Hello,
On 24/05/16 10:09, Loic Chabert wrote:
but then how the DNS is returning the appropriate server? Or each user has a different domain?Hello,I can't use load balancing feature because location of sip user is defined.
The probably you can use mtree to associate dids with ip addresses (or dispatcher set ids).One DID is routed to one server. One to one relationship.
I will use LCR for outgoing call. LCR will "help" CBx to find best carrier following rules defined by administrators. LCR can probe gateways ? I have set ping_interval etc but ping is not sent by kamailio.So if loadblancer send phone call on one server, but user is not registred on this one, call is hangup/lost.
I don't know if lcr can ping gateways. I know dispatcher does it.
Cheers,
Daniel
Regards.
2016-05-23 14:36 GMT+02:00 Daniel-Constantin Mierla <miconda@gmail.com>:
Hello,
dns naptr is ok for locating servers as long as you control the local infrastructure and make sure dns changes propagation is done right.
An alternative would be using dispatcher module as a load balancer. It has a lot of features for this use case, different distribution algorithms as well as probing the servers (CBx) to see which one is available.
If the perfomrance is the concern, keeping most of the processing inside the kamailio is a good choice.
Cheers,
Daniel
On 23/05/16 10:27, Loic Chabert wrote:
Kamailio will be my central routing engine, between SBC (running on asterisk), and somes boxes (asterisk too) where customers will be registred. Please find below my future infrastructure:Hello Kamailio users,I'm working on a sip infrastructure, with opensource technologies, and of course Kamailio will run on my new infrastructure :)
---------- -------------- -------- ----------------| SBC1 | - - - - - | - - - -| kamailio1 |- - - - - | - - - - - | CB1 |-----------------| SIPPHONE |---------- | -------------- | -------- ----------------| |
---------- | | --------
| SBC2 | - - - - - | | - - - - - | CB2 |
---------- | | --------
| -------------- |
---------- | - - - -| kamailio2 |- - - - -| --------
| SBCn |- - - - - | -------------- | - - - - - | CBn |
---------- | | --------
Kamailio high availabality will be done with loopback address and BGP in two datacenters. SIP carriers will be connected to SBC and customer to one CB.
I have made some tests with kamailio, and i use LCR to route call from CB to SBC, using wheigt and prorities to send call to carriers.
Then, when a call arrived from carriers, i use DNS NATPER lookup to find the right CB box.
CB HA is done using DNS SRV. So user is registred at one location, and only one. No location sharing beetwen boxes.
I have some question concerning my architecture, and technologies used to routing call.
Is LCR is the best option for routing call between multiple carriers ? DNS NAPTER is a modern solution to find an endpoint on this architecture ? Existing a better way to route call with kamailio, for exemple rt-json and curl ?
In my point of view, kamailio should be a routing engine, using internal technologies, to maximise performances. Less work with kamailio and external app, best performances in sip routing. Is it the good vision ?
Thanks in advance.
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference, Berlin, May 18-20, 2016 - http://www.kamailioworld.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla http://www.asipto.com - http://www.kamailio.org http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda