Hello, I think I tried everything to get asterisk let registration be allowed. I set insecure=port,invite on the main trunk from kamailio, for every friend (every user) which register is forwarded..Asterisk keeps sending 401 Unauthorized. Is there any trick about it?
On Wed, Oct 13, 2010 at 1:59 PM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:
in Asterisk you have to accept SIP traffic coming from kamailio
without authentication (e.g., based on source ip/port).
Cheers,
Daniel
On 10/13/10 1:38 PM, Borin wrote:
Is kamailio supposed to send WWW-Authenticate header
back to asterisk after it gets SIP/2.0 401 Unauthorized?
kamailio authenticates user , sends REGISTER to asterisk, after
getting "Unauthorized" sends another REGISTER with the same
headers and, as the second REGISTER does not contain
WWW-Authenticate: Digest algorithm=MD5, realm="blabla",
nonce="56c213f9", Asterisk does not register this user.
hello again
sorry for stupid question, but I can't get
this definition working. I have ver 3.1 of
kamailio, the definitions don't work as it
described in the manual.
asterisk.bindip="asterisk.ip" desc "Asterisk IP Address"
asterisk.bindport="5080" desc "Asterisk Port"
kamailio.bindip="kamailio.ip" desc "Kamailio IP Address"
kamailio.bindport="5060" desc "Kamailio Port"
kamailio (ver 3.1 ) sais after restart I have syntax error
Oct 13 08:40:13 voip-test kamailio: : <core> [cfg.y:3412]: yyerror_at(): parse error in config file /usr/local/kamailio-3.1/etc/kamailio-pbx/kamailio.cfg, line 43, column 17: syntax error
Oct 13 08:40:13 voip-test kamailio: : <core> [cfg.y:3412]: yyerror_at(): parse error in config file /usr/local/kamailio-3.1/etc/kamailio-pbx/kamailio.cfg, line 43, column 17: unknown config variable
Oct 13 08:40:13 voip-test kamailio: : <core> [cfg.y:3409]: yyerror_at(): parse error in config file /usr/local/kamailio-3.1/etc/kamailio-pbx/kamailio.cfg, line 43, column 19-33:
Thanks, Lucas. That
is exactly what I was looking for
On Tue, Oct
12, 2010 at 5:47 PM, Lucas Alvarez <lucasaa@gmail.com>
wrote:
Hello,
here is How-To written by
Daniel-Constantin Mierla of a
Kamailio-Asterisk integration: http://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb,
check the .cfg file posted there.
Actually I followed up that
tutorial and I have the extensions
registered both on Asterisk and
Kamailio. I hope this can be
useful.
Hello,
I am not good at
kamailio. Could anyone
tell me how can I
forward register
messages coming to
kamailio to asterisk? I
need users to be
registered on kamailio
and on asterisk at one
time.
I do in kamailio.cfg:
if
(is_method("REGISTER"))
{
save("location");
route(FWD_REG);
exit;