Thanks a lot, gentelmens! I have jumped to the same conclusion. The only thing I am worried - t_replicate() creates aditional SIP traffic between sers. And I also get some strange error with each REGISTER: 1(712) ERROR: t_newtran: transaction already in process 0x28336768 Don't have any idea what I am doing wrong.... Below is my ser.cfg snippet. As far as you see I am using mediaproxy package to solve NAT issues. I always force relay, cause I had nathelper problems with UAC1->ser->NAT->UAC2 configuration. I am going to test new mediaproxy release. BRs, Tina < BR>> ============================ . . . # ------------------------- request routing logic

# main routing logic route{ #------------------------------------------------------- if (!method=="REGISTER") record_route();

# loose-route processing if (loose_route()) { route(8); #--go to mediaproxy processing break; }; ... if (method=="REGISTER") { #------Replicate to the peers #---Ser 1 if (!src_ip==192.168.25.103) t_replicate("192.168.25.103","5060"); #---Ser 2 if (!src_ip==192.168.25.115) t_replicate("192.168.25.115","5060"); save ("location"); break; }; #-----------------------------------------------INVITE if (method=="INVITE") { log (1, "INVITE: Radius Accounting\n"); t_on_failure("4"); #---voice mail use_media_proxy(); t_on_reply("5"); #--mediaproxy }; #--------------------------------------------------BYE if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL: Radius Accounting\n"); }; #--------------------------------------------------- if (!lookup("location") && !lookup("aliases")) { sl_send_reply("404", "Not Found"); break; }; if (!t_relay()) { sl_reply_error(); }; } #------------------------------------------------------- failure_route[4]{ if (t_check_status("408|486")){ append_hf("P-hint: Rewrited to VM"); rewritehostport("192.168.25.116:5060"); append_branch(); t_relay(); break; }; } #--------------------------------------------------------- onreply_route[5]{ if (status =~ "(183)|2[0-9][0-9]" && !search("^Content-Length:\ 0")) { if ( (!(src_ip=="SERVER1")) && (!(src_ip=="SERVER2")) && (!(src_ip=="SERVER3")) ){ if ( search("c=IN IP4 192.168.*")||search("c=IN IP4 10.*")||search("c=IN IP4 172.16.*") ) { fix_contact(); }; }; use_media_proxy(); } } =================================================== Matt Schulte &lt;mschulte(a)netlogic.net&gt; wrote: I'm starting to lean this direction, using t_replicate and all. I could never get usrloc (db mode) to function properly.. t_replicate is a dirty but very effective workaround. -----Original Message----- From: Greger V. Teigre [mailto:greger@teigre.com] Sent: Saturday, April 02, 2005 1:33 AM To: kramarv(a)yahoo.com Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] still no help - usrloc synchronization Have a look at this thread: http://lists.iptel.org/pipermail/serusers/2005-January/014669.html g-) Java Rockx wrote: & gt; > to work, IMHO. > > Regards, > Paul > > On Apr 1, 2005 4:08 PM, Tina wrote:>> >> Hi, please help me, I'm stuck with it!!!!! >> I am trying to set up several sers with a shared MySQL database for >> location service. >> >> I set in each ser.cfg: >> >> modparam("usrloc", "db_mode", 2) >> modparam("usrloc", >> "db_url","sql://ser:heslo@192.168.25.163/ser") >> >> and the servers are not synchronized. >> The I set >> modparam("usrloc", "db_mode", 2) >> >> >> made UAC (Xlite) register to one of the servers. >> ; I see it via usrloc, but there is no record in "location" mySQL >> table....So others do not see the client and I'm unable to make >> calls.... >> >> >> Please help how to work with usrloc and mySQL... >> >>> software engineer >> >> ________________________________ >> Do you Yahoo!? >> Better first dates. More second dates. Yahoo! Personals >> >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers >> >> >> > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced search. Learn

Thanks a lot, gentelmens! I have jumped to the same conclusion. The only thing I am worried - t_replicate() creates aditional SIP traffic between sers. And I also get some strange error with each REGISTER: 1(712) ERROR: t_newtran: transaction already in process 0x28336768 Don't have any idea what I am doing wrong.... Below is my ser.cfg snippet. As far as you see I am using mediaproxy package to solve NAT issues. I always force relay, cause I had nathelper problems with UAC1->ser->NAT->UAC2 configuration. I am going to test new mediaproxy release. BRs, Tina ! ============================ . . . # ------------------------- request routing logic ------------------- # main routing logic route{ #------------------------------------------------------- if (!method=="REGISTER") record_route(); #-------------------------------------------------------???????????????????? # loose-route processing if (loose_route()) { route(8); #--go to mediaproxy processing break; }; ... if (method=="REGISTER") { #------Replicate to the peers #---Ser 1 if (!src_ip==192.168.25.103) t_replicate("192.168.25.103","5060"); #---Ser 2 if (!src_ip==192.168.25.115) t_replicate("192.168.25.115","5060"); save ("location"); break; }; #-----------------------------------------------INVITE if (method=="INVITE") { log (1, "INVITE: Radius Accounting\n"); t_on_failure("4"); #---voice mail use_media_proxy(); t_on_reply("5"); #--mediaproxy }; #--------------------------------------------------BYE if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL: Radius Accounting\n"); }; #--------------------------------------------------- if (!lookup("location") && !lookup("aliases")) { sl_send_reply("404", "Not Found"); break; }; if (!t_relay()) { sl_reply_error(); }; } #------------------------------------------------------- failure_route[4]{ if (t_check_status("408|486")){ append_hf("P-hint: Rewrited to VM"); rewritehostport("192.168.25.116:5060"); append_branch(); t_relay(); break; }; } #--------------------------------------------------------- onreply_route[5]{ if (status =~ "(183)|2[0-9][0-9]" && !search("^Content-Length:\ 0")) { if ( (!(src_ip=="SERVER1")) && (!(src_ip=="SERVER2")) && (!(src_ip=="SERVER3")) ){ if ( search("c=IN IP4 192.168.*")||search("c=IN IP4 10.*")||search("c=IN IP4 172.16.*") ) { fix_contact(); }; }; use_media_proxy(); } } =================================================== Matt Schulte &lt;mschulte(a)netlogic.net&gt; wrote: I'm starting to lean this direction, using t_replicate and all. I could never get usrloc (db mode) to function properly.. t_replicate is a dirty but very effective workaround. -----Original Message----- From: Greger V. Teigre [mailto:greger@teigre.com] Sent: Saturday, April 02, 2005 1:33 AM To: kramarv(a)yahoo.com Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] still no help - usrloc synchronization Have a look at this thread: http://lists.iptel.org/pipermail/serusers/2005-January/014669.html g-) Java Rockx wrote: ! > > to work, IMHO. > > Regards, > Paul > > On Apr 1, 2005 4:08 PM, Tina wrote:>> >> Hi, please help me, I'm stuck with it!!!!! >> I am trying to set up several sers with a shared MySQL database for >> location service. >> >> I set in each ser.cfg: >> >> modparam("usrloc", "db_mode", 2) >> modparam("usrloc", >> "db_url","sql://ser:heslo@192.168.25.163/ser") >> >> and the servers are not synchronized. >> The I set >> modparam("usrloc", "db_mode", 2) >> >> >> made UAC (Xlite) register to one of the servers. > &g! t; I see it via usrloc, but there is no record in "location" > mySQL >> table....So others do not see the client and I'm unable to make >> calls.... >> >> >> Please help how to work with usrloc and mySQL... >> >>> software engineer >> >> ________________________________ >> Do you Yahoo!? >> Better first dates. More second dates. Yahoo! Personals >> >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers >> >> >> > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced search. Learn more.