rtpengine error: no rtpp_set_list->rset_first
Hello to everyone. I deployed Kamailio on Debian system. Install was successfull. I have the task to use Kamailio as proxy between Avaya PBX and Videoconference System. Outgoing calls only from IPPhone ----- Avaya PBX ---sip----> Kamailio -----sip----> Video System-IVR Now Im trying setup rtpengine for proxy media . Kamailio has some errors by starting service. ERROR: rtpengine [rtpengine.c:3131]: select_rtpp_set(): no rtpp_set_list->rset_first Jun 06 12:07:00 zaks-sbc01-op /usr/sbin/kamailio[635658]: NOTICE: rtpengine [rtpengine.c:1815]: mod_init(): Default rtpp set 0 NOT found Missed out on something in config?
On 06/06/2025 06.37, disa_369--- via sr-users wrote:
Hello to everyone. I deployed Kamailio on Debian system. Install was successfull. I have the task to use Kamailio as proxy between Avaya PBX and Videoconference System. Outgoing calls only from IPPhone ----- Avaya PBX ---sip----> Kamailio -----sip----> Video System-IVR Now Im trying setup rtpengine for proxy media . Kamailio has some errors by starting service. ERROR: rtpengine [rtpengine.c:3131]: select_rtpp_set(): no rtpp_set_list->rset_first Jun 06 12:07:00 zaks-sbc01-op /usr/sbin/kamailio[635658]: NOTICE: rtpengine [rtpengine.c:1815]: mod_init(): Default rtpp set 0 NOT found
Missed out on something in config?
What does your rtpengine module config look like? Cheers
Hello Richard. Here it is [rtpengine] table = 0 # no-fallback = false ### for userspace forwarding only: # table = -1 ### a single interface: # interface = 123.234.345.456 ### separate multiple interfaces with semicolons: # interface = internal/12.23.34.45;external/23.34.45.54 ### for different advertised address: # interface = 12.23.34.45!23.34.45.56 interface = internal/10.192.32.185 # name of config section in this file to contain signalling templates templates = templates listen-ng = 127.0.0.1:2223 # listen-tcp = 25060 # listen-udp = 12222 ### interface for HTTP, WS and Prometheus # listen-http = 9101 listen-http = localhost:2225 # listen-https = localhost:2226 # https-cert = # https-key = listen-cli = localhost:2224 timeout = 60 silent-timeout = 3600 tos = 184 # control-tos = 184 # control-pmtu = dont # delete-delay = 30 # final-timeout = 10800 # endpoint-learning = heuristic # reject-invalid-sdp = false # foreground = false # pidfile = /run/ngcp-rtpengine-daemon.pid # num-threads = 16 # media-num-threads = 8 # http-threads = 4 port-min = 30000 port-max = 40000 # max-sessions = 5000 # software-id = rtpengine # max-load = 5 # max-cpu = 90 # max-bandwidth = 10000000 # scheduling = default # priority = -3 # idle-scheduling = idle # idle-priority = 10 recording-dir = /var/spool/rtpengine recording-method = proc # recording-format = raw # redis = 127.0.0.1:6379/5 # redis-write = password@12.23.34.45:6379/42 # redis-subscribe = password@12.23.34.45:6379/43 # redis-num-threads = 8 # no-redis-required = false # redis-expires = 86400 # redis-allowed-errors = -1 # redis-disable-time = 10 # redis-cmd-timeout = 0 # redis-connect-timeout = 1000 # redis-resolve-on-reconnect = false # b2b-url = http://127.0.0.1:8090/ # xmlrpc-format = 0 # janus-secret = ABC123 log-level = 7 # log-stderr = false # log-facility = daemon # log-facility-cdr = local0 # log-facility-rtcp = local1 # debug-srtp = false # log-srtp-keys = false # dtls-cert-cipher = prime256v1 # dtls-rsa-key-size = 2048 # dtls-mtu = 1200 # dtls-signature = sha-256 # dtls-ciphers = DEFAULT:!NULL:!aNULL:!SHA256:!SHA384:!aECDH:!AESGCM+AES256:!aPSK # dtmf-no-log-injects = 0 # graphite = 127.0.0.1:9006 # graphite-interval = 60 # graphite-prefix = foobar. # homer = 123.234.345.456:65432 # homer-protocol = udp # homer-id = 2001 # mysql-host = localhost # mysql-port = 3306 # mysql-user = mysql # myser-pass = mysql # mysql-query = select data from voip.files where id = %llu # dtx-delay = 50 # max-dtx = 600 # dtx-buffer = 5 # dtx-lag = 100 # dtx-shift = 0 # amr-dtx = native # dtx-cn-params = 60 # silence-detect = 0.05 # cn-payload = 60 # player-cache = false # kernel-player = 0 # kernel-player-media = 128 # audio-buffer-length = 120 # audio-buffer-delay = 10 # audio-player = on-demand # sip-source = false # dtls-passive = false # mqtt-host = localhost # mqtt-port = 1883 # mqtt-tls-alpn = mqtt # mqtt-id = # mqtt-user = foo # mqtt-pass = bar # mqtt-capath = # mqtt-cafile = # mqtt-certfile = # mqtt-keyfile = # mqtt-publish-qos = 0 # mqtt-publish-topic = rtpengine # mqtt-publish-interval = 5000 # mqtt-publish-scope = media # mos = CQ # poller-per-thread = false # io-uring = false # socket-cpu-affinity = -1 # rtcp-interval = 5000 # music-on-hold max possible duration (in ms). # When not defined (set to 0), it takes 1800000ms default value. # moh-max-duration = 1800000 # music-on-hold max possible repeats. # moh-max-duration always takes a precedence over it. # By default is always 999 if not defined otherwise. # moh-max-repeats = 999 # controls the value to be added to the session level of SDP # whenever MoH is triggered. If not defined, then not in use. # moh-attr-name = rtpengine-hold # preload-media-files = /var/media/file1.wav ; /var/media/file2.wav ; /var/media/file3.wav ; on-demand # media-files-reload = 60 # preload-db-media = 1; 2; 3; 4; on-demand # db-media-reload = 3600 # db-media-cache = /var/cache/rtpengine # preload-db-cache = 1; 2; 3; 4; on-demand # cache-media-reload = 3600 # signalling templates (see key `templates` above) [templates] WebRTC = transport-protocol=UDP/TLS/RTP/SAVPF ICE=force trickle-ICE rtcp-mux=[offer require] no-rtcp-attribute SDES=off generate-mid [rtpengine-testing] table = -1 interface = 10.15.20.121 listen-ng = 2223 foreground = true log-stderr = true log-level = 7 prokhorovdg_adm_rn@zaks-sbc01-op:~$ sudo nona /etc/rtpengine/rtpengine.conf sudo: nona: command not found prokhorovdg_adm_rn@zaks-sbc01-op:~$ sudo nano /etc/rtpengine/rtpengine.conf prokhorovdg_adm_rn@zaks-sbc01-op:~$ sudo cat /etc/rtpengine/rtpengine.conf [rtpengine] table = 0 # no-fallback = false ### for userspace forwarding only: # table = -1 ### a single interface: # interface = 123.234.345.456 ### separate multiple interfaces with semicolons: # interface = internal/12.23.34.45;external/23.34.45.54 ### for different advertised address: # interface = 12.23.34.45!23.34.45.56 interface = internal/10.192.32.185 # name of config section in this file to contain signalling templates templates = templates listen-ng = 127.0.0.1:2223 # listen-tcp = 25060 # listen-udp = 12222 ### interface for HTTP, WS and Prometheus # listen-http = 9101 listen-http = localhost:2225 # listen-https = localhost:2226 # https-cert = # https-key = listen-cli = localhost:2224 timeout = 60 silent-timeout = 3600 tos = 184 # control-tos = 184 # control-pmtu = dont # delete-delay = 30 # final-timeout = 10800 # endpoint-learning = heuristic # reject-invalid-sdp = false # foreground = false # pidfile = /run/ngcp-rtpengine-daemon.pid # num-threads = 16 # media-num-threads = 8 # http-threads = 4 port-min = 30000 port-max = 40000 # max-sessions = 5000 # software-id = rtpengine # max-load = 5 # max-cpu = 90 # max-bandwidth = 10000000 # scheduling = default # priority = -3 # idle-scheduling = idle # idle-priority = 10 recording-dir = /var/spool/rtpengine recording-method = proc # recording-format = raw # redis = 127.0.0.1:6379/5 # redis-write = password@12.23.34.45:6379/42 # redis-subscribe = password@12.23.34.45:6379/43 # redis-num-threads = 8 # no-redis-required = false # redis-expires = 86400 # redis-allowed-errors = -1 # redis-disable-time = 10 # redis-cmd-timeout = 0 # redis-connect-timeout = 1000 # redis-resolve-on-reconnect = false # b2b-url = http://127.0.0.1:8090/ # xmlrpc-format = 0 # janus-secret = ABC123 log-level = 7 # log-stderr = false # log-facility = daemon # log-facility-cdr = local0 # log-facility-rtcp = local1 # debug-srtp = false # log-srtp-keys = false # dtls-cert-cipher = prime256v1 # dtls-rsa-key-size = 2048 # dtls-mtu = 1200 # dtls-signature = sha-256 # dtls-ciphers = DEFAULT:!NULL:!aNULL:!SHA256:!SHA384:!aECDH:!AESGCM+AES256:!aPSK # dtmf-no-log-injects = 0 # graphite = 127.0.0.1:9006 # graphite-interval = 60 # graphite-prefix = foobar. # homer = 123.234.345.456:65432 # homer-protocol = udp # homer-id = 2001 # mysql-host = localhost # mysql-port = 3306 # mysql-user = mysql # myser-pass = mysql # mysql-query = select data from voip.files where id = %llu # dtx-delay = 50 # max-dtx = 600 # dtx-buffer = 5 # dtx-lag = 100 # dtx-shift = 0 # amr-dtx = native # dtx-cn-params = 60 # silence-detect = 0.05 # cn-payload = 60 # player-cache = false # kernel-player = 0 # kernel-player-media = 128 # audio-buffer-length = 120 # audio-buffer-delay = 10 # audio-player = on-demand # sip-source = false # dtls-passive = false # mqtt-host = localhost # mqtt-port = 1883 # mqtt-tls-alpn = mqtt # mqtt-id = # mqtt-user = foo # mqtt-pass = bar # mqtt-capath = # mqtt-cafile = # mqtt-certfile = # mqtt-keyfile = # mqtt-publish-qos = 0 # mqtt-publish-topic = rtpengine # mqtt-publish-interval = 5000 # mqtt-publish-scope = media # mos = CQ # poller-per-thread = false # io-uring = false # socket-cpu-affinity = -1 # rtcp-interval = 5000 # music-on-hold max possible duration (in ms). # When not defined (set to 0), it takes 1800000ms default value. # moh-max-duration = 1800000 # music-on-hold max possible repeats. # moh-max-duration always takes a precedence over it. # By default is always 999 if not defined otherwise. # moh-max-repeats = 999 # controls the value to be added to the session level of SDP # whenever MoH is triggered. If not defined, then not in use. # moh-attr-name = rtpengine-hold # preload-media-files = /var/media/file1.wav ; /var/media/file2.wav ; /var/media/file3.wav ; on-demand # media-files-reload = 60 # preload-db-media = 1; 2; 3; 4; on-demand # db-media-reload = 3600 # db-media-cache = /var/cache/rtpengine # preload-db-cache = 1; 2; 3; 4; on-demand # cache-media-reload = 3600 # signalling templates (see key `templates` above) [templates] WebRTC = transport-protocol=UDP/TLS/RTP/SAVPF ICE=force trickle-ICE rtcp-mux=[offer require] no-rtcp-attribute SDES=off generate-mid [rtpengine-testing] table = -1 interface = 10.15.20.121 listen-ng = 2223 foreground = true log-stderr = true log-level = 7
I meant the config for Kamailio's rtpengine module. On 09/06/2025 02.33, disa_369--- via sr-users wrote:
Hello Richard. Here it is
[rtpengine] table = 0 # no-fallback = false ### for userspace forwarding only: # table = -1
### a single interface: # interface = 123.234.345.456 ### separate multiple interfaces with semicolons: # interface = internal/12.23.34.45;external/23.34.45.54 ### for different advertised address: # interface = 12.23.34.45!23.34.45.56
interface = internal/10.192.32.185
# name of config section in this file to contain signalling templates templates = templates
listen-ng = 127.0.0.1:2223 # listen-tcp = 25060 # listen-udp = 12222
### interface for HTTP, WS and Prometheus # listen-http = 9101 listen-http = localhost:2225
# listen-https = localhost:2226 # https-cert = # https-key =
listen-cli = localhost:2224
timeout = 60 silent-timeout = 3600 tos = 184 # control-tos = 184 # control-pmtu = dont # delete-delay = 30 # final-timeout = 10800 # endpoint-learning = heuristic # reject-invalid-sdp = false
# foreground = false # pidfile = /run/ngcp-rtpengine-daemon.pid # num-threads = 16 # media-num-threads = 8 # http-threads = 4
port-min = 30000 port-max = 40000 # max-sessions = 5000
# software-id = rtpengine # max-load = 5 # max-cpu = 90 # max-bandwidth = 10000000 # scheduling = default # priority = -3 # idle-scheduling = idle # idle-priority = 10
recording-dir = /var/spool/rtpengine recording-method = proc # recording-format = raw
# redis = 127.0.0.1:6379/5 # redis-write = password@12.23.34.45:6379/42 # redis-subscribe = password@12.23.34.45:6379/43 # redis-num-threads = 8 # no-redis-required = false # redis-expires = 86400 # redis-allowed-errors = -1 # redis-disable-time = 10 # redis-cmd-timeout = 0 # redis-connect-timeout = 1000 # redis-resolve-on-reconnect = false
# b2b-url = http://127.0.0.1:8090/ # xmlrpc-format = 0 # janus-secret = ABC123
log-level = 7 # log-stderr = false # log-facility = daemon # log-facility-cdr = local0 # log-facility-rtcp = local1 # debug-srtp = false # log-srtp-keys = false # dtls-cert-cipher = prime256v1 # dtls-rsa-key-size = 2048 # dtls-mtu = 1200 # dtls-signature = sha-256 # dtls-ciphers = DEFAULT:!NULL:!aNULL:!SHA256:!SHA384:!aECDH:!AESGCM+AES256:!aPSK
# dtmf-no-log-injects = 0
# graphite = 127.0.0.1:9006 # graphite-interval = 60 # graphite-prefix = foobar.
# homer = 123.234.345.456:65432 # homer-protocol = udp # homer-id = 2001
# mysql-host = localhost # mysql-port = 3306 # mysql-user = mysql # myser-pass = mysql # mysql-query = select data from voip.files where id = %llu
# dtx-delay = 50 # max-dtx = 600 # dtx-buffer = 5 # dtx-lag = 100 # dtx-shift = 0 # amr-dtx = native # dtx-cn-params = 60 # silence-detect = 0.05 # cn-payload = 60
# player-cache = false # kernel-player = 0 # kernel-player-media = 128
# audio-buffer-length = 120 # audio-buffer-delay = 10 # audio-player = on-demand
# sip-source = false # dtls-passive = false
# mqtt-host = localhost # mqtt-port = 1883 # mqtt-tls-alpn = mqtt # mqtt-id = # mqtt-user = foo # mqtt-pass = bar # mqtt-capath = # mqtt-cafile = # mqtt-certfile = # mqtt-keyfile = # mqtt-publish-qos = 0 # mqtt-publish-topic = rtpengine # mqtt-publish-interval = 5000 # mqtt-publish-scope = media
# mos = CQ # poller-per-thread = false # io-uring = false # socket-cpu-affinity = -1 # rtcp-interval = 5000
# music-on-hold max possible duration (in ms). # When not defined (set to 0), it takes 1800000ms default value. # moh-max-duration = 1800000
# music-on-hold max possible repeats. # moh-max-duration always takes a precedence over it. # By default is always 999 if not defined otherwise. # moh-max-repeats = 999
# controls the value to be added to the session level of SDP # whenever MoH is triggered. If not defined, then not in use. # moh-attr-name = rtpengine-hold
# preload-media-files = /var/media/file1.wav ; /var/media/file2.wav ; /var/media/file3.wav ; on-demand # media-files-reload = 60 # preload-db-media = 1; 2; 3; 4; on-demand # db-media-reload = 3600 # db-media-cache = /var/cache/rtpengine # preload-db-cache = 1; 2; 3; 4; on-demand # cache-media-reload = 3600
# signalling templates (see key `templates` above) [templates] WebRTC = transport-protocol=UDP/TLS/RTP/SAVPF ICE=force trickle-ICE rtcp-mux=[offer require] no-rtcp-attribute SDES=off generate-mid
[rtpengine-testing] table = -1 interface = 10.15.20.121 listen-ng = 2223 foreground = true log-stderr = true log-level = 7 prokhorovdg_adm_rn@zaks-sbc01-op:~$ sudo nona /etc/rtpengine/rtpengine.conf sudo: nona: command not found prokhorovdg_adm_rn@zaks-sbc01-op:~$ sudo nano /etc/rtpengine/rtpengine.conf prokhorovdg_adm_rn@zaks-sbc01-op:~$ sudo cat /etc/rtpengine/rtpengine.conf [rtpengine]
table = 0 # no-fallback = false ### for userspace forwarding only: # table = -1
### a single interface: # interface = 123.234.345.456 ### separate multiple interfaces with semicolons: # interface = internal/12.23.34.45;external/23.34.45.54 ### for different advertised address: # interface = 12.23.34.45!23.34.45.56
interface = internal/10.192.32.185
# name of config section in this file to contain signalling templates templates = templates
listen-ng = 127.0.0.1:2223 # listen-tcp = 25060 # listen-udp = 12222
### interface for HTTP, WS and Prometheus # listen-http = 9101 listen-http = localhost:2225
# listen-https = localhost:2226 # https-cert = # https-key =
listen-cli = localhost:2224
timeout = 60 silent-timeout = 3600 tos = 184 # control-tos = 184 # control-pmtu = dont # delete-delay = 30 # final-timeout = 10800 # endpoint-learning = heuristic # reject-invalid-sdp = false
# foreground = false # pidfile = /run/ngcp-rtpengine-daemon.pid # num-threads = 16 # media-num-threads = 8 # http-threads = 4
port-min = 30000 port-max = 40000 # max-sessions = 5000
# software-id = rtpengine # max-load = 5 # max-cpu = 90 # max-bandwidth = 10000000 # scheduling = default # priority = -3 # idle-scheduling = idle # idle-priority = 10
recording-dir = /var/spool/rtpengine recording-method = proc # recording-format = raw
# redis = 127.0.0.1:6379/5 # redis-write = password@12.23.34.45:6379/42 # redis-subscribe = password@12.23.34.45:6379/43 # redis-num-threads = 8 # no-redis-required = false # redis-expires = 86400 # redis-allowed-errors = -1 # redis-disable-time = 10 # redis-cmd-timeout = 0 # redis-connect-timeout = 1000 # redis-resolve-on-reconnect = false
# b2b-url = http://127.0.0.1:8090/ # xmlrpc-format = 0 # janus-secret = ABC123
log-level = 7 # log-stderr = false # log-facility = daemon # log-facility-cdr = local0 # log-facility-rtcp = local1 # debug-srtp = false # log-srtp-keys = false # dtls-cert-cipher = prime256v1 # dtls-rsa-key-size = 2048 # dtls-mtu = 1200 # dtls-signature = sha-256 # dtls-ciphers = DEFAULT:!NULL:!aNULL:!SHA256:!SHA384:!aECDH:!AESGCM+AES256:!aPSK
# dtmf-no-log-injects = 0
# graphite = 127.0.0.1:9006 # graphite-interval = 60 # graphite-prefix = foobar.
# homer = 123.234.345.456:65432 # homer-protocol = udp # homer-id = 2001
# mysql-host = localhost # mysql-port = 3306 # mysql-user = mysql # myser-pass = mysql # mysql-query = select data from voip.files where id = %llu
# dtx-delay = 50 # max-dtx = 600 # dtx-buffer = 5 # dtx-lag = 100 # dtx-shift = 0 # amr-dtx = native # dtx-cn-params = 60 # silence-detect = 0.05 # cn-payload = 60
# player-cache = false # kernel-player = 0 # kernel-player-media = 128
# audio-buffer-length = 120 # audio-buffer-delay = 10 # audio-player = on-demand
# sip-source = false # dtls-passive = false
# mqtt-host = localhost # mqtt-port = 1883 # mqtt-tls-alpn = mqtt # mqtt-id = # mqtt-user = foo # mqtt-pass = bar # mqtt-capath = # mqtt-cafile = # mqtt-certfile = # mqtt-keyfile = # mqtt-publish-qos = 0 # mqtt-publish-topic = rtpengine # mqtt-publish-interval = 5000 # mqtt-publish-scope = media
# mos = CQ # poller-per-thread = false # io-uring = false # socket-cpu-affinity = -1 # rtcp-interval = 5000
# music-on-hold max possible duration (in ms). # When not defined (set to 0), it takes 1800000ms default value. # moh-max-duration = 1800000
# music-on-hold max possible repeats. # moh-max-duration always takes a precedence over it. # By default is always 999 if not defined otherwise. # moh-max-repeats = 999
# controls the value to be added to the session level of SDP # whenever MoH is triggered. If not defined, then not in use. # moh-attr-name = rtpengine-hold
# preload-media-files = /var/media/file1.wav ; /var/media/file2.wav ; /var/media/file3.wav ; on-demand # media-files-reload = 60 # preload-db-media = 1; 2; 3; 4; on-demand # db-media-reload = 3600 # db-media-cache = /var/cache/rtpengine # preload-db-cache = 1; 2; 3; 4; on-demand # cache-media-reload = 3600
# signalling templates (see key `templates` above) [templates] WebRTC = transport-protocol=UDP/TLS/RTP/SAVPF ICE=force trickle-ICE rtcp-mux=[offer require] no-rtcp-attribute SDES=off generate-mid
[rtpengine-testing] table = -1 interface = 10.15.20.121 listen-ng = 2223 foreground = true log-stderr = true log-level = 7 __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions -- sr-users@lists.kamailio.org To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
#!KAMAILIO # # Kamailio SIP Server v5.6 - default configuration script # - web: https://www.kamailio.org # - git: https://github.com/kamailio/kamailio # # Direct your questions about this file to: <sr-users@lists.kamailio.org> # # Refer to the Core CookBook at https://www.kamailio.org/wiki/ # for an explanation of possible statements, functions and parameters. # # Note: the comments can be: # - lines starting with #, but not the pre-processor directives, # which start with #!, like #!define, #!ifdef, #!endif, #!else, #!trydef, # #!subst, #!substdef, ... # - lines starting with // # - blocks enclosed in between /* */ # Note: the config performs symmetric SIP signaling # - it sends the reply to the source address of the request # - remove the use of force_rport() for asymmetric SIP signaling # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # - debug level increased to 3, logs still sent to syslog # - debugger module loaded with cfgtrace enabled # # *** To enable mysql: # - define WITH_MYSQL # # *** To enable authentication execute: # - enable mysql # - define WITH_AUTH # - add users using 'kamctl' or 'kamcli' # # *** To enable IP authentication execute: # - enable mysql # - enable authentication # - define WITH_IPAUTH # - add IP addresses with group id '1' to 'address' table # # *** To enable persistent user location execute: # - enable mysql # - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # - if modified headers or body in config must be used by presence handling: # - define WITH_MSGREBUILD # # *** To enable nat traversal execute: # - define WITH_NAT # - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPING # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To use RTPEngine (instead of RTPProxy) for nat traversal execute: # - define WITH_RTPENGINE # - install RTPEngine: https://github.com/sipwise/rtpengine # - start RTPEngine: # rtpengine --listen-ng=127.0.0.1:2223 ... # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enable database aliases lookup execute: # - enable mysql # - define WITH_ALIASDB # # *** To enable speed dial lookup execute: # - enable mysql # - define WITH_SPEEDDIAL # # *** To enable multi-domain support execute: # - enable mysql # - define WITH_MULTIDOMAIN # # *** To enable TLS support execute: # - adjust CFGDIR/tls.cfg as needed # - define WITH_TLS # # *** To enable JSONRPC over HTTP(S) support execute: # - define WITH_JSONRPC # - adjust event_route[xhttp:request] for access policy # # *** To enable anti-flood detection execute: # - adjust pike and htable=>ipban settings as needed (default is # block if more than 16 requests in 2 seconds and ban for 300 seconds) # - define WITH_ANTIFLOOD # # *** To block 3XX redirect replies execute: # - define WITH_BLOCK3XX # # *** To block 401 and 407 authentication replies execute: # - define WITH_BLOCK401407 # # *** To enable VoiceMail routing execute: # - define WITH_VOICEMAIL # - set the value of voicemail.srv_ip # - adjust the value of voicemail.srv_port # # *** To enhance accounting execute: # - enable mysql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ' '; ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ' '; #!endif ####### Include Local Config If Exists ######### import_file "kamailio-local.cfg" ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_DEBUG #!define DBGLEVEL 3 #!else #!define DBGLEVEL 2 #!endif #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!trydef DBURL "mysql://kamailio:kamailiorw@localhost/kamailio" #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 # FLB_ - per branch flags #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### /* LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR, ... */ debug=2 /* set to 'yes' to print log messages to terminal or use '-E' cli option */ log_stderror=no memdbg=5 memlog=5 log_facility=LOG_LOCAL0 log_prefix="{$mt $hdr(CSeq) $ci} " /* number of SIP routing processes for each UDP socket * - value inherited by tcp_children and sctp_children when not set explicitely */ children=8 /* uncomment the next line to disable TCP (default on) */ # disable_tcp=yes /* number of SIP routing processes for all TCP/TLS sockets */ # tcp_children=8 /* uncomment the next line to disable the auto discovery of local aliases * based on reverse DNS on IPs (default on) */ # auto_aliases=no /* add local domain aliases - it can be set many times */ # alias="sip.mydomain.com" /* listen sockets - if none set, Kamailio binds to all local IP addresses * - basic prototype (full prototype can be found in Wiki - Core Cookbook): * listen=[proto]:[localip]:[lport] advertise [publicip]:[pport] * - it can be set many times to add more sockets to listen to */ listen=tcp:127.0.0.1:5060 listen=tcp:10.192.32.185:5060 /* life time of TCP connection when there is no traffic * - a bit higher than registration expires to cope with UA behind NAT */ tcp_connection_lifetime=3605 /* upper limit for TCP connections (it includes the TLS connections) */ tcp_max_connections=2048 #!ifdef WITH_JSONRPC tcp_accept_no_cl=yes #!endif #!ifdef WITH_TLS enable_tls=yes /* upper limit for TLS connections */ tls_max_connections=2048 #!endif /* set it to yes to enable sctp and load sctp.so module */ enable_sctp=no ####### Custom Parameters ######### /* These parameters can be modified runtime via RPC interface * - see the documentation of 'cfg_rpc' module. * * Format: group.id = value 'desc' description * Access: $sel(cfg_get.group.id) or @cfg_get.group.id */ #!ifdef WITH_PSTN /* PSTN GW Routing * * - pstn.gw_ip: valid IP or hostname as string value, example: * pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" * * - by default is empty to avoid misrouting */ pstn.gw_ip = "" desc "PSTN GW Address" pstn.gw_port = "" desc "PSTN GW Port" #!endif #!ifdef WITH_VOICEMAIL /* VoiceMail Routing on offline, busy or no answer * * - by default Voicemail server IP is empty to avoid misrouting */ voicemail.srv_ip = "" desc "VoiceMail IP Address" voicemail.srv_port = "5060" desc "VoiceMail Port" #!endif ####### Modules Section ######## /* set paths to location of modules */ mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/" # mpath="/usr/local/lib64/kamailio/modules/" #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif #!ifdef WITH_JSONRPC loadmodule "xhttp.so" #!endif loadmodule "jsonrpcs.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "textopsx.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "acc.so" loadmodule "counters.so" loadmodule "rtpengine.so" loadmodule "uac.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_SPEEDDIAL loadmodule "speeddial.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" #!else loadmodule "rtpproxy.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif # ----------------- setting module-specific parameters --------------- # ----- jsonrpcs params ----- modparam("jsonrpcs", "pretty_format", 1) /* set the path to RPC fifo control file */ # modparam("jsonrpcs", "fifo_name", "/run/kamailio/kamailio_rpc.fifo") /* set the path to RPC unix socket control file */ # modparam("jsonrpcs", "dgram_socket", "/run/kamailio/kamailio_rpc.sock") #!ifdef WITH_JSONRPC modparam("jsonrpcs", "transport", 7) #!endif # ----- ctl params ----- /* set the path to RPC unix socket control file */ # modparam("ctl", "binrpc", "unix:/run/kamailio/kamailio_ctl") # ----- sanity params ----- modparam("sanity", "autodrop", 0) # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) # ----- rr params ----- # set next param to 1 to add value to ;lr param (helps with some UAs) modparam("rr", "enable_full_lr", 0) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 1) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ # modparam("registrar", "max_contacts", 10) /* max value for expires of registrations */ modparam("registrar", "max_expires", 3600) /* set it to 1 to enable GRUU */ modparam("registrar", "gruu_enabled", 0) /* set it to 0 to disable Path handling */ modparam("registrar", "use_path", 1) /* save Path even if not listed in Supported header */ modparam("registrar", "path_mode", 0) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. * if you enable this parameter, be sure the enable "append_fromtag" * in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- modparam("usrloc", "timer_interval", 60) modparam("usrloc", "timer_procs", 1) modparam("usrloc", "use_domain", MULTIDOMAIN) /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "load_backends", 1) #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- speeddial params ----- #!ifdef WITH_SPEEDDIAL modparam("speeddial", "db_url", DBURL) modparam("speeddial", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) /* register callback to match myself condition with domains list */ modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT #!ifdef WITH_RTPENGINE # ----- rtpengine params ----- modparam("rtpengine", "rtpengine_sock", "udp:127.0.0.1:2223") #!else # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") #!endif # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/etc/kamailio/tls.cfg") #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 16) modparam("pike", "remove_latency", 4) # ----- htable params ----- /* ip ban htable with autoexpire after 5 minutes */ modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) modparam("debugger", "log_level_name", "exec") #!endif ####### Routing Logic ######## /* Main SIP request routing logic * - processing of any incoming SIP request starts with this route * - note: this is the same as route { ... } */ request_route { # per request initial checks route(REQINIT); # NAT detection route(NATDETECT); # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) { route(RELAY); } exit; } # handle retransmissions if (!is_method("ACK")) { if(t_precheck_trans()) { t_check_trans(); exit; } t_check_trans(); } # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) { record_route(); } # account only INVITEs if (is_method("INVITE")) { uac_replace_to("","sip:3000@10.192.60.3"); setflag(FLT_ACC); # do accounting } if ($rU==$null) { sl_send_reply("484", "Address Incomplete"); exit; } $du = "sip:10.192.60.3:5060"; route(RELAY); exit; } # dispatch requests to foreign domains # route(SIPOUT); ### requests for my local domains # handle presence related requests # route(PRESENCE); # handle registrations # route(REGISTRAR); # if ($rU==$null) { # request with no Username in RURI # sl_send_reply("484","Address Incomplete"); # exit; # } # dispatch destinations to PSTN # route(PSTN); # user location service # route(LOCATION); # return; #} # Wrapper for relaying requests route[RELAY] { # enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o. if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH"); } if (is_method("INVITE|SUBSCRIBE|UPDATE")) { if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY"); } if (is_method("INVITE")) { if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE"); } if (has_body("application/sdp")) { rtpengine_manage("replace-session-connection replace-origin ICE=remove directi on=internal"); } #t_on_reply("REPLY"); #t_relay(); if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { # no connect for sending replies set_reply_no_connect(); # enforce symmetric signaling # - send back replies to the source address of request force_rport(); #!ifdef WITH_ANTIFLOOD # flood detection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp )\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$s i:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if($ua =~ "friendly|scanner|sipcli|sipvicious|VaxSIPUserAgent|pplsip") { # silent drop for scanners - uncomment next line if want to repl y # sl_send_reply("200", "OK"); exit; } if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(is_method("OPTIONS") && uri==myself && $rU==$null) { sl_send_reply("200","Keepalive"); exit; } if(!sanity_check("17895", "7")) { xlog("Malformed SIP request from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (!has_totag()) return; # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { route(DLGURI); if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fa ils } else if ( is_method("ACK") ) { # ACK is forwarded statelessly route(NATMANAGE); } else if ( is_method("NOTIFY") ) { # Add Record-Route for in-dialog NOTIFY as per RFC 6665. record_route(); } route(RELAY); exit; } if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server route(RELAY); exit; } else { # ACK without matching transaction ... ignore and discar d exit; } } sl_send_reply("404","Not here"); exit; } # Handle SIP registrations route[REGISTRAR] { if (!is_method("REGISTER")) return; if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); #!ifdef WITH_NATSIPPING # do SIP NAT pinging setbflag(FLB_NATSIPPING); #!endif } if (!save("location")) { sl_reply_error(); } exit; } # User location service route[LOCATION] { #!ifdef WITH_SPEEDDIAL # search for short dialing - 2-digit extension if($rU=~"^[0-9][0-9]$") { if(sd_lookup("speed_dial")) { route(SIPOUT); } } #!endif #!ifdef WITH_ALIASDB # search in DB-based aliases if(alias_db_lookup("dbaliases")) { route(SIPOUT); } #!endif $avp(oexten) = $rU; if (!lookup("location")) { $var(rc) = $rc; route(TOVOICEMAIL); t_newtran(); switch ($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit; case -2: send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } route(RELAY); exit; } # Presence server processing route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") { route(TOVOICEMAIL); # returns here if no voicemail server is configured sl_send_reply("404", "No voicemail service"); exit; } #!ifdef WITH_PRESENCE #!ifdef WITH_MSGREBUILD # apply changes in case the request headers or body were modified msg_apply_changes(); #!endif if (!t_newtran()) { sl_reply_error(); exit; } if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if(is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # IP authorization and user authentication route[AUTH] { #!ifdef WITH_AUTH #!ifdef WITH_IPAUTH if((!is_method("REGISTER")) && allow_source_address()) { # source IP allowed return; } #!endif if (is_method("REGISTER") || from_uri==myself) { # authenticate requests if (!auth_check("$fd", "subscriber", "1")) { auth_challenge("$fd", "0"); exit; } # user authenticated - remove auth header if(!is_method("REGISTER|PUBLISH")) consume_credentials(); } # if caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (from_uri!=myself && uri!=myself) { sl_send_reply("403","Not relaying"); exit; } #!else # authentication not enabled - do not relay at all to foreign networks if(uri!=myself) { sl_send_reply("403","Not relaying"); exit; } #!endif return; } # Caller NAT detection route[NATDETECT] { #!ifdef WITH_NAT if (nat_uac_test("19")) { if (is_method("REGISTER")) { fix_nated_register(); } else { if(is_first_hop()) { set_contact_alias(); } } setflag(FLT_NATS); } #!endif return; } # RTPProxy control and signaling updates for NAT traversal route[NATMANAGE] { #!ifdef WITH_NAT if (is_request()) { if(has_totag()) { if(check_route_param("nat=yes")) { setbflag(FLB_NATB); } } } if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return; #!ifdef WITH_RTPENGINE if(nat_uac_test("8")) { rtpengine_manage("SIP-source-address replace-origin replace-sess ion-connection"); } else { rtpengine_manage("replace-origin replace-session-connection"); } #!else if(nat_uac_test("8")) { rtpproxy_manage("co"); } else { rtpproxy_manage("cor"); } #!endif if (is_request()) { if (!has_totag()) { if(t_is_branch_route()) { add_rr_param(";nat=yes"); } } } if (is_reply()) { if(isbflagset(FLB_NATB)) { if(is_first_hop()) set_contact_alias(); } } if(isbflagset(FLB_NATB)) { # no connect message in a dialog involving NAT traversal if (is_request()) { if(has_totag()) { set_forward_no_connect(); } } } #!endif return; } # URI update for dialog requests route[DLGURI] { #!ifdef WITH_NAT if(!isdsturiset()) { handle_ruri_alias(); } #!endif return; } # Routing to foreign domains route[SIPOUT] { if (uri==myself) return; append_hf("P-Hint: outbound\r\n"); route(RELAY); exit; } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN routing enabled but pstn.gw_ip not defined\n" ); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } # normalize target number for pstn gateway # - convert leading 00 to + if (starts_with("$rU", "00")) { strip(2); prefix("+"); } if (strempty($sel(cfg_get.pstn.gw_port))) { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); } else { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":" + $sel(cfg_get.pstn.gw_port); } route(RELAY); exit; #!endif return; } # JSONRPC over HTTP(S) routing #!ifdef WITH_JSONRPC event_route[xhttp:request] { set_reply_close(); set_reply_no_connect(); if(src_ip!=127.0.0.1) { xhttp_reply("403", "Forbidden", "text/html", "<html><body>Not allowed from $si</body></html>" ); exit; } if ($hu =~ "^/RPC") { jsonrpc_dispatch(); exit; } xhttp_reply("200", "OK", "text/html", "<html><body>Wrong URL $hu</body></html>"); exit; } #!endif # Routing to voicemail server route[TOVOICEMAIL] { #!ifdef WITH_VOICEMAIL if(!is_method("INVITE|SUBSCRIBE")) return; # check if VoiceMail server IP is defined if (strempty($sel(cfg_get.voicemail.srv_ip))) { xlog("SCRIPT: VoiceMail routing enabled but IP not defined\n"); return; } if(is_method("INVITE")) { if($avp(oexten)==$null) return; $ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_i p) + ":" + $sel(cfg_get.voicemail.srv_port); } else { if($rU==$null) return; $ru = "sip:" + $rU + "@" + $sel(cfg_get.voicemail.srv_ip) + ":" + $sel(cfg_get.voicemail.srv_port); } route(RELAY); exit; #!endif return; } # Manage outgoing branches branch_route[MANAGE_BRANCH] { xdbg("new branch [$T_branch_idx] to $ru\n"); route(NATMANAGE); return; } # Manage incoming replies reply_route { if(!sanity_check("17604", "6")) { xlog("Malformed SIP response from $si:$sp\n"); drop; } return; } # Manage incoming replies in transaction context onreply_route[MANAGE_REPLY] { xdbg("incoming reply\n"); if(status=~"[12][0-9][0-9]") { route(NATMANAGE); } #if (has_body("application/sdp")) { # rtpengine_manage(); #} return; } # Manage failure routing cases failure_route[MANAGE_FAILURE] { route(NATMANAGE); if (t_is_canceled()) exit; #!ifdef WITH_BLOCK3XX # block call redirect based on 3xx replies. if (t_check_status("3[0-9][0-9]")) { t_reply("404","Not found"); exit; } #!endif #!ifdef WITH_BLOCK401407 # block call redirect based on 401, 407 replies. if (t_check_status("401|407")) { t_reply("404","Not found"); exit; } #!endif #!ifdef WITH_VOICEMAIL # serial forking # - route to voicemail on busy or no answer (timeout) if (t_check_status("486|408")) { $du = $null; route(TOVOICEMAIL); exit; } #!endif return; }
And your kamailio-local.cfg? You probably don't have WITH_NAT and/or WITH_RTPENGINE defined? Chers On 09/06/2025 09.13, disa_369--- via sr-users wrote:
#!KAMAILIO # # Kamailio SIP Server v5.6 - default configuration script # - web:https://www.kamailio.org # - git:https://github.com/kamailio/kamailio # # Direct your questions about this file to:<sr-users@lists.kamailio.org> # # Refer to the Core CookBook athttps://www.kamailio.org/wiki/ # for an explanation of possible statements, functions and parameters. # # Note: the comments can be: # - lines starting with #, but not the pre-processor directives, # which start with #!, like #!define, #!ifdef, #!endif, #!else, #!trydef, # #!subst, #!substdef, ... # - lines starting with // # - blocks enclosed in between /* */ # Note: the config performs symmetric SIP signaling # - it sends the reply to the source address of the request # - remove the use of force_rport() for asymmetric SIP signaling # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # - debug level increased to 3, logs still sent to syslog # - debugger module loaded with cfgtrace enabled # # *** To enable mysql: # - define WITH_MYSQL # # *** To enable authentication execute: # - enable mysql # - define WITH_AUTH # - add users using 'kamctl' or 'kamcli' # # *** To enable IP authentication execute: # - enable mysql # - enable authentication # - define WITH_IPAUTH # - add IP addresses with group id '1' to 'address' table # # *** To enable persistent user location execute: # - enable mysql # - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # - if modified headers or body in config must be used by presence handling: # - define WITH_MSGREBUILD # # *** To enable nat traversal execute: # - define WITH_NAT # - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPING # - install RTPProxy:http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To use RTPEngine (instead of RTPProxy) for nat traversal execute: # - define WITH_RTPENGINE # - install RTPEngine:https://github.com/sipwise/rtpengine # - start RTPEngine: # rtpengine --listen-ng=127.0.0.1:2223 ... # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enable database aliases lookup execute: # - enable mysql # - define WITH_ALIASDB # # *** To enable speed dial lookup execute: # - enable mysql # - define WITH_SPEEDDIAL # # *** To enable multi-domain support execute: # - enable mysql # - define WITH_MULTIDOMAIN # # *** To enable TLS support execute: # - adjust CFGDIR/tls.cfg as needed # - define WITH_TLS # # *** To enable JSONRPC over HTTP(S) support execute: # - define WITH_JSONRPC # - adjust event_route[xhttp:request] for access policy # # *** To enable anti-flood detection execute: # - adjust pike and htable=>ipban settings as needed (default is # block if more than 16 requests in 2 seconds and ban for 300 seconds) # - define WITH_ANTIFLOOD # # *** To block 3XX redirect replies execute: # - define WITH_BLOCK3XX # # *** To block 401 and 407 authentication replies execute: # - define WITH_BLOCK401407 # # *** To enable VoiceMail routing execute: # - define WITH_VOICEMAIL # - set the value of voicemail.srv_ip # - adjust the value of voicemail.srv_port # # *** To enhance accounting execute: # - enable mysql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ' '; ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ' '; #!endif
####### Include Local Config If Exists ######### import_file "kamailio-local.cfg"
####### Defined Values #########
# *** Value defines - IDs used later in config #!ifdef WITH_DEBUG #!define DBGLEVEL 3 #!else #!define DBGLEVEL 2 #!endif
#!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!trydef DBURL "mysql://kamailio:kamailiorw@localhost/kamailio" #!endif
#!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif
# - flags # FLT_ - per transaction (message) flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5
# FLB_ - per branch flags #!define FLB_NATB 6 #!define FLB_NATSIPPING 7
####### Global Parameters #########
/* LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR, ... */ debug=2
/* set to 'yes' to print log messages to terminal or use '-E' cli option */ log_stderror=no
memdbg=5 memlog=5
log_facility=LOG_LOCAL0 log_prefix="{$mt $hdr(CSeq) $ci} "
/* number of SIP routing processes for each UDP socket * - value inherited by tcp_children and sctp_children when not set explicitely */ children=8
/* uncomment the next line to disable TCP (default on) */ # disable_tcp=yes
/* number of SIP routing processes for all TCP/TLS sockets */ # tcp_children=8
/* uncomment the next line to disable the auto discovery of local aliases * based on reverse DNS on IPs (default on) */ # auto_aliases=no
/* add local domain aliases - it can be set many times */ # alias="sip.mydomain.com"
/* listen sockets - if none set, Kamailio binds to all local IP addresses * - basic prototype (full prototype can be found in Wiki - Core Cookbook): * listen=[proto]:[localip]:[lport] advertise [publicip]:[pport] * - it can be set many times to add more sockets to listen to */
listen=tcp:127.0.0.1:5060 listen=tcp:10.192.32.185:5060
/* life time of TCP connection when there is no traffic * - a bit higher than registration expires to cope with UA behind NAT */ tcp_connection_lifetime=3605
/* upper limit for TCP connections (it includes the TLS connections) */ tcp_max_connections=2048
#!ifdef WITH_JSONRPC tcp_accept_no_cl=yes #!endif
#!ifdef WITH_TLS enable_tls=yes
/* upper limit for TLS connections */ tls_max_connections=2048 #!endif
/* set it to yes to enable sctp and load sctp.so module */ enable_sctp=no
####### Custom Parameters #########
/* These parameters can be modified runtime via RPC interface * - see the documentation of 'cfg_rpc' module. * * Format: group.id = value 'desc' description * Access: $sel(cfg_get.group.id) or @cfg_get.group.id */
#!ifdef WITH_PSTN /* PSTN GW Routing * * - pstn.gw_ip: valid IP or hostname as string value, example: * pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" * * - by default is empty to avoid misrouting */ pstn.gw_ip = "" desc "PSTN GW Address" pstn.gw_port = "" desc "PSTN GW Port" #!endif
#!ifdef WITH_VOICEMAIL /* VoiceMail Routing on offline, busy or no answer * * - by default Voicemail server IP is empty to avoid misrouting */ voicemail.srv_ip = "" desc "VoiceMail IP Address" voicemail.srv_port = "5060" desc "VoiceMail Port" #!endif
####### Modules Section ########
/* set paths to location of modules */ mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/" # mpath="/usr/local/lib64/kamailio/modules/" #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif
#!ifdef WITH_JSONRPC loadmodule "xhttp.so" #!endif loadmodule "jsonrpcs.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "textopsx.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "acc.so" loadmodule "counters.so" loadmodule "rtpengine.so" loadmodule "uac.so"
#!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif
#!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif
#!ifdef WITH_SPEEDDIAL loadmodule "speeddial.so" #!endif
#!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif
#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif
#!ifdef WITH_NAT loadmodule "nathelper.so" #!else loadmodule "rtpproxy.so" #!endif
#!ifdef WITH_TLS loadmodule "tls.so" #!endif
#!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif
#!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif
# ----------------- setting module-specific parameters ---------------
# ----- jsonrpcs params ----- modparam("jsonrpcs", "pretty_format", 1) /* set the path to RPC fifo control file */ # modparam("jsonrpcs", "fifo_name", "/run/kamailio/kamailio_rpc.fifo") /* set the path to RPC unix socket control file */ # modparam("jsonrpcs", "dgram_socket", "/run/kamailio/kamailio_rpc.sock") #!ifdef WITH_JSONRPC modparam("jsonrpcs", "transport", 7) #!endif
# ----- ctl params ----- /* set the path to RPC unix socket control file */ # modparam("ctl", "binrpc", "unix:/run/kamailio/kamailio_ctl")
# ----- sanity params ----- modparam("sanity", "autodrop", 0)
# ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000)
# ----- rr params ----- # set next param to 1 to add value to ;lr param (helps with some UAs) modparam("rr", "enable_full_lr", 0) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 1)
# ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ # modparam("registrar", "max_contacts", 10) /* max value for expires of registrations */ modparam("registrar", "max_expires", 3600) /* set it to 1 to enable GRUU */ modparam("registrar", "gruu_enabled", 0) /* set it to 0 to disable Path handling */ modparam("registrar", "use_path", 1) /* save Path even if not listed in Supported header */ modparam("registrar", "path_mode", 0)
# ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. * if you enable this parameter, be sure the enable "append_fromtag" * in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif
# ----- usrloc params ----- modparam("usrloc", "timer_interval", 60) modparam("usrloc", "timer_procs", 1) modparam("usrloc", "use_domain", MULTIDOMAIN) /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) #!endif
# ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN)
# ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "load_backends", 1) #!endif
#!endif
# ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif
# ----- speeddial params ----- #!ifdef WITH_SPEEDDIAL modparam("speeddial", "db_url", DBURL) modparam("speeddial", "use_domain", MULTIDOMAIN) #!endif
# ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) /* register callback to match myself condition with domains list */ modparam("domain", "register_myself", 1) #!endif
#!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL)
# ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif
#!ifdef WITH_NAT #!ifdef WITH_RTPENGINE # ----- rtpengine params ----- modparam("rtpengine", "rtpengine_sock", "udp:127.0.0.1:2223") #!else # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") #!endif # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from","sip:pinger@kamailio.org")
# params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif
#!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/etc/kamailio/tls.cfg") #!endif
#!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 16) modparam("pike", "remove_latency", 4)
# ----- htable params ----- /* ip ban htable with autoexpire after 5 minutes */ modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif
#!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) modparam("debugger", "log_level_name", "exec") #!endif
####### Routing Logic ########
/* Main SIP request routing logic * - processing of any incoming SIP request starts with this route * - note: this is the same as route { ... } */ request_route {
# per request initial checks route(REQINIT);
# NAT detection route(NATDETECT);
# CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) { route(RELAY); } exit; }
# handle retransmissions if (!is_method("ACK")) { if(t_precheck_trans()) { t_check_trans(); exit; } t_check_trans(); }
# handle requests within SIP dialogs route(WITHINDLG);
### only initial requests (no To tag)
# authentication route(AUTH);
# record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) { record_route(); }
# account only INVITEs if (is_method("INVITE")) { uac_replace_to("","sip:3000@10.192.60.3"); setflag(FLT_ACC); # do accounting }
if ($rU==$null) { sl_send_reply("484", "Address Incomplete"); exit;
}
$du = "sip:10.192.60.3:5060"; route(RELAY); exit;
}
# dispatch requests to foreign domains # route(SIPOUT);
### requests for my local domains
# handle presence related requests # route(PRESENCE);
# handle registrations # route(REGISTRAR);
# if ($rU==$null) { # request with no Username in RURI # sl_send_reply("484","Address Incomplete"); # exit; # }
# dispatch destinations to PSTN # route(PSTN);
# user location service # route(LOCATION);
# return; #}
# Wrapper for relaying requests route[RELAY] {
# enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o. if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH"); } if (is_method("INVITE|SUBSCRIBE|UPDATE")) { if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY"); } if (is_method("INVITE")) { if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE"); }
if (has_body("application/sdp")) { rtpengine_manage("replace-session-connection replace-origin ICE=remove directi on=internal"); } #t_on_reply("REPLY"); #t_relay();
if (!t_relay()) { sl_reply_error(); } exit; }
# Per SIP request initial checks route[REQINIT] { # no connect for sending replies set_reply_no_connect(); # enforce symmetric signaling # - send back replies to the source address of request force_rport();
#!ifdef WITH_ANTIFLOOD # flood detection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp )\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$s i:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if($ua =~ "friendly|scanner|sipcli|sipvicious|VaxSIPUserAgent|pplsip") { # silent drop for scanners - uncomment next line if want to repl y # sl_send_reply("200", "OK"); exit; }
if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }
if(is_method("OPTIONS") && uri==myself && $rU==$null) { sl_send_reply("200","Keepalive"); exit; }
if(!sanity_check("17895", "7")) { xlog("Malformed SIP request from $si:$sp\n"); exit; } }
# Handle requests within SIP dialogs route[WITHINDLG] { if (!has_totag()) return;
# sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { route(DLGURI); if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fa ils } else if ( is_method("ACK") ) { # ACK is forwarded statelessly route(NATMANAGE); } else if ( is_method("NOTIFY") ) { # Add Record-Route for in-dialog NOTIFY as per RFC 6665. record_route(); } route(RELAY); exit; }
if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server route(RELAY); exit; } else { # ACK without matching transaction ... ignore and discar d exit; } } sl_send_reply("404","Not here"); exit; }
# Handle SIP registrations route[REGISTRAR] { if (!is_method("REGISTER")) return;
if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); #!ifdef WITH_NATSIPPING # do SIP NAT pinging setbflag(FLB_NATSIPPING); #!endif } if (!save("location")) { sl_reply_error(); } exit; }
# User location service route[LOCATION] {
#!ifdef WITH_SPEEDDIAL # search for short dialing - 2-digit extension if($rU=~"^[0-9][0-9]$") { if(sd_lookup("speed_dial")) { route(SIPOUT); } } #!endif
#!ifdef WITH_ALIASDB # search in DB-based aliases if(alias_db_lookup("dbaliases")) { route(SIPOUT); } #!endif
$avp(oexten) = $rU; if (!lookup("location")) { $var(rc) = $rc; route(TOVOICEMAIL); t_newtran(); switch ($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit; case -2: send_reply("405", "Method Not Allowed"); exit; } }
# when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); }
route(RELAY); exit; }
# Presence server processing route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return;
if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") { route(TOVOICEMAIL); # returns here if no voicemail server is configured sl_send_reply("404", "No voicemail service"); exit; }
#!ifdef WITH_PRESENCE #!ifdef WITH_MSGREBUILD # apply changes in case the request headers or body were modified msg_apply_changes(); #!endif if (!t_newtran()) { sl_reply_error(); exit; }
if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if(is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif
# if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; }
# IP authorization and user authentication route[AUTH] { #!ifdef WITH_AUTH
#!ifdef WITH_IPAUTH if((!is_method("REGISTER")) && allow_source_address()) { # source IP allowed return; } #!endif
if (is_method("REGISTER") || from_uri==myself) { # authenticate requests if (!auth_check("$fd", "subscriber", "1")) { auth_challenge("$fd", "0"); exit; } # user authenticated - remove auth header if(!is_method("REGISTER|PUBLISH")) consume_credentials(); } # if caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (from_uri!=myself && uri!=myself) { sl_send_reply("403","Not relaying"); exit; }
#!else
# authentication not enabled - do not relay at all to foreign networks if(uri!=myself) { sl_send_reply("403","Not relaying"); exit; }
#!endif return; }
# Caller NAT detection route[NATDETECT] { #!ifdef WITH_NAT if (nat_uac_test("19")) { if (is_method("REGISTER")) { fix_nated_register(); } else { if(is_first_hop()) { set_contact_alias(); } } setflag(FLT_NATS); } #!endif return; }
# RTPProxy control and signaling updates for NAT traversal route[NATMANAGE] { #!ifdef WITH_NAT if (is_request()) { if(has_totag()) { if(check_route_param("nat=yes")) { setbflag(FLB_NATB); } } } if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return;
#!ifdef WITH_RTPENGINE if(nat_uac_test("8")) { rtpengine_manage("SIP-source-address replace-origin replace-sess ion-connection"); } else { rtpengine_manage("replace-origin replace-session-connection"); } #!else if(nat_uac_test("8")) { rtpproxy_manage("co"); } else { rtpproxy_manage("cor"); } #!endif
if (is_request()) { if (!has_totag()) { if(t_is_branch_route()) { add_rr_param(";nat=yes"); } } } if (is_reply()) { if(isbflagset(FLB_NATB)) { if(is_first_hop()) set_contact_alias(); } }
if(isbflagset(FLB_NATB)) { # no connect message in a dialog involving NAT traversal if (is_request()) { if(has_totag()) { set_forward_no_connect(); } } } #!endif return; }
# URI update for dialog requests route[DLGURI] { #!ifdef WITH_NAT if(!isdsturiset()) { handle_ruri_alias(); } #!endif return; }
# Routing to foreign domains route[SIPOUT] { if (uri==myself) return;
append_hf("P-Hint: outbound\r\n"); route(RELAY); exit; }
# PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN routing enabled but pstn.gw_ip not defined\n" ); return; }
# route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return;
# only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; }
# normalize target number for pstn gateway # - convert leading 00 to + if (starts_with("$rU", "00")) { strip(2); prefix("+"); }
if (strempty($sel(cfg_get.pstn.gw_port))) { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); } else { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":" + $sel(cfg_get.pstn.gw_port); }
route(RELAY); exit; #!endif
return; }
# JSONRPC over HTTP(S) routing #!ifdef WITH_JSONRPC event_route[xhttp:request] { set_reply_close(); set_reply_no_connect(); if(src_ip!=127.0.0.1) { xhttp_reply("403", "Forbidden", "text/html", "<html><body>Not allowed from $si</body></html>" ); exit; } if ($hu =~ "^/RPC") { jsonrpc_dispatch(); exit; }
xhttp_reply("200", "OK", "text/html", "<html><body>Wrong URL $hu</body></html>"); exit; } #!endif
# Routing to voicemail server route[TOVOICEMAIL] { #!ifdef WITH_VOICEMAIL if(!is_method("INVITE|SUBSCRIBE")) return;
# check if VoiceMail server IP is defined if (strempty($sel(cfg_get.voicemail.srv_ip))) { xlog("SCRIPT: VoiceMail routing enabled but IP not defined\n"); return; } if(is_method("INVITE")) { if($avp(oexten)==$null) return;
$ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_i p) + ":" + $sel(cfg_get.voicemail.srv_port); } else { if($rU==$null) return;
$ru = "sip:" + $rU + "@" + $sel(cfg_get.voicemail.srv_ip) + ":" + $sel(cfg_get.voicemail.srv_port); } route(RELAY); exit; #!endif
return; }
# Manage outgoing branches branch_route[MANAGE_BRANCH] { xdbg("new branch [$T_branch_idx] to $ru\n"); route(NATMANAGE); return; }
# Manage incoming replies reply_route { if(!sanity_check("17604", "6")) { xlog("Malformed SIP response from $si:$sp\n"); drop; } return; }
# Manage incoming replies in transaction context onreply_route[MANAGE_REPLY] { xdbg("incoming reply\n"); if(status=~"[12][0-9][0-9]") { route(NATMANAGE); }
#if (has_body("application/sdp")) { # rtpengine_manage(); #}
return; }
# Manage failure routing cases failure_route[MANAGE_FAILURE] { route(NATMANAGE);
if (t_is_canceled()) exit;
#!ifdef WITH_BLOCK3XX # block call redirect based on 3xx replies. if (t_check_status("3[0-9][0-9]")) { t_reply("404","Not found"); exit; } #!endif
#!ifdef WITH_BLOCK401407 # block call redirect based on 401, 407 replies. if (t_check_status("401|407")) { t_reply("404","Not found"); exit; } #!endif
#!ifdef WITH_VOICEMAIL # serial forking # - route to voicemail on busy or no answer (timeout) if (t_check_status("486|408")) { $du = $null; route(TOVOICEMAIL); exit; } #!endif return; } __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions --sr-users@lists.kamailio.org To unsubscribe send an email tosr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender!
I am also observing the same error. in below configuration A.B.C.D is my public IP My kamailio configuration ------------------------------------------------------------------------------------------ #!ifdef WITH_NAT #!ifdef WITH_RTPENGINE # ----- rtpengine params ----- modparam("rtpengine", "rtpengine_sock", "udp:127.0.0.1:2223") #!else # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") modparam("rtpproxy", "force_rtp_proxy", 1) modparam("rtpproxy", "advertised_address", A.B.C.D) #!endif # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org") modparam("nathelper", "natping_socket", "udp:A.B.C.D:5065") modparam("nathelper", "natping_socket", "tcp:A.B.C.D:5066") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif ------------------------------------------------------------------------------------------ RTP Engine ------------------------------------------------------------------------------------------ [rtpengine] table = 0 interface = internal/172.31.10.79;external/A.B.C.D listen-ng = localhost:2223 listen-cli = localhost:2224 timeout = 60 silent-timeout = 30 tos = 184 pidfile = /run/rtpengine/ngcp-rtpengine-daemon.pid fork = yes port-min = 30000 port-max = 40000 log-level = 7 log-facility = local0 kernel = no ------------------------------------------------------------------------------------------
Fixed the issue after adding #!define WITH_RTPENGINE What I understood, this configuration activates the portions of the Kamailio script that configure and use RTPengine.
participants (3)
-
asishp42＠gmail.com -
disa_369＠msn.com -
Richard Fuchs