Hi there my config file is
I have set
modparam("nathelper",
"ping_nated_only", 1)
modparam("registrar",
"nat_flag", 6)
This gives me the following error:
Jan 31 16:47:26 [16380]
ERROR:core:set_mod_param_regex: parameter <nat_flag> not found in module
<registrar>
Jan 31 16:47:26 [16380]
CRITICAL:core:yyerror: parse error in config file, line 173, column 19-20:
Can't set module parameter
If I set
modparam("nathelper",
"ping_nated_only", 0)
and ### modparam("registrar",
"nat_flag", 6)
This allows me to run openser but when I make a call to PSTN
the following warning is sent out
Jan 31 16:55:45 [16484] ERROR:nathelper:send_rtpp_command: can't
connect to RTP proxy
Jan 31 16:55:45 [16484] ERROR:nathelper:send_rtpp_command: proxy
</var/run/rtpproxy.sock> does not respond, disable it
Jan 31 16:55:45 [16484] WARNING:nathelper:rtpp_test: can't
get version of the RTP proxy
Jan 31 16:55:45 [16484] WARNING:nathelper:rtpp_test: support
for RTP proxy </var/run/rtpproxy.sock> has been disabled temporarily
Calls between softphones work but a call to the PSTN ends up
with the following
Jan 31 16:57:26 [16509] DBG:core:grep_sock_info: checking if
port 5060 matches port 5060
International PSTN
Jan 31 16:57:26 [16509] DBG:core:parse_headers: flags=80
Jan 31 16:57:26 [16509] DBG:core:parse_headers: flags=ffffffffffffffff
Jan 31 16:57:26 [16509] DBG:nathelper:check_content_type: type
<application/sdp> found valid
Jan 31 16:57:26 [16509] DBG:core:parse_headers: flags=40
=èJan 31 16:57:26 [16509]
ERROR:nathelper:force_rtp_proxy2_f: no available proxies
Routed to PSTN gateway
Jan 31 16:57:26 [16509] DBG:tm:t_unref: UNREF_UNSAFE: after
is 0
Jan 31 16:57:26 [16509] DBG:core:destroy_avp_list: destroying
list (nil)
Jan 31 16:57:26 [16509] DBG:core:receive_msg: cleaning up
Jan 31 16:57:27 [16514] DBG:tm:utimer_routine: timer routine:4,tl=0x406ddf7c
next=(nil), timeout=25100000
Jan 31 16:57:27 [16514] DBG:tm:retransmission_handler: retransmission_handler
: request resending (t=0x406dde30, INVITE si ... )
Jan 31 16:57:27 [16514] DBG:tm:set_timer: relative timeout
is 1000000
Jan 31 16:57:27 [16514] DBG:tm:insert_timer_unsafe: [5]: 0x406ddf7c
(26100000)
Jan 31 16:57:27 [16514] DBG:tm:retransmission_handler: retransmission_handler
: done
Jan 31 16:57:28 [16514] DBG:tm:utimer_routine: timer routine:5,tl=0x406ddf7c
next=(nil), timeout=26100000
Jan 31 16:57:28 [16514] DBG:tm:retransmission_handler: retransmission_handler
: request resending (t=0x406dde30, INVITE si ... )
If I use tcpdump I don’t see any traffic leaving for
my PSTN GW.
With Regards
Ali Jawad
System Administrator
Splendor Telecom (www.splendor.net)
Phone: +961 1 373725
Fax: + 961 1 375554