[Devel] Re: [Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius Accounting

'Jan Janak' jan at iptel.org
Wed Nov 16 21:44:50 CET 2005


Yes, this can happen if the callee sends BYE. In this case the URIs in
>From and To header fields are swapped.

The only SIP RADIUS related document (which has expired a long time ago)
says that Calling-Station-Id is the URI from From header field of any
SIP request. Thus -- according this I-D it is correct. But use of RADIUS
with SIP is underspecified so there is no real standard for this.

I don't think it matters that much, because other attributes, namely
Acct-Session-Id are used to match start and stop radius requests.

We could determine who sent the BYE from the value of ftag parameter in
Route header field and swap the values, the question is whether this
makes sense. The billing system could take all info from start requests
and use the stop request to calculate the session duration only.

  Jan.

On 16-11-2005 15:04, Lenir wrote:
> Ok, that put the right things in place. However, here's a twist: 
> Either way, wit switching Sip-Translated-Request-URI and Called-Station-ID
> around, or not, the CDRs are sent differently depending on who "hands up"
> the call. For example, notice the User-Name, Calling-Station-ID and
> Called-Station-ID:
> 
> User 1000 calls 15615551212, and user 1000 hangs up: 
> =====================================================
> rad_recv: Accounting-Request packet from host 216.82.124.29:39228, id=206,
> length=306
>         Acct-Status-Type = Start
>         Service-Type = Sip-Session
>         Acct-Terminate-Cause = 200
>         Error-Cause = Invite
>         User-Name = "1000 at 216.82.124.29"
>         Calling-Station-Id = "sip:1000 at 216.82.124.29"
>         Sip-Translated-Request-URI =
> "sip:15617220966 at 216.82.124.29;user=phone"
>         Called-Station-Id =
> "sip:949449852150#15617220966 at 216.82.124.30;user=phone"
>         Acct-Session-Id = "000d2890-d47f01f5-6410e8bd-4baf0435 at 66.232.8.116"
>         Sip-To-Tag = "33C5A3C-76A"
>         Sip-From-Tag = "000d2890d47f24f85e6c0b91-0092ab53"
>         Sip-CSeq = "102"
>         NAS-IP-Address = 216.82.124.29
>         NAS-Port = 5060
>         Acct-Delay-Time = 0
> rlm_sql (sql): Reserving sql socket id: 15
> rlm_sql (sql): Released sql socket id: 15
> Sending Accounting-Response of id 206 to 216.82.124.29:39228
> rad_recv: Accounting-Request packet from host 216.82.124.29:39228, id=207,
> length=300
>         Acct-Status-Type = Stop
>         Service-Type = Sip-Session
>         Acct-Terminate-Cause = 200
>         Error-Cause = 8
>         User-Name = "1000 at 216.82.124.29"
>         Calling-Station-Id = "sip:1000 at 216.82.124.29"
>         Sip-Translated-Request-URI =
> "sip:15617220966 at 216.82.124.29;user=phone"
>         Called-Station-Id =
> "sip:949449852150#15617220966 at 216.82.124.30:5060"
>         Acct-Session-Id = "000d2890-d47f01f5-6410e8bd-4baf0435 at 66.232.8.116"
>         Sip-To-Tag = "33C5A3C-76A"
>         Sip-From-Tag = "000d2890d47f24f85e6c0b91-0092ab53"
>         Sip-CSeq = "103"
>         NAS-IP-Address = 216.82.124.29
>         NAS-Port = 5060
>         Acct-Delay-Time = 0
> 
> 
> User 1000 calls 15615551212, and user 15615551212 hangs up: 
> ===========================================================
> 
> rad_recv: Accounting-Request packet from host 216.82.124.29:39227, id=200,
> length=306
>         Acct-Status-Type = Start
>         Service-Type = Sip-Session
>         Acct-Terminate-Cause = 200
>         Error-Cause = Invite
>         User-Name = "1000 at 216.82.124.29"
>         Calling-Station-Id = "sip:1000 at 216.82.124.29"
>         Sip-Translated-Request-URI =
> "sip:15617220966 at 216.82.124.29;user=phone"
>         Called-Station-Id =
> "sip:949449852150#15617220966 at 216.82.124.30;user=phone"
>         Acct-Session-Id = "000d2890-d47f01f4-372dff4b-793d4acc at 66.232.8.116"
>         Sip-To-Tag = "33B37E4-77B"
>         Sip-From-Tag = "000d2890d47f24f639ccef77-4ef08b02"
>         Sip-CSeq = "102"
>         NAS-IP-Address = 216.82.124.29
>         NAS-Port = 5060
>         Acct-Delay-Time = 0
> rlm_sql (sql): Reserving sql socket id: 1
> rlm_sql (sql): Released sql socket id: 1
> Sending Accounting-Response of id 200 to 216.82.124.29:39227
> rad_recv: Accounting-Request packet from host 216.82.124.29:39227, id=201,
> length=286
>         Acct-Status-Type = Stop
>         Service-Type = Sip-Session
>         Acct-Terminate-Cause = 200
>         Error-Cause = 8
>         User-Name = "15617220966 at 216.82.124.29"
>         Calling-Station-Id = "sip:15617220966 at 216.82.124.29;user=phone"
>         Sip-Translated-Request-URI = "sip:1000 at 216.82.124.29"
>         Called-Station-Id = "sip:1000 at 66.232.8.116:5061"
>         Acct-Session-Id = "000d2890-d47f01f4-372dff4b-793d4acc at 66.232.8.116"
>         Sip-To-Tag = "000d2890d47f24f639ccef77-4ef08b02"
>         Sip-From-Tag = "33B37E4-77B"
>         Sip-CSeq = "101"
>         NAS-IP-Address = 216.82.124.29
>         NAS-Port = 5060
>         Acct-Delay-Time = 0
> 
> 
> Shouldn't it always be that the User-Name attribute is the user who
> initiated the call?
> 
> Lenir
> 
> -----Original Message-----
> From: users-bounces at openser.org [mailto:users-bounces at openser.org] On Behalf
> Of 'Jan Janak'
> Sent: Wednesday, November 16, 2005 1:53 PM
> To: lsantiago at globalgatewaycom.com
> Cc: serdev at iptel.org; serusers at iptel.org; users at openser.org;
> devel at openser.org
> Subject: Re: [Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius
> Accounting
> 
> Either reconfigure the billing application to use
> Sip-Translated-Request-URI (recommended) or change the ID of the
> attribute in the radiusclient dictionary as suggested by Bogdan.
> 
> In this particular example you should set Called-Station-Id to 107.
> 
>   Jan.
> 
> On 16-11-2005 13:09, 'Lenir' wrote:
> > Ok, so how do I tell acc.so to send Sip-Translated-Request-URI as the
> > Called-Station-ID instead?
> > 
> > Lenir Santiago, Partner
> > Global Gateway Communications, Inc.
> > 2500 Quantum Lakes Drive, Ste. 203
> > Boynton Beach, FL 33426
> > Office: 561-853-2213
> > Cell: 561-722-0966
> > Fax: 877-875-0060
> > http://www.globalgatewaycom.com
> > 
> > -----Original Message-----
> > From: 'Jan Janak' [mailto:jan at iptel.org] 
> > Sent: Wednesday, November 16, 2005 11:29 AM
> > To: Bogdan-Andrei Iancu
> > Cc: Lenir; 'Lenir Santiago'; serdev at iptel.org; serusers at iptel.org;
> > devel at openser.org; users at openser.org
> > Subject: Re: [Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius
> > Accounting
> > 
> > Why would you do something like this ? All the info that is needed is in
> > Sip-Translated-Ruquest-ID below. You can see it in the RADIUS dump:
> > 
> > Sip-Translated-Request-URI = "sip:949449852150#15615551212 at gateway:5060"
> > 
> >   Jan.
> > 
> > On 16-11-2005 16:50, Bogdan-Andrei Iancu wrote:
> > > Hi Lenir,
> > > 
> > > you can keep the modified To value into an AVP and use the extra 
> > > accounting feature to log it. See
> > >       http://www.openser.org/docs/modules/1.1.x/acc.html#AEN115
> > > and
> > >       http://www.openser.org/docs/modules/1.1.x/acc.html#AEN350
> > > 
> > > the problem is how to set it as Called-Station-ID attribute in order to 
> > > avoid overlapping. You can do a trick by playing with the radius 
> > > dictionary (on proxy side) :
> > >    changed the Called-Station-ID to a different ID attribute
> > >    set extra accounting with the original attribute ID of
> > Called-Station-ID
> > > in this way the acc will set de default TO as something else and you AVP
> 
> > > as Called-Station-ID ;)
> > > 
> > > regards,
> > > bogdan
> > > 
> > > 
> > > Lenir wrote:
> > > 
> > > >Well, if userA dials to:30, 30 gets translated to:15615551212 and SER
> > dials
> > > >15615551212, how can I make the acc.so module send the modified
> > > >to:15615551212 as the Called-Station-ID attribute? 
> > > >
> > > >This is important for billing, specially if someone forwards to a long
> > > >distance or international long distance number.
> > > >
> > > >-----Original Message-----
> > > >From: serusers-bounces at iptel.org [mailto:serusers-bounces at iptel.org] On
> > > >Behalf Of Jan Janak
> > > >Sent: Wednesday, November 16, 2005 3:15 AM
> > > >To: Lenir Santiago
> > > >Cc: serdev at iptel.org; serusers at iptel.org; users at openser.org;
> > > >devel at openser.org
> > > >Subject: [Serusers] Re: [Serdev] Inaccurate Radius Accounting
> > > >
> > > >Hello,
> > > >
> > > >Called-Station-Id attribute always contains the To URI (not
> > > >Request-URI). You can find the outbound Request-URI in
> > > >Sip-Translated-Request-URI attribute.
> > > >
> > > >Even if you rewrite To header field, it will never be accounted in
> > > >Called-Station-Id.
> > > >
> > > > Jan.
> > > >
> > > >On 15-11-2005 21:59, Lenir Santiago wrote:
> > > > 
> > > >
> > > >>Hey guys,
> > > >>
> > > >>
> > > >>
> > > >>I'm using Radius to do pretty much everything regarding my users, i.e.
> > > >>registrations, authorization, features and preferences. I implemented
> my
> > > >>   
> > > >>
> > > >own
> > > > 
> > > >
> > > >>way of doing speeddial by using AVPs provided by radius and AVPOPs
> > module,
> > > >>Here is the snippet:
> > > >>
> > > >>
> > > >>
> > > >>AVP-SIP = speedial:30:15615551212
> > > >>
> > > >>
> > > >>
> > > >>               avp_subst("s:caller_speedial/i:99", "/(.*):(.*)/\2/");
> > > >>#15615551212
> > > >>
> > > >>               avp_printf("i:98","$rU:*"); #30
> > > >>
> > > >>               avp_printf("i:97","sip:$avp($temp2)@$td"); #
> > > >>sip:15615551212 at xx.xx.xx.xx
> > > >>
> > > >>               avp_printf("i:96","<sip:$avp($temp2)@$td>\r\n"); #
> > > >><sip:15615551212 at xx.xx.xx.xx>.
> > > >>
> > > >>               xlog("L_N","    SPEEDIALING: $fU is speed-dialing
> > > >>$hdr(To)->$avp($temp2)\n");
> > > >>
> > > >>               if (avp_check("s:caller_speedial", "fm/$temp1/g")) {
> > > >>
> > > >>
> > > >>
> > > >>                       #avp_pushto("$To","i:96");
> > > >>
> > > >>                       #avp_pushto("$ruri","i:97");
> > > >>
> > > >>                       #avp_pushto("$duri","i:97");
> > > >>
> > > >>                       #subst('/^To: (.*)@(.*)/To: "$avp($temp2)"
> > > >><$avp($temp2)@\2/');
> > > >>
> > > >>                       #append_hf("To: \"5615551212\"
> > > >><15615551212 at xx.xx.xx.xx>;user=phone");
> > > >>
> > > >>
> > > >>#subst_uri('/^sip:(.*)@(.*)$/sip:$avp($temp2)@\2/i');
> > > >>
> > > >>                       #subst_user('/(.*)/$avp($temp2)/');
> > > >>
> > > >>                       #remove_hf("To");
> > > >>
> > > >>                       rewriteuser("15615551212");
> > > >>
> > > >>                       xlog("L_N","    SPEEDIALING: $fU is dialing
> > > >>   
> > > >>
> > > >$hdr(To)
> > > > 
> > > >
> > > >>$avp($temp2)\n");
> > > >>
> > > >>                       avp_delete("$temp1/g");
> > > >>
> > > >>                       avp_delete("$temp2/g");
> > > >>
> > > >>
> > > >>
> > > >>               };
> > > >>
> > > >>
> > > >>
> > > >>In this scenario, im forcing it instead of getting the value from AVPs
> > > >>   
> > > >>
> > > >just
> > > > 
> > > >
> > > >>for ease of showing my point. The problem that I'm having is that no
> > > >>   
> > > >>
> > > >matter
> > > > 
> > > >
> > > >>what I do to change the To header or change the R-URI, radius ALWAYS
> > sends
> > > >>the accounting records with the original R-URI, in my case
> > 30 at xx.xx.xx.xx,
> > > >>how can I get acc.so to send the final resulting URI
> > > >>(15615551212 at xx.xx.xx.xx) in the Called-Station-Id AVP?
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
> id=97,
> > > >>length=298
> > > >>
> > > >>       Acct-Status-Type = Start
> > > >>
> > > >>       Service-Type = Sip-Session
> > > >>
> > > >>       Acct-Terminate-Cause = 200
> > > >>
> > > >>       Error-Cause = Invite
> > > >>
> > > >>       User-Name = "1000 at xx.xx.xx.xx"
> > > >>
> > > >>       Calling-Station-Id = "sip:1000 at xx.xx.xx.xx"
> > > >>
> > > >>       Called-Station-Id = "sip:30 at xx.xx.xx.xx;user=phone"
> > > >>
> > > >>       Sip-Translated-Request-URI =
> > > >>"sip:949449852150#15615551212 at gateway;user=phone"
> > > >>
> > > >>       Acct-Session-Id =
> > > >>   
> > > >>
> > > >"000d2890-d47f01e8-1dcc30bc-7a49c7a4 at yy.yy.yy.yy"
> > > > 
> > > >
> > > >>       Sip-To-Tag = "230383F4-2AF"
> > > >>
> > > >>       Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
> > > >>
> > > >>       Sip-CSeq = "102"
> > > >>
> > > >>       NAS-IP-Address = xx.xx.xx.xx
> > > >>
> > > >>       NAS-Port = 5060
> > > >>
> > > >>       Acct-Delay-Time = 0
> > > >>
> > > >>rlm_sql (sql): Reserving sql socket id: 12
> > > >>
> > > >>rlm_sql (sql): Released sql socket id: 12
> > > >>
> > > >>Sending Accounting-Response of id 97 to xx.xx.xx.xx:39216
> > > >>
> > > >>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
> id=98,
> > > >>length=292
> > > >>
> > > >>       Acct-Status-Type = Stop
> > > >>
> > > >>       Service-Type = Sip-Session
> > > >>
> > > >>       Acct-Terminate-Cause = 200
> > > >>
> > > >>       Error-Cause = 8
> > > >>
> > > >>       User-Name = "1000 at xx.xx.xx.xx"
> > > >>
> > > >>       Calling-Station-Id = "sip:1000 at xx.xx.xx.xx"
> > > >>
> > > >>       Called-Station-Id = "sip:30 at xx.xx.xx.xx;user=phone"
> > > >>
> > > >>       Sip-Translated-Request-URI =
> > > >>"sip:949449852150#15615551212 at gateway:5060"
> > > >>
> > > >>       Acct-Session-Id =
> > > >>   
> > > >>
> > > >"000d2890-d47f01e8-1dcc30bc-7a49c7a4 at yy.yy.yy.yy"
> > > > 
> > > >
> > > >>       Sip-To-Tag = "230383F4-2AF"
> > > >>
> > > >>       Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
> > > >>
> > > >>       Sip-CSeq = "103"
> > > >>
> > > >>       NAS-IP-Address = xx.xx.xx.xx
> > > >>
> > > >>       NAS-Port = 5060
> > > >>
> > > >>       Acct-Delay-Time = 0
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>Thanks in advance!
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>Lenir
> > > >>_______________________________________________
> > > >>Users mailing list
> > > >>Users at openser.org
> > > >>http://openser.org/cgi-bin/mailman/listinfo/users
> > > >>
> > > >>   
> > > >>
> > 
> 
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
> 



More information about the Devel mailing list