[Devel] [ openser-Patches-1440902 ] Loadbalancing with Path-HF with NAT-Support

SourceForge.net noreply at sourceforge.net
Fri Apr 7 18:26:28 CEST 2006


Patches item #1440902, was opened at 2006-03-01 13:41
Message generated for change (Settings changed) made by bogdan_iancu
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=743022&aid=1440902&group_id=139143

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: modules
Group: None
>Status: Closed
Resolution: Accepted
Priority: 5
Submitted By: Andreas Granig (agranig)
Assigned to: Andreas Granig (agranig)
Summary: Loadbalancing with Path-HF with NAT-Support

Initial Comment:
Attached is a new module "path", which allows a
intermediate proxy to add it's URI into a Path-HF in
various ways:

- add_path(): Adds URI including the address of the
outgoing interface as Path-HF in the form of "Path:
<sip:1.2.3.4:5060>"

- add_path_received(): like the above, but adds a
parameter "received=sip:2.3.4.5:1234" to the URI to
pass the received-address of an UAC to a registrar

- both of the above functions also allow to pass a
userpart for the Path-URI, so add_path("loadbalancer")
results in a Path-HF "Path:
<sip:loadbalancer at 1.2.3.4:5060>"

- If the module parameter "use_received" is set to 1,
the module hooks into rr-processsing and sets the
"received"-parameter of a Route-URI as destination-uri
if available. This is used in combination with
add_path_received(), where subsequent requests are sent
to the received-address of the initial registration
(aka the URI given in the received-parameter of the
Path-HF).


Also attached you can find a patch to the registrar
module, which allows to store the URI in the
received-parameter of the first Path-HF as
received-value of usrloc and set the NAT flag for this
contact. This feature can be enabled by setting the
parameter "path_use_received" of the registrar module
to 1. 
One should be aware that nat-pinging of such a contact
isn't supported by nathelper/mediaproxy yet, but the
values are in place (since I use an external
application for nat-pinging).

----------------------------------------------------------------------

Comment By: Bogdan (bogdan_iancu)
Date: 2006-03-03 16:33

Message:
Logged In: YES 
user_id=1275325

Andreas,
I applied the patch to the register module. Please feel free
to upload the module on the CVS.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=743022&aid=1440902&group_id=139143



More information about the Devel mailing list