Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli.
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
- You will need EPEL.
- You will need the CBR repository or whatever has replaced PowerTools in Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users sr-users@lists.kamailio.org wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools in
Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to
the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools in
Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only
to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Hello Sergey,
Thank you very much for your reply. As you suggested, I will try and update. Thank got.
Best regards, Chandramouli.
On Fri, 12 Sep 2025 at 11:15 PM, Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools
in Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only
to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
*https://pastebin.com/fc54vv9T https://pastebin.com/fc54vv9T*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools
in Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only
to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Pastebin is no available more. Please post again.
On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users sr-users@lists.kamailio.org wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: https://pastebin.com/wi4YtbKZ
Please find the complete error description here: https://pastebin.com/LbgYQMGb
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced
PowerTools in Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users
sr-users@lists.kamailio.org wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as
in Rocky Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to
sr-users-leave@lists.kamailio.org
Important: keep the mailing list in the recipients, do not
reply only to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Hello Sergy,
Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you.
Best regards, Chandramouli.
On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov s.safarov@gmail.com wrote:
Pastebin is no available more. Please post again.
On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
*https://pastebin.com/fc54vv9T https://pastebin.com/fc54vv9T*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools in
Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to
the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Hello Sergy,
Good morning and any help would be appreciated. Thank you.
Best Regards, Chandramouli.
On Mon, Sep 15, 2025 at 9:13 PM Chandramouli P moulicto@gmail.com wrote:
Hello Sergy,
Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you.
Best regards, Chandramouli.
On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov s.safarov@gmail.com wrote:
Pastebin is no available more. Please post again.
On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
*https://pastebin.com/fc54vv9T https://pastebin.com/fc54vv9T*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools in
Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only
to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Use the LTS branch mr12.5. It has the required PIE flags included.
Cheers
On 15/09/2025 11.43, Chandramouli P via sr-users wrote:
Hello Sergy,
Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you.
Best regards, Chandramouli.
On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov s.safarov@gmail.com wrote:
Pastebin is no available more. Please post again. On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:Hello Sergey, Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error: *https://pastebin.com/fc54vv9T* Please advise me to move forward and thank you in advance. Best Regards, Chandramouli. On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov <s.safarov@gmail.com> wrote:Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch. On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users <sr-users@lists.kamailio.org> wrote:Hello Alex, Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors. Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ* Please find the complete error description here: *https://pastebin.com/LbgYQMGb* Please advise me to move forward and thank you in advance. Best Regards, Chandramouli. On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov <abalashov@evaristesys.com> wrote:It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times. Tips: - You will need EPEL. - You will need the CBR repository or whatever has replaced PowerTools in Rocky 8. Otherwise, it's just installing the dependencies until you get there. -- Alex > On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <sr-users@lists.kamailio.org> wrote: > > Hello, > > I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance. > > Best regards, > Chandramouli. > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org > To unsubscribe send an email to sr-users-leave@lists.kamailio.org > Important: keep the mailing list in the recipients, do not reply only to the sender! -- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Kamailio - Users Mailing List - Non Commercial Discussions --sr-users@lists.kamailio.org To unsubscribe send an email tosr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Hello Richard,
Good morning and thank you for your reply. As you suggested, I compiled with mr12.5 and no luck. Please find the attached file for the error log. Please advise me to move forward and thank you in advance.
Best regards, Chandramouli.
On Tue, Sep 16, 2025 at 7:54 PM Richard Fuchs via sr-users < sr-users@lists.kamailio.org> wrote:
Use the LTS branch mr12.5. It has the required PIE flags included.
Cheers
On 15/09/2025 11.43, Chandramouli P via sr-users wrote:
Hello Sergy,
Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you.
Best regards, Chandramouli.
On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov s.safarov@gmail.com wrote:
Pastebin is no available more. Please post again.
On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
*https://pastebin.com/fc54vv9T https://pastebin.com/fc54vv9T*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools in
Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only
to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
You're at least one commit behind the mr12.5 head. Git pull.
On 16/09/2025 13.00, Chandramouli P wrote:
Hello Richard,
Good morning and thank you for your reply. As you suggested, I compiled with mr12.5 and no luck. Please find the attached file for the error log. Please advise me to move forward and thank you in advance.
Best regards, Chandramouli.
On Tue, Sep 16, 2025 at 7:54 PM Richard Fuchs via sr-users sr-users@lists.kamailio.org wrote:
Use the LTS branch mr12.5. It has the required PIE flags included. Cheers On 15/09/2025 11.43, Chandramouli P via sr-users wrote:Hello Sergy, Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you. Best regards, Chandramouli. On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov <s.safarov@gmail.com> wrote: Pastebin is no available more. Please post again. On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:Hello Sergey, Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error: *https://pastebin.com/fc54vv9T* Please advise me to move forward and thank you in advance. Best Regards, Chandramouli. On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov <s.safarov@gmail.com> wrote:Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch. On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users <sr-users@lists.kamailio.org> wrote:Hello Alex, Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors. Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ* Please find the complete error description here: *https://pastebin.com/LbgYQMGb* Please advise me to move forward and thank you in advance. Best Regards, Chandramouli. On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov <abalashov@evaristesys.com> wrote:It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times. Tips: - You will need EPEL. - You will need the CBR repository or whatever has replaced PowerTools in Rocky 8. Otherwise, it's just installing the dependencies until you get there. -- Alex > On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <sr-users@lists.kamailio.org> wrote: > > Hello, > > I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance. > > Best regards, > Chandramouli. > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org > To unsubscribe send an email to sr-users-leave@lists.kamailio.org > Important: keep the mailing list in the recipients, do not reply only to the sender! -- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --sr-users@lists.kamailio.org To unsubscribe send an email tosr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Hello Richard and Sergey,
Good morning and thank you very much for your guidance and help. It seems that my issue is resolved. I am able to compile the kernel module and xt_RTPENGINE.ko file is also created and able to successfully load this module at the boot time. But, I am unable to compile and install the iptables extension. For this, I need to follow the below steps:
cd rtpengine/iptables-extension
make all
cp -fr libxt_RTPENGINE.so /usr/lib64/xtables/.
*Problem:* I wasn't able to find the "iptables-extension" folder in my rtpengine source folder. So, it is giving below error:
[root@rtpengine ~]# systemctl status rtpengine.service
● rtpengine.service - Kernel based rtp proxy
Loaded: loaded (/etc/systemd/system/rtpengine.service; enabled; vendor preset: disabled)
Active: active (running) since Thu 2025-09-18 12:37:28 UTC; 23h ago
*********
********* ERR: [core] FAILED TO CREATE NFTABLES CHAINS OR RULES, KERNEL FORWARDING POSSIBLY WON'T WORK: error returned from netlink for add rule (No such file or directory)
ERR: [core] FAILED TO CREATE KERNEL TABLE 8 (No such file or directory), KERNEL FORWARDING DISABLED
*********
Please advise me to move forward and thank you in advance.
Best regards, Chandramouli.
On Tue, Sep 16, 2025 at 10:36 PM Richard Fuchs rfuchs@sipwise.com wrote:
You're at least one commit behind the mr12.5 head. Git pull.
On 16/09/2025 13.00, Chandramouli P wrote:
Hello Richard,
Good morning and thank you for your reply. As you suggested, I compiled with mr12.5 and no luck. Please find the attached file for the error log. Please advise me to move forward and thank you in advance.
Best regards, Chandramouli.
On Tue, Sep 16, 2025 at 7:54 PM Richard Fuchs via sr-users < sr-users@lists.kamailio.org> wrote:
Use the LTS branch mr12.5. It has the required PIE flags included.
Cheers
On 15/09/2025 11.43, Chandramouli P via sr-users wrote:
Hello Sergy,
Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you.
Best regards, Chandramouli.
On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov s.safarov@gmail.com wrote:
Pastebin is no available more. Please post again.
On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
*https://pastebin.com/fc54vv9T https://pastebin.com/fc54vv9T*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools
in Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only
to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
On 19/09/2025 08.06, Chandramouli P wrote:
*Problem:* I wasn't able to find the "iptables-extension" folder in my rtpengine source folder. So, it is giving below error:
The iptables extension has been obsoleted and removed a while ago and management of the forwarding rules is now done by the service itself through the nftables API. See the related `--nftables-*` command line options.
ERR: [core] FAILED TO CREATE NFTABLES CHAINS OR RULES, KERNEL FORWARDING POSSIBLY WON'T WORK: error returned from netlink for add rule (No such file or directory)
ERR: [core] FAILED TO CREATE KERNEL TABLE 8 (No such file or directory), KERNEL FORWARDING DISABLED
*********
Probably the kernel's nftables module isn't loaded or something. See if loading `nf_tables` makes a difference. Perhaps there are some distro-specific packages you need to install to get nftables support going.
Cheers
Hello Richard,
I have installed RTPProxy and am moving forward with this. Thank you.
Best Regards, Chandramouli.
On Fri, Sep 19, 2025 at 5:52 PM Richard Fuchs rfuchs@sipwise.com wrote:
On 19/09/2025 08.06, Chandramouli P wrote:
*Problem:* I wasn't able to find the "iptables-extension" folder in my rtpengine source folder. So, it is giving below error:
The iptables extension has been obsoleted and removed a while ago and management of the forwarding rules is now done by the service itself through the nftables API. See the related `--nftables-*` command line options.
ERR: [core] FAILED TO CREATE NFTABLES CHAINS OR RULES, KERNELFORWARDING POSSIBLY WON'T WORK: error returned from netlink for add rule (No such file or directory)
ERR: [core] FAILED TO CREATE KERNEL TABLE 8 (No such file ordirectory), KERNEL FORWARDING DISABLED
*********Probably the kernel's nftables module isn't loaded or something. See if loading `nf_tables` makes a difference. Perhaps there are some distro-specific packages you need to install to get nftables support going.
Cheers
Hello Richard,
Thank you for your reply. As you suggested, I tried and had no luck. Please find the attached file for error log information. I can't see any errors. But, I couldn't able to see rtpengine.conf file in the VM. Am I missing something? Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Tue, Sep 16, 2025 at 7:54 PM Richard Fuchs via sr-users < sr-users@lists.kamailio.org> wrote:
Use the LTS branch mr12.5. It has the required PIE flags included.
Cheers
On 15/09/2025 11.43, Chandramouli P via sr-users wrote:
Hello Sergy,
Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you.
Best regards, Chandramouli.
On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov s.safarov@gmail.com wrote:
Pastebin is no available more. Please post again.
On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
*https://pastebin.com/fc54vv9T https://pastebin.com/fc54vv9T*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools in
Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only
to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Hello Richard,
I am sorry. I think that I need to do all these manually. Right? Thank you.
Best regards, Chandramouli.
On Tue, Sep 16, 2025 at 11:14 PM Chandramouli P moulicto@gmail.com wrote:
Hello Richard,
Thank you for your reply. As you suggested, I tried and had no luck. Please find the attached file for error log information. I can't see any errors. But, I couldn't able to see rtpengine.conf file in the VM. Am I missing something? Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Tue, Sep 16, 2025 at 7:54 PM Richard Fuchs via sr-users < sr-users@lists.kamailio.org> wrote:
Use the LTS branch mr12.5. It has the required PIE flags included.
Cheers
On 15/09/2025 11.43, Chandramouli P via sr-users wrote:
Hello Sergy,
Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you.
Best regards, Chandramouli.
On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov s.safarov@gmail.com wrote:
Pastebin is no available more. Please post again.
On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
*https://pastebin.com/fc54vv9T https://pastebin.com/fc54vv9T*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools
in Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only
to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
In log present
/usr/bin/ld: dynamic STT_GNU_IFUNC symbol `s16_mix_in.lto_priv.222'
with pointer equality in `/tmp/cc3IdiIR.ltrans2.ltrans.o' can not be used when making an executable; recompile with -fPIE and relink with - pie
Important here recompile with -fPIE and relink with -pie
For you dist need to update SPEC file and add options "-fPIE" got compiles (gcc) and "-pie" for linker.
Sergey
On Mon, 2025-09-15 at 21:13 +0530, Chandramouli P wrote:
Hello Sergy,
Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you.
Best regards, Chandramouli.
On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov s.safarov@gmail.com wrote:
Pastebin is no available more. Please post again.
On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users sr-users@lists.kamailio.org wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: https://pastebin.com/wi4YtbKZ
Please find the complete error description here: https://pastebin.com/LbgYQMGb
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced
PowerTools in Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
> On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users sr-users@lists.kamailio.org wrote: > > Hello, > > I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance. > > Best regards, > Chandramouli. > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org > To unsubscribe send an email to sr-users-leave@lists.kamailio.org > Important: keep the mailing list in the recipients, do not reply only to the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I compiled with different options and no luck. But, what I believe is, I am missing something here. As you said (need to update SPEC file and add options "-fPIE" got compiles (gcc) and "-pie" for linker), could you please tell me which file I need to update and compile commands?
Please find the below commands that I executed:
make -fPIE and then make -pie
make -fPIE -pie
Thank you in advance.
Best Regards, Chandramouli.
On Tue, Sep 16, 2025 at 8:23 PM Sergei Safarov s.safarov@gmail.com wrote:
In log present
/usr/bin/ld: dynamic STT_GNU_IFUNC symbol `s16_mix_in.lto_priv.222' with
pointer equality in `/tmp/cc3IdiIR.ltrans2.ltrans.o' can not be used when making an executable; recompile with -fPIE and relink with -pie
Important here recompile with -fPIE and relink with -pie
For you dist need to update SPEC file and add options "-fPIE" got compiles (gcc) and "-pie" for linker.
Sergey
On Mon, 2025-09-15 at 21:13 +0530, Chandramouli P wrote:
Hello Sergy,
Good morning and thank you for your reply. Somehow, I wasn't able to login to my pastebin account. Please find the error that I am getting in the attached file. Thank you.
Best regards, Chandramouli.
On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov s.safarov@gmail.com wrote:
Pastebin is no available more. Please post again.
On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
Hello Sergey,
Good morning and thank you for your reply. As you suggested, I tried to compile the mr12.4 version and getting the below error:
*https://pastebin.com/fc54vv9T https://pastebin.com/fc54vv9T*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov s.safarov@gmail.com wrote:
Looks like you're trying to build the master branch I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on CentOS 8 Probably this should also work for Rocky 8 After you compile this branch, you can build for a more recent branch.
On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users < sr-users@lists.kamailio.org> wrote:
Hello Alex,
Good morning and thank you for your reply. As you suggested, I followed and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting errors.
Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ https://pastebin.com/wi4YtbKZ*
Please find the complete error description here: *https://pastebin.com/LbgYQMGb https://pastebin.com/LbgYQMGb*
Please advise me to move forward and thank you in advance.
Best Regards, Chandramouli.
On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov abalashov@evaristesys.com wrote:
It would be hard to share a step-by-step guide as I don't have one handy and it would be labourious to set up a fresh host for the express purpose of writing one for you, but I do this routinely on EL8 and Rocky 8, and have done so dozens of times.
Tips:
You will need EPEL.
You will need the CBR repository or whatever has replaced PowerTools in
Rocky 8.
Otherwise, it's just installing the dependencies until you get there.
-- Alex
On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
sr-users@lists.kamailio.org> wrote:
Hello,
I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
Linux 8.x also using different sources. But, I am facing a lot of issues like libraries issues, dependencies issues, conflict issues etc. Anyone successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on CentOS)? If so, could you please share the documentation step-by-step or web URL? Thanks in advance.
Best regards, Chandramouli. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to
the sender!
-- Alex Balashov Principal Consultant Evariste Systems LLC Web: https://evaristesys.com, https://www.csrpswitch.com Tel: +1-706-510-6800
Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
-
Alex Balashov -
Chandramouli P -
Richard Fuchs -
Sergei Safarov -
Sergey Safarov