[Devel] openser and asterisk

[Daniel-Constantin Mierla]

As I can see, your problem is to establish a call between two sip 
phones, which does not need the usage of asterisk. Make sure you save 
the contact address of the sip phones and you lookup them when the call 
is initiated. The default configuration script of openser 
(http://cvs.sourceforge.net/viewcvs.py/openser/sip-server/etc/openser.cfg?rev=1.3&view=auto) 
manages such case.

Daniel


On 09/29/05 18:05, Matt L. Zhu wrote:

> has anyone successfully setup openser as the frontend proxy for 
> asterisk? here is my setup
>
> /etc/asterisk/sip.conf
> [general]
> context=default
> port=5065
> bindaddr=0.0.0.0
> srvlookup=yes
>
> [ser]
> type=user
> context=proxy
> host=192.168.0.10
>
> then i edited openser.cfg to do something like this
>
>            if 
> (uri=~"sip:[a-zA-Z\.]*@(xxx\.xxx\.com)|(192\.168\.0\.10)") {
>                    forward( localhost, 5065 );
>                    break;
>            };
>
> i connected two sipphones (wengo) in this case to openser, but calls 
> are not going through at all, connecting directly to asterisk works. 
> have anyone worked in this situation?
>
> thanks
>
>
>
> _______________________________________________
> Devel mailing list
> Devel at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/devel
>