Devel at openser.org
    http://openser.org/cgi-bin/mailman/listinfo/devel



------------------------------------------------------------------------------


  _______________________________________________
  Devel mailing list
  Devel at openser.org
  http://openser.org/cgi-bin/mailman/listinfo/devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://openser.org/pipermail/devel/attachments/20060717/1c773bb5/attachment-0001.html