27 Apr
2004
27 Apr
'04
5:59 p.m.
Hi,
i'm trying to use t_relay_to_tcp() on a machine with several IP
addresses on just one ethernet interface.
SER seems not to set the source address of the TCP connection, so the OS
(more or less) randomly chooses one of the virtual addresses on the
interface, which makes in turn filtering based on source ip address
a B<- (pain in the a** ;).
Is there any way to configure SER 0.8.12 to use a specific source
address in outbound tcp connections (it works for udp, though)?
thanks
axelm
30 Apr
30 Apr
10:15 p.m.
On Apr 27, 2004 at 17:59, Alexander Mayrhofer <axelm(a)nic.at> wrote:
Hi,
i'm trying to use t_relay_to_tcp() on a machine with several IP
addresses on just one ethernet interface.
SER seems not to set the source address of the TCP connection, so the OS
(more or less) randomly chooses one of the virtual addresses on the
interface, which makes in turn filtering based on source ip address
a B<- (pain in the a** ;).
Is there any way to configure SER 0.8.12 to use a specific source
address in outbound tcp connections (it works for udp, though)?
No. Ser will try to reuse a tcp connection, but if it has to open a new
one it won't set the address of the TCP connection (IIRC there were some
discussion about this recently on serdev).
I will fix it sometime in the near future, but I don't think I will
backport it to stable (unless lots of people test and it proves not to
brake anything).
Andrei
7300
days inactive
7303
days old
1 comments
2 participants
participants (2)
-
Alexander Mayrhofer -
Andrei Pelinescu-Onciul