I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here: https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-ap... I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. How could i integrate freeswitch to my system please?
It’s hard to make suggestions without knowing what errors you were having.
-- Fred direct/sms +1 (336) 439-3733
On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com wrote:
I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here: https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-ap... I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. How could i integrate freeswitch to my system please?
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Happy new year.
Since the system got unusable from the tries, i had to reinstall Debian 9 x64bit and i tried to make it one step at a time. Kamailio is installed and the users 100 and 101 can call each other and have payload. Once the Freeswitch is installed and the config is made to the xml files, the users just register to Kamailio, but *cannot *call each other. Once, this is sorted then i will proceed with the Siremis installation & configuration. I am attaching the /etc/kamailio and /etc/freeswitch files
Thanks in advance John
On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com wrote:
It’s hard to make suggestions without knowing what errors you were having.
-- Fred direct/sms +1 (336) 439-3733
On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com wrote:
I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here:
https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-ap... I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. How could i integrate freeswitch to my system please?
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Don’t get me wrong, but what’s the point of registering on kamailio AND freeswitch? What’s the end use? You may not need to register on both, and you may not even need fs for rtp relay.
On Fri, 3 Jan 2020 at 12:34, John Tuxies atuxnull@gmail.com wrote:
Happy new year.
Since the system got unusable from the tries, i had to reinstall Debian 9 x64bit and i tried to make it one step at a time. Kamailio is installed and the users 100 and 101 can call each other and have payload. Once the Freeswitch is installed and the config is made to the xml files, the users just register to Kamailio, but *cannot *call each other. Once, this is sorted then i will proceed with the Siremis installation & configuration. I am attaching the /etc/kamailio and /etc/freeswitch files
Thanks in advance John
On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com wrote:
It’s hard to make suggestions without knowing what errors you were having.
-- Fred direct/sms +1 (336) 439-3733
On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com wrote:
I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here:
https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-ap... I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. How could i integrate freeswitch to my system please?
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi David, thanks for the reply.
I do not know much and i am trying my baby steps following guides. I have followed the guide from kamailio on how to integrate it with Freeswitch. All i want is a single machine or vm with kamailio and freeswitch. General sip calling and registration will be handled by kamailio itself. All other services such as ivr, conference, voicemail etc will be handled by freeswitch. I would appreciate any help available, please.
On Friday, January 3, 2020, David Villasmil david.villasmil.work@gmail.com wrote:
Don’t get me wrong, but what’s the point of registering on kamailio AND freeswitch? What’s the end use? You may not need to register on both, and you may not even need fs for rtp relay.
On Fri, 3 Jan 2020 at 12:34, John Tuxies atuxnull@gmail.com wrote:
Happy new year.
Since the system got unusable from the tries, i had to reinstall Debian 9 x64bit and i tried to make it one step at a time. Kamailio is installed and the users 100 and 101 can call each other and have payload. Once the Freeswitch is installed and the config is made to the xml files, the users just register to Kamailio, but *cannot *call each other. Once, this is sorted then i will proceed with the Siremis installation & configuration. I am attaching the /etc/kamailio and /etc/freeswitch files
Thanks in advance John
On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com wrote:
It’s hard to make suggestions without knowing what errors you were having.
-- Fred direct/sms +1 (336) 439-3733
On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com wrote:
I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here: https://www.powerpbx.org/content/kamailio-v5-siremis- v5-debian-v9-mariadb-apache-v1 I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x- freeswitch-1.0.6d-sbc But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. How could i integrate freeswitch to my system please?
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
I understand, that’s a good way to start off. What guide are you following?
On Sat, 4 Jan 2020 at 09:44, John Tuxies atuxnull@gmail.com wrote:
Hi David, thanks for the reply.
I do not know much and i am trying my baby steps following guides. I have followed the guide from kamailio on how to integrate it with Freeswitch. All i want is a single machine or vm with kamailio and freeswitch. General sip calling and registration will be handled by kamailio itself. All other services such as ivr, conference, voicemail etc will be handled by freeswitch. I would appreciate any help available, please.
On Friday, January 3, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
Don’t get me wrong, but what’s the point of registering on kamailio AND freeswitch? What’s the end use? You may not need to register on both, and you may not even need fs for rtp relay.
On Fri, 3 Jan 2020 at 12:34, John Tuxies atuxnull@gmail.com wrote:
Happy new year.
Since the system got unusable from the tries, i had to reinstall Debian 9 x64bit and i tried to make it one step at a time. Kamailio is installed and the users 100 and 101 can call each other and have payload. Once the Freeswitch is installed and the config is made to the xml files, the users just register to Kamailio, but *cannot *call each other. Once, this is sorted then i will proceed with the Siremis installation & configuration. I am attaching the /etc/kamailio and /etc/freeswitch files
Thanks in advance John
On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com wrote:
It’s hard to make suggestions without knowing what errors you were having.
-- Fred direct/sms +1 (336) 439-3733
On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com wrote:
I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here:
https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-ap... I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. How could i integrate freeswitch to my system please?
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
I have followed this guide https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc My system is a virtual machine Debian 9 x64bit. The file that i attached was the Kamailio and Freeswitch folders under /etc
On Saturday, January 4, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
I understand, that’s a good way to start off. What guide are you following?
On Sat, 4 Jan 2020 at 09:44, John Tuxies atuxnull@gmail.com wrote:
Hi David, thanks for the reply.
I do not know much and i am trying my baby steps following guides. I have followed the guide from kamailio on how to integrate it with Freeswitch. All i want is a single machine or vm with kamailio and freeswitch. General sip calling and registration will be handled by kamailio itself. All other services such as ivr, conference, voicemail etc will be handled by freeswitch. I would appreciate any help available, please.
On Friday, January 3, 2020, David Villasmil <david.villasmil.work@gmail. com> wrote:
Don’t get me wrong, but what’s the point of registering on kamailio AND freeswitch? What’s the end use? You may not need to register on both, and you may not even need fs for rtp relay.
On Fri, 3 Jan 2020 at 12:34, John Tuxies atuxnull@gmail.com wrote:
Happy new year.
Since the system got unusable from the tries, i had to reinstall Debian 9 x64bit and i tried to make it one step at a time. Kamailio is installed and the users 100 and 101 can call each other and have payload. Once the Freeswitch is installed and the config is made to the xml files, the users just register to Kamailio, but *cannot *call each other. Once, this is sorted then i will proceed with the Siremis installation & configuration. I am attaching the /etc/kamailio and /etc/freeswitch files
Thanks in advance John
On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com wrote:
It’s hard to make suggestions without knowing what errors you were having.
-- Fred direct/sms +1 (336) 439-3733
On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com wrote:
I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here: https://www.powerpbx.org/content/kamailio-v5-siremis- v5-debian-v9-mariadb-apache-v1 I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x- freeswitch-1.0.6d-sbc But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. How could i integrate freeswitch to my system please?
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Ok just checked it out. It’s pretty old, but should still work. Can you paste kamailio’s and freeswitch logs when one user is trying to call the other? There should be no authentication on the freeswitch side. It should blindly forward to kamailio.
On Sat, 4 Jan 2020 at 13:34, John Tuxies atuxnull@gmail.com wrote:
I have followed this guide https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc My system is a virtual machine Debian 9 x64bit. The file that i attached was the Kamailio and Freeswitch folders under /etc
On Saturday, January 4, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
I understand, that’s a good way to start off. What guide are you following?
On Sat, 4 Jan 2020 at 09:44, John Tuxies atuxnull@gmail.com wrote:
Hi David, thanks for the reply.
I do not know much and i am trying my baby steps following guides. I have followed the guide from kamailio on how to integrate it with Freeswitch. All i want is a single machine or vm with kamailio and freeswitch. General sip calling and registration will be handled by kamailio itself. All other services such as ivr, conference, voicemail etc will be handled by freeswitch. I would appreciate any help available, please.
On Friday, January 3, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
Don’t get me wrong, but what’s the point of registering on kamailio AND freeswitch? What’s the end use? You may not need to register on both, and you may not even need fs for rtp relay.
On Fri, 3 Jan 2020 at 12:34, John Tuxies atuxnull@gmail.com wrote:
Happy new year.
Since the system got unusable from the tries, i had to reinstall Debian 9 x64bit and i tried to make it one step at a time. Kamailio is installed and the users 100 and 101 can call each other and have payload. Once the Freeswitch is installed and the config is made to the xml files, the users just register to Kamailio, but *cannot *call each other. Once, this is sorted then i will proceed with the Siremis installation & configuration. I am attaching the /etc/kamailio and /etc/freeswitch files
Thanks in advance John
On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com wrote:
It’s hard to make suggestions without knowing what errors you were having.
-- Fred direct/sms +1 (336) 439-3733
On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com wrote:
I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here:
https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-ap... I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. How could i integrate freeswitch to my system please?
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
In Freeswitch i check registrations in the console (fs_cli), correct? What about kamailio?
On Saturday, January 4, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
Ok just checked it out. It’s pretty old, but should still work. Can you paste kamailio’s and freeswitch logs when one user is trying to call the other? There should be no authentication on the freeswitch side. It should blindly forward to kamailio.
On Sat, 4 Jan 2020 at 13:34, John Tuxies atuxnull@gmail.com wrote:
I have followed this guide https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc My system is a virtual machine Debian 9 x64bit. The file that i attached was the Kamailio and Freeswitch folders under /etc
On Saturday, January 4, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
I understand, that’s a good way to start off. What guide are you following?
On Sat, 4 Jan 2020 at 09:44, John Tuxies atuxnull@gmail.com wrote:
Hi David, thanks for the reply.
I do not know much and i am trying my baby steps following guides. I have followed the guide from kamailio on how to integrate it with Freeswitch. All i want is a single machine or vm with kamailio and freeswitch. General sip calling and registration will be handled by kamailio itself. All other services such as ivr, conference, voicemail etc will be handled by freeswitch. I would appreciate any help available, please.
On Friday, January 3, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
Don’t get me wrong, but what’s the point of registering on kamailio AND freeswitch? What’s the end use? You may not need to register on both, and you may not even need fs for rtp relay.
On Fri, 3 Jan 2020 at 12:34, John Tuxies atuxnull@gmail.com wrote:
Happy new year.
Since the system got unusable from the tries, i had to reinstall Debian 9 x64bit and i tried to make it one step at a time. Kamailio is installed and the users 100 and 101 can call each other and have payload. Once the Freeswitch is installed and the config is made to the xml files, the users just register to Kamailio, but *cannot *call each other. Once, this is sorted then i will proceed with the Siremis installation & configuration. I am attaching the /etc/kamailio and /etc/freeswitch files
Thanks in advance John
On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com wrote:
> It’s hard to make suggestions without knowing what errors you were > having. > > -- Fred > direct/sms +1 (336) 439-3733 > > > On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com wrote: > > I have a Debian server running Kamailio and i have all my users > regiatering and talking to each other. I do create/remove users from > Siremis. I have followed the guide from here: > https://www.powerpbx.org/content/kamailio-v5-siremis- > v5-debian-v9-mariadb-apache-v1 > I would like to add freeswitch to the same server and add > conference, voicemail, supplementary services for my users. > I have given it a try to install freeswitch and tried to configure > it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x- > freeswitch-1.0.6d-sbc > But.now the Siremis gui shows a lot of errors and i cannot login any > more. Since it is a Virtual machine i reverted it back and it works > without freeswitch. > How could i integrate freeswitch to my system please? > > > > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users@lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users@lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
You can do that in Kamailio too, using the CLI tools that interface with the internal RPC system, such as kamcli/kamcmd, or via the JSONRPC interface. Or if you use database backing, you can just query the location table in the underlying database.
— Sent from mobile, with due apologies for brevity and errors.
On Jan 4, 2020, at 2:18 PM, John Tuxies atuxnull@gmail.com wrote:
In Freeswitch i check registrations in the console (fs_cli), correct? What about kamailio?
On Saturday, January 4, 2020, David Villasmil david.villasmil.work@gmail.com wrote: Ok just checked it out. It’s pretty old, but should still work. Can you paste kamailio’s and freeswitch logs when one user is trying to call the other? There should be no authentication on the freeswitch side. It should blindly forward to kamailio.
On Sat, 4 Jan 2020 at 13:34, John Tuxies atuxnull@gmail.com wrote: I have followed this guide https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc My system is a virtual machine Debian 9 x64bit. The file that i attached was the Kamailio and Freeswitch folders under /etc
On Saturday, January 4, 2020, David Villasmil david.villasmil.work@gmail.com wrote: I understand, that’s a good way to start off. What guide are you following?
On Sat, 4 Jan 2020 at 09:44, John Tuxies atuxnull@gmail.com wrote: Hi David, thanks for the reply.
I do not know much and i am trying my baby steps following guides. I have followed the guide from kamailio on how to integrate it with Freeswitch. All i want is a single machine or vm with kamailio and freeswitch. General sip calling and registration will be handled by kamailio itself. All other services such as ivr, conference, voicemail etc will be handled by freeswitch. I would appreciate any help available, please.
On Friday, January 3, 2020, David Villasmil david.villasmil.work@gmail.com wrote: Don’t get me wrong, but what’s the point of registering on kamailio AND freeswitch? What’s the end use? You may not need to register on both, and you may not even need fs for rtp relay.
> On Fri, 3 Jan 2020 at 12:34, John Tuxies atuxnull@gmail.com wrote: > Happy new year. > > Since the system got unusable from the tries, i had to reinstall Debian 9 x64bit and i tried to make it one step at a time. Kamailio is installed and the users 100 and 101 can call each other and have payload. > Once the Freeswitch is installed and the config is made to the xml files, the users just register to Kamailio, but cannot call each other. > Once, this is sorted then i will proceed with the Siremis installation & configuration. > I am attaching the /etc/kamailio and /etc/freeswitch files > > Thanks in advance > John > >> On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com wrote: >> It’s hard to make suggestions without knowing what errors you were having. >> >> -- Fred >> direct/sms +1 (336) 439-3733 >> >> >>>> On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com wrote: >>>> >>> I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here: >>> https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-ap... >>> I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. >>> I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc >>> But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. >>> How could i integrate freeswitch to my system please? >>> >>> >>> >>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> sr-users@lists.kamailio.org >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users@lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
We won’t be able to see much without logs.
There should be no registrations on freeswitch.
On Sat, 4 Jan 2020 at 20:19, John Tuxies atuxnull@gmail.com wrote:
In Freeswitch i check registrations in the console (fs_cli), correct? What about kamailio?
On Saturday, January 4, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
Ok just checked it out. It’s pretty old, but should still work. Can you paste kamailio’s and freeswitch logs when one user is trying to call the other? There should be no authentication on the freeswitch side. It should blindly forward to kamailio.
On Sat, 4 Jan 2020 at 13:34, John Tuxies atuxnull@gmail.com wrote:
I have followed this guide https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc My system is a virtual machine Debian 9 x64bit. The file that i attached was the Kamailio and Freeswitch folders under /etc
On Saturday, January 4, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
I understand, that’s a good way to start off. What guide are you following?
On Sat, 4 Jan 2020 at 09:44, John Tuxies atuxnull@gmail.com wrote:
Hi David, thanks for the reply.
I do not know much and i am trying my baby steps following guides. I have followed the guide from kamailio on how to integrate it with Freeswitch. All i want is a single machine or vm with kamailio and freeswitch. General sip calling and registration will be handled by kamailio itself. All other services such as ivr, conference, voicemail etc will be handled by freeswitch. I would appreciate any help available, please.
On Friday, January 3, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
Don’t get me wrong, but what’s the point of registering on kamailio AND freeswitch? What’s the end use? You may not need to register on both, and you may not even need fs for rtp relay.
On Fri, 3 Jan 2020 at 12:34, John Tuxies atuxnull@gmail.com wrote:
> Happy new year. > > Since the system got unusable from the tries, i had to reinstall > Debian 9 x64bit and i tried to make it one step at a time. Kamailio is > installed and the users 100 and 101 can call each other and have payload. > Once the Freeswitch is installed and the config is made to the xml > files, the users just register to Kamailio, but *cannot *call each > other. > Once, this is sorted then i will proceed with the Siremis > installation & configuration. > I am attaching the /etc/kamailio and /etc/freeswitch files > > Thanks in advance > John > > On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com > wrote: > >> It’s hard to make suggestions without knowing what errors you were >> having. >> >> -- Fred >> direct/sms +1 (336) 439-3733 >> >> >> On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com >> wrote: >> >> I have a Debian server running Kamailio and i have all my users >> regiatering and talking to each other. I do create/remove users from >> Siremis. I have followed the guide from here: >> >> https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-ap... >> I would like to add freeswitch to the same server and add >> conference, voicemail, supplementary services for my users. >> I have given it a try to install freeswitch and tried to configure >> it accordingly to >> https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc >> But.now the Siremis gui shows a lot of errors and i cannot login >> any more. Since it is a Virtual machine i reverted it back and it works >> without freeswitch. >> How could i integrate freeswitch to my system please? >> >> >> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users@lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users@lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users@lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
I have only 2 users provisioned 100 and 101. Here is the output from the Kamailio query
*root@deb9base: ~ $ kamctl ul show{ "jsonrpc": "2.0", "result": { "Domains": [{ "Domain": { "Domain": "location", "Size": 1024, "AoRs": [{ "Info": { "AoR": "100", "HashID": 3612368, "Contacts": [{ "Contact": { "Address": "sip:100@192.168.1.7:63277;ob", "Expires": 272, "Q": -1, "Call-ID": "1ffd5baa079b465eb2a58278fd1458a7", "CSeq": 57791, "User-Agent": "MicroSIP/3.19.22", "Received": "[not set]", "Path": "[not set]", "State": "CS_SYNC", "Flags": 0, "CFlags": 0, "Socket": "udp:192.168.1.19:5060 http://192.168.1.19:5060", "Methods": 8159, "Ruid": "uloc-5e142b1f-2c5-2", "Instance": "[not set]", "Reg-Id": 0, "Server-Id": 0, "Tcpconn-Id": -1, "Keepalive": 0, "Last-Keepalive": 1578380116, "Last-Modified": 1578380116 } }] } }, { "Info": { "AoR": "101", "HashID": 3612369, "Contacts": [{ "Contact": { "Address": "sip:101@192.168.1.8:5060;ob", "Expires": 292, "Q": -1, "Call-ID": "eb07a576837b4c92ab5df8be0fc6db16", "CSeq": 24654, "User-Agent": "MicroSIP/3.19.22", "Received": "[not set]", "Path": "[not set]", "State": "CS_NEW", "Flags": 0, "CFlags": 0, "Socket": "udp:192.168.1.19:5060 http://192.168.1.19:5060", "Methods": 8159, "Ruid": "uloc-5e142b1f-2c8-1", "Instance": "[not set]", "Reg-Id": 0, "Server-Id": 0, "Tcpconn-Id": -1, "Keepalive": 0, "Last-Keepalive": 1578380136, "Last-Modified": 1578380136 } }] } } ], "Stats": { "Records": 2, "Max-Slots": 1 } } }] }, "id": 879}root@deb9base: ~ *
Here is the output from the Freeswitch's query
*freeswitch@deb9base> show registrations0 total.freeswitch@deb9base>*
I am placing a call from 100 to 101. 101 does not ring and on the 100's display it says temporarily unavailable. The log from freeswitch is:
*2020-01-07 08:58:59.843523 [NOTICE] switch_channel.c:1118 New Channel sofia/internal/100@192.168.1.19 100@192.168.1.19 [cdedc9ce-7fcd-47b4-aeaa-2d793b5df934]2020-01-07 08:58:59.843523 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_NEW (Cur 1 Tot 1)2020-01-07 08:58:59.843523 [DEBUG] sofia.c:10255 sofia/internal/100@192.168.1.19 100@192.168.1.19 receiving invite from 192.168.1.19:5060 http://192.168.1.19:5060 version: 1.10.2 -release-13-f7bdd3845a 64bit2020-01-07 08:58:59.843523 [DEBUG] sofia.c:10349 verifying acl "domains" for ip/port 192.168.1.19:0 http://192.168.1.19:0.2020-01-07 08:58:59.843523 [DEBUG] sofia.c:10378 IP 192.168.1.19 Approved by acl "domains[]". Access Granted.2020-01-07 08:58:59.863516 [DEBUG] sofia.c:7301 Channel sofia/internal/100@192.168.1.19 100@192.168.1.19 entering state [received][100]2020-01-07 08:58:59.863516 [DEBUG] sofia.c:7311 Remote SDP:v=0o=- 3787376335 3787376335 IN IP4 192.168.1.7s=pjmediab=AS:84t=0 0a=X-nat:0m=audio 4000 RTP/AVP 8 0 101c=IN IP4 192.168.1.7b=TIAS:64000a=rtpmap:8 PCMA/8000a=rtpmap:0 PCMU/8000a=rtpmap:101 telephone-event/8000a=fmtp:101 0-16a=rtcp:4001 IN IP4 192.168.1.7a=ssrc:416371233 cname:42603bfe516775ce2020-01-07 08:58:59.863516 [DEBUG] sofia.c:7714 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State Change CS_NEW -> CS_INIT2020-01-07 08:58:59.863516 [DEBUG] switch_core_state_machine.c:604 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State NEW2020-01-07 08:58:59.863516 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_INIT (Cur 1 Tot 1)2020-01-07 08:58:59.863516 [DEBUG] switch_core_state_machine.c:628 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State INIT2020-01-07 08:58:59.883518 [DEBUG] mod_sofia.c:93 sofia/internal/100@192.168.1.19 100@192.168.1.19 SOFIA INIT2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:40 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard INIT2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:48 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State Change CS_INIT -> CS_ROUTING2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:628 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State INIT going to sleep2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_ROUTING (Cur 1 Tot 1)2020-01-07 08:58:59.883518 [DEBUG] switch_channel.c:2332 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Callstate Change DOWN -> RINGING2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:644 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State ROUTING2020-01-07 08:58:59.883518 [DEBUG] mod_sofia.c:154 sofia/internal/100@192.168.1.19 100@192.168.1.19 SOFIA ROUTING2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:236 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard ROUTING2020-01-07 08:58:59.883518 [INFO] mod_dialplan_xml.c:637 Processing 100 <100>->kb-101 in context publicDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [public->unloop] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [unloop] ${unroll_loops}(true) =~ /^true$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [unloop] ${sip_looped_call}() =~ /^true$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [public->outside_call] continue=trueDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Absolute Condition [outside_call]Dialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Action set(outside_call=true)Dialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Action export(RFC2822_DATE=${strftime(%a, %d %b %Y %T %z)})Dialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [public->call_debug] continue=trueDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [call_debug] ${call_debug}(false) =~ /^true$/ break=neverDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [public->public_extensions] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [public_extensions] destination_number(kb-101) =~ /^(10[01][0-9])$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [public->public_conference_extensions] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [public_conference_extensions] destination_number(kb-101) =~ /^(3[5-8][01][0-9])$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [public->from_kamailio] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [from_kamailio] network_addr(192.168.1.19) =~ /^192.168.1.19$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [from_kamailio] destination_number(kb-101) =~ /^(.+)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Action transfer(kb-101 XML default)2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:287 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State Change CS_ROUTING -> CS_EXECUTE2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:644 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State ROUTING going to sleep2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_EXECUTE (Cur 1 Tot 1)2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:651 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State EXECUTE2020-01-07 08:58:59.883518 [DEBUG] mod_sofia.c:209 sofia/internal/100@192.168.1.19 100@192.168.1.19 SOFIA EXECUTE2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:329 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard EXECUTEEXECUTE [depth=0] sofia/internal/100@192.168.1.19 100@192.168.1.19 set(outside_call=true)2020-01-07 08:58:59.883518 [DEBUG] mod_dptools.c:1672 SET sofia/internal/100@192.168.1.19 100@192.168.1.19 [outside_call]=[true]EXECUTE [depth=0] sofia/internal/100@192.168.1.19 100@192.168.1.19 export(RFC2822_DATE=Tue, 07 Jan 2020 08:58:59 +0200)2020-01-07 08:58:59.883518 [DEBUG] switch_channel.c:1310 EXPORT (export_vars) [RFC2822_DATE]=[Tue, 07 Jan 2020 08:58:59 +0200]EXECUTE [depth=0] sofia/internal/100@192.168.1.19 100@192.168.1.19 transfer(kb-101 XML default)2020-01-07 08:58:59.883518 [DEBUG] switch_ivr.c:2231 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State Change CS_EXECUTE -> CS_ROUTING2020-01-07 08:58:59.883518 [NOTICE] switch_ivr.c:2238 Transfer sofia/internal/100@192.168.1.19 100@192.168.1.19 to XML[kb-101@default]2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:651 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State EXECUTE going to sleep2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_ROUTING (Cur 1 Tot 1)2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:644 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State ROUTING2020-01-07 08:58:59.883518 [DEBUG] mod_sofia.c:145 Call appears to be already acknowledged2020-01-07 08:58:59.883518 [DEBUG] mod_sofia.c:154 sofia/internal/100@192.168.1.19 100@192.168.1.19 SOFIA ROUTING2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:236 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard ROUTING2020-01-07 08:58:59.883518 [INFO] mod_dialplan_xml.c:637 Processing 100 <100>->kb-101 in context defaultDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->unloop] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [unloop] ${unroll_loops}(true) =~ /^true$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [unloop] ${sip_looped_call}() =~ /^true$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->tod_example] continue=trueDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Date/TimeMatch (FAIL) [tod_example] break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->holiday_example] continue=trueDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Date/TimeMatch (FAIL) [holiday_example] break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->global-intercept] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [global-intercept] destination_number(kb-101) =~ /^886$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->group-intercept] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [group-intercept] destination_number(kb-101) =~ /^*8$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->intercept-ext] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [intercept-ext] destination_number(kb-101) =~ /^**(\d+)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->redial] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [redial] destination_number(kb-101) =~ /^(redial|870)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->global] continue=trueDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [global] ${call_debug}(false) =~ /^true$/ break=neverDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [global] ${default_password}(147852) =~ /^1234$/ break=neverDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [global] ${rtp_has_crypto}() =~ /^(AEAD_AES_256_GCM_8|AEAD_AES_128_GCM_8|AES_CM_256_HMAC_SHA1_80|AES_CM_192_HMAC_SHA1_80|AES_CM_128_HMAC_SHA1_80|AES_CM_256_HMAC_SHA1_32|AES_CM_192_HMAC_SHA1_32|AES_CM_128_HMAC_SHA1_32|AES_CM_128_NULL_AUTH)$/ break=neverDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [global] ${endpoint_disposition}(DELAYED NEGOTIATION) =~ /^(DELAYED NEGOTIATION)/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [global] ${switch_r_sdp}(v=0o=- 3787376335 3787376335 IN IP4 192.168.1.7s=pjmediab=AS:84t=0 0a=X-nat:0m=audio 4000 RTP/AVP 8 0 101c=IN IP4 192.168.1.7b=TIAS:64000a=rtpmap:8 PCMA/8000a=rtpmap:0 PCMU/8000a=rtpmap:101 telephone-event/8000a=fmtp:101 0-16a=rtcp:4001 IN IP4 192.168.1.7a=ssrc:416371233 cname:42603bfe516775ce) =~ /(AES_CM_128_HMAC_SHA1_32|AES_CM_128_HMAC_SHA1_80)/ break=neverDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Absolute Condition [global]Dialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Action hash(insert/${domain_name}-spymap/${caller_id_number}/${uuid})Dialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Action hash(insert/${domain_name}-last_dial/${caller_id_number}/${destination_number})Dialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Action hash(insert/${domain_name}-last_dial/global/${uuid})Dialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Action export(RFC2822_DATE=${strftime(%a, %d %b %Y %T %z)})Dialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->snom-demo-2] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [snom-demo-2] destination_number(kb-101) =~ /^9001$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->snom-demo-1] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [snom-demo-1] destination_number(kb-101) =~ /^9000$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->eavesdrop] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [eavesdrop] destination_number(kb-101) =~ /^88(\d{4})$|^*0(.*)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->eavesdrop] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [eavesdrop] destination_number(kb-101) =~ /^779$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->call_return] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [call_return] destination_number(kb-101) =~ /^*69$|^869$|^lcr$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->del-group] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [del-group] destination_number(kb-101) =~ /^80(\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->add-group] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [add-group] destination_number(kb-101) =~ /^81(\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->call-group-simo] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [call-group-simo] destination_number(kb-101) =~ /^82(\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->call-group-order] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [call-group-order] destination_number(kb-101) =~ /^83(\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->extension-intercom] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [extension-intercom] destination_number(kb-101) =~ /^8(10[01][0-9])$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->Local_Extension] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [Local_Extension] destination_number(kb-101) =~ /^(10[01][0-9])$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->Local_Extension_Skinny] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [Local_Extension_Skinny] destination_number(kb-101) =~ /^(11[01][0-9])$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->group_dial_sales] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [group_dial_sales] destination_number(kb-101) =~ /^2000$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->group_dial_support] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [group_dial_support] destination_number(kb-101) =~ /^2001$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->group_dial_billing] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [group_dial_billing] destination_number(kb-101) =~ /^2002$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->operator] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [operator] destination_number(kb-101) =~ /^(operator|0)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->vmain] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [vmain] destination_number(kb-101) =~ /^vmain$|^4000$|^*98$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->sip_uri] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [sip_uri] destination_number(kb-101) =~ /^sip:(.*)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->nb_conferences] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [nb_conferences] destination_number(kb-101) =~ /^(30\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->wb_conferences] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [wb_conferences] destination_number(kb-101) =~ /^(31\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->uwb_conferences] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [uwb_conferences] destination_number(kb-101) =~ /^(32\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->cdquality_conferences] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [cdquality_conferences] destination_number(kb-101) =~ /^(33\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->cdquality_stereo_conferences] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [cdquality_stereo_conferences] destination_number(kb-101) =~ /^(35\d{2}).*?-screen$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->conference-canvases] continue=trueDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [conference-canvases] destination_number(kb-101) =~ /(35\d{2})-canvas-(\d+)/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->conf mod] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [conf mod] destination_number(kb-101) =~ /^6070-moderator$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->cdquality_conferences] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [cdquality_conferences] destination_number(kb-101) =~ /^(35\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->cdquality_conferences_720] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [cdquality_conferences_720] destination_number(kb-101) =~ /^(36\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->cdquality_conferences_480] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [cdquality_conferences_480] destination_number(kb-101) =~ /^(37\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->cdquality_conferences_320] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [cdquality_conferences_320] destination_number(kb-101) =~ /^(38\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->freeswitch_public_conf_via_sip] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [freeswitch_public_conf_via_sip] destination_number(kb-101) =~ /^9(888|8888|1616|3232)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->mad_boss_intercom] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [mad_boss_intercom] destination_number(kb-101) =~ /^0911$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->mad_boss_intercom] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [mad_boss_intercom] destination_number(kb-101) =~ /^0912$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->mad_boss] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [mad_boss] destination_number(kb-101) =~ /^0913$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->ivr_demo] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [ivr_demo] destination_number(kb-101) =~ /^5000$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->dynamic_conference] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [dynamic_conference] destination_number(kb-101) =~ /^5001$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->rtp_multicast_page] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [rtp_multicast_page] destination_number(kb-101) =~ /^pagegroup$|^7243$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->park] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [park] destination_number(kb-101) =~ /^5900$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->unpark] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [unpark] destination_number(kb-101) =~ /^5901$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->valet_park] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [valet_park] destination_number(kb-101) =~ /^(6000)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->valet_park] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [valet_park] destination_number(kb-101) =~ /^((?!6000)60\d{2})$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->park] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [park] source(mod_sofia) =~ /mod_sofia/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [park] destination_number(kb-101) =~ /park+(\d+)/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->unpark] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [unpark] source(mod_sofia) =~ /mod_sofia/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [unpark] destination_number(kb-101) =~ /^parking$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->park] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [park] source(mod_sofia) =~ /mod_sofia/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [park] destination_number(kb-101) =~ /callpark/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->unpark] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [unpark] source(mod_sofia) =~ /mod_sofia/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [unpark] destination_number(kb-101) =~ /pickup/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->wait] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [wait] destination_number(kb-101) =~ /^wait$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->fax_receive] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [fax_receive] destination_number(kb-101) =~ /^9178$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->fax_transmit] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [fax_transmit] destination_number(kb-101) =~ /^9179$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->ringback_180] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [ringback_180] destination_number(kb-101) =~ /^9180$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->ringback_183_uk_ring] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [ringback_183_uk_ring] destination_number(kb-101) =~ /^9181$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->ringback_183_music_ring] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [ringback_183_music_ring] destination_number(kb-101) =~ /^9182$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->ringback_post_answer_uk_ring] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [ringback_post_answer_uk_ring] destination_number(kb-101) =~ /^9183$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->ringback_post_answer_music] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [ringback_post_answer_music] destination_number(kb-101) =~ /^9184$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->ClueCon] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [ClueCon] destination_number(kb-101) =~ /^9191$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->show_info] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [show_info] destination_number(kb-101) =~ /^9192$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->video_record] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [video_record] destination_number(kb-101) =~ /^9193$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->video_playback] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [video_playback] destination_number(kb-101) =~ /^9194$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->delay_echo] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [delay_echo] destination_number(kb-101) =~ /^9195$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->echo] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [echo] destination_number(kb-101) =~ /^9196$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->milliwatt] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [milliwatt] destination_number(kb-101) =~ /^9197$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->tone_stream] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [tone_stream] destination_number(kb-101) =~ /^9198$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->zrtp_enrollement] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [zrtp_enrollement] destination_number(kb-101) =~ /^9787$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->hold_music] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [hold_music] destination_number(kb-101) =~ /^9664$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->laugh break] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [laugh break] destination_number(kb-101) =~ /^9386$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->101] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [101] destination_number(kb-101) =~ /^101$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->pizza_demo] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [pizza_demo] destination_number(kb-101) =~ /^(pizza|74992)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->Talking Clock Time] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [Talking Clock Time] destination_number(kb-101) =~ /^9170$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->Talking Clock Date] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [Talking Clock Date] destination_number(kb-101) =~ /^9171$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->Talking Clock Date and Time] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [Talking Clock Date and Time] destination_number(kb-101) =~ /^9172$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->local.example.com http://local.example.com] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [local.example.com http://local.example.com] ${toll_allow}() =~ /local/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->domestic.example.com http://domestic.example.com] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [domestic.example.com http://domestic.example.com] ${toll_allow}() =~ /domestic/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->international.example.com http://international.example.com] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (FAIL) [international.example.com http://international.example.com] ${toll_allow}() =~ /international/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 parsing [default->enum] continue=falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [enum] ${module_exists(mod_enum)}(true) =~ /true/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Regex (PASS) [enum] destination_number(kb-101) =~ /^(.*)$/ break=on-falseDialplan: sofia/internal/100@192.168.1.19 100@192.168.1.19 Action transfer(kb-101 enum)2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:287 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State Change CS_ROUTING -> CS_EXECUTE2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:644 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State ROUTING going to sleep2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_EXECUTE (Cur 1 Tot 1)2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:651 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State EXECUTE2020-01-07 08:58:59.883518 [DEBUG] mod_sofia.c:209 sofia/internal/100@192.168.1.19 100@192.168.1.19 SOFIA EXECUTE2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:329 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard EXECUTEEXECUTE [depth=0] sofia/internal/100@192.168.1.19 100@192.168.1.19 hash(insert/192.168.1.19-spymap/100/cdedc9ce-7fcd-47b4-aeaa-2d793b5df934)EXECUTE [depth=0] sofia/internal/100@192.168.1.19 100@192.168.1.19 hash(insert/192.168.1.19-last_dial/100/kb-101)EXECUTE [depth=0] sofia/internal/100@192.168.1.19 100@192.168.1.19 hash(insert/192.168.1.19-last_dial/global/cdedc9ce-7fcd-47b4-aeaa-2d793b5df934)EXECUTE [depth=0] sofia/internal/100@192.168.1.19 100@192.168.1.19 export(RFC2822_DATE=Tue, 07 Jan 2020 08:58:59 +0200)2020-01-07 08:58:59.883518 [DEBUG] switch_channel.c:1310 EXPORT (export_vars) [RFC2822_DATE]=[Tue, 07 Jan 2020 08:58:59 +0200]EXECUTE [depth=0] sofia/internal/100@192.168.1.19 100@192.168.1.19 transfer(kb-101 enum)2020-01-07 08:58:59.883518 [DEBUG] switch_ivr.c:2231 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State Change CS_EXECUTE -> CS_ROUTING2020-01-07 08:58:59.883518 [NOTICE] switch_ivr.c:2238 Transfer sofia/internal/100@192.168.1.19 100@192.168.1.19 to enum[kb-101@default]2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:651 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State EXECUTE going to sleep2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_ROUTING (Cur 1 Tot 1)2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:644 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State ROUTING2020-01-07 08:58:59.883518 [DEBUG] mod_sofia.c:145 Call appears to be already acknowledged2020-01-07 08:58:59.883518 [DEBUG] mod_sofia.c:154 sofia/internal/100@192.168.1.19 100@192.168.1.19 SOFIA ROUTING2020-01-07 08:58:59.883518 [DEBUG] switch_core_state_machine.c:236 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard ROUTING2020-01-07 08:58:59.883518 [DEBUG] mod_enum.c:645 ENUM Lookup on kb-1012020-01-07 08:58:59.903496 [DEBUG] mod_enum.c:497 No Nameservers specified, using host default2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:287 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State Change CS_ROUTING -> CS_EXECUTE2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:644 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State ROUTING going to sleep2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_EXECUTE (Cur 1 Tot 1)2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:651 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State EXECUTE2020-01-07 08:59:00.243512 [DEBUG] mod_sofia.c:209 sofia/internal/100@192.168.1.19 100@192.168.1.19 SOFIA EXECUTE2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:329 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard EXECUTE2020-01-07 08:59:00.243512 [NOTICE] switch_core_state_machine.c:386 sofia/internal/100@192.168.1.19 100@192.168.1.19 has executed the last dialplan instruction, hanging up.2020-01-07 08:59:00.243512 [NOTICE] switch_core_state_machine.c:388 Hangup sofia/internal/100@192.168.1.19 100@192.168.1.19 [CS_EXECUTE] [NORMAL_CLEARING]2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:651 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State EXECUTE going to sleep2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_HANGUP (Cur 1 Tot 1)2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:848 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Callstate Change RINGING -> HANGUP2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:850 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State HANGUP2020-01-07 08:59:00.243512 [DEBUG] mod_sofia.c:453 Channel sofia/internal/100@192.168.1.19 100@192.168.1.19 hanging up, cause: NORMAL_CLEARING2020-01-07 08:59:00.243512 [DEBUG] mod_sofia.c:598 Responding to INVITE with: 4802020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:60 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard HANGUP, cause: NORMAL_CLEARING2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:850 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State HANGUP going to sleep2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:620 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State Change CS_HANGUP -> CS_REPORTING2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:585 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_REPORTING (Cur 1 Tot 1)2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:936 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State REPORTING2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:174 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard REPORTING, cause: NORMAL_CLEARING2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:936 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State REPORTING going to sleep2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:611 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State Change CS_REPORTING -> CS_DESTROY2020-01-07 08:59:00.243512 [DEBUG] switch_core_session.c:1726 Session 1 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Locked, Waiting on external entities2020-01-07 08:59:00.243512 [NOTICE] switch_core_session.c:1744 Session 1 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Ended2020-01-07 08:59:00.243512 [NOTICE] switch_core_session.c:1748 Close Channel sofia/internal/100@192.168.1.19 100@192.168.1.19 [CS_DESTROY]2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:739 (sofia/internal/100@192.168.1.19 100@192.168.1.19) Running State Change CS_DESTROY (Cur 0 Tot 1)2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:749 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State DESTROY2020-01-07 08:59:00.243512 [DEBUG] mod_sofia.c:364 sofia/internal/100@192.168.1.19 100@192.168.1.19 SOFIA DESTROY2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:181 sofia/internal/100@192.168.1.19 100@192.168.1.19 Standard DESTROY2020-01-07 08:59:00.243512 [DEBUG] switch_core_state_machine.c:749 (sofia/internal/100@192.168.1.19 100@192.168.1.19) State DESTROY going to sleep2020-01-07 09:00:30.663563 [NOTICE] mod_signalwire.c:379 Go to https://signalwire.com https://signalwire.com to set up your Connector now! Enter connection token ac8b8b81-a415-49a4-b67d-015b1b052e7f2020-01-07 09:00:30.663563 [INFO] mod_signalwire.c:1009 Next SignalWire adoption check in 4 minutesfreeswitch@deb9base>*
On Sat, Jan 4, 2020 at 10:01 PM David Villasmil < david.villasmil.work@gmail.com> wrote:
We won’t be able to see much without logs.
There should be no registrations on freeswitch.
On Sat, 4 Jan 2020 at 20:19, John Tuxies atuxnull@gmail.com wrote:
In Freeswitch i check registrations in the console (fs_cli), correct? What about kamailio?
On Saturday, January 4, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
Ok just checked it out. It’s pretty old, but should still work. Can you paste kamailio’s and freeswitch logs when one user is trying to call the other? There should be no authentication on the freeswitch side. It should blindly forward to kamailio.
On Sat, 4 Jan 2020 at 13:34, John Tuxies atuxnull@gmail.com wrote:
I have followed this guide https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc My system is a virtual machine Debian 9 x64bit. The file that i attached was the Kamailio and Freeswitch folders under /etc
On Saturday, January 4, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
I understand, that’s a good way to start off. What guide are you following?
On Sat, 4 Jan 2020 at 09:44, John Tuxies atuxnull@gmail.com wrote:
Hi David, thanks for the reply.
I do not know much and i am trying my baby steps following guides. I have followed the guide from kamailio on how to integrate it with Freeswitch. All i want is a single machine or vm with kamailio and freeswitch. General sip calling and registration will be handled by kamailio itself. All other services such as ivr, conference, voicemail etc will be handled by freeswitch. I would appreciate any help available, please.
On Friday, January 3, 2020, David Villasmil < david.villasmil.work@gmail.com> wrote:
> Don’t get me wrong, but what’s the point of registering on kamailio > AND freeswitch? What’s the end use? You may not need to register on both, > and you may not even need fs for rtp relay. > > On Fri, 3 Jan 2020 at 12:34, John Tuxies atuxnull@gmail.com wrote: > >> Happy new year. >> >> Since the system got unusable from the tries, i had to reinstall >> Debian 9 x64bit and i tried to make it one step at a time. Kamailio is >> installed and the users 100 and 101 can call each other and have payload. >> Once the Freeswitch is installed and the config is made to the xml >> files, the users just register to Kamailio, but *cannot *call each >> other. >> Once, this is sorted then i will proceed with the Siremis >> installation & configuration. >> I am attaching the /etc/kamailio and /etc/freeswitch files >> >> Thanks in advance >> John >> >> On Sun, Dec 29, 2019 at 12:27 AM Fred Posner fred@palner.com >> wrote: >> >>> It’s hard to make suggestions without knowing what errors you were >>> having. >>> >>> -- Fred >>> direct/sms +1 (336) 439-3733 >>> >>> >>> On Dec 28, 2019, at 3:32 PM, John Tuxies atuxnull@gmail.com >>> wrote: >>> >>> I have a Debian server running Kamailio and i have all my users >>> regiatering and talking to each other. I do create/remove users from >>> Siremis. I have followed the guide from here: >>> >>> https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-ap... >>> I would like to add freeswitch to the same server and add >>> conference, voicemail, supplementary services for my users. >>> I have given it a try to install freeswitch and tried to configure >>> it accordingly to >>> https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc >>> But.now the Siremis gui shows a lot of errors and i cannot login >>> any more. Since it is a Virtual machine i reverted it back and it works >>> without freeswitch. >>> How could i integrate freeswitch to my system please? >>> >>> >>> >>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> sr-users@lists.kamailio.org >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> >>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> sr-users@lists.kamailio.org >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users@lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> > -- > Regards, > > David Villasmil > email: david.villasmil.work@gmail.com > phone: +34669448337 > _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-
Alex Balashov -
David Villasmil -
Fred Posner -
John Tuxies