Daniel thank you, now dr_reload working.
From: Daniel-Constantin Mierla
[mailto:miconda@gmail.com]
Sent: Wednesday, January 27, 2010 2:57 PM
To: Denis Putyato
Cc: users@lists.kamailio.org
Subject: Re: [Kamailio-Users] TM module
On 1/27/10 12:13 PM, Denis Putyato wrote:
Daniel thank you very much.
In documentation sl stays with “No dependencies on other
Kamailio modules”
the doc needs to be updated. As said, in this particular case is not an error
just disables a feature.
I updated kamailio_3.0 branch to register mi commands from drouting module,
please pull the git and try again. Let me know if works now.
Thanks,
Daniel
From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: Wednesday, January 27, 2010 2:04 PM
To: Denis Putyato
Cc: users@lists.kamailio.org
Subject: Re: [Kamailio-Users] TM module
sl tries to bind to tm for send_reply() function.
The function can detect whether transaction was created and uses t_relply() in
that case instead of sl_send_reply() (of course, if sl can bind to tm module).
sl will print a warning. Probably the message in tm should not be printed as
error anymore and let the module that tries to bind to decide whether is error
if it must bine, or warning if just disables some features.
Cheers,
Daniel
On 1/27/10 11:57 AM, Denis Putyato wrote:
Daniel, I already discovered about milisec. Thank you.
What about error:
loadmodule "db_mysql.so"
loadmodule "mi_fifo.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "acc.so"
loadmodule "avpops.so"
loadmodule "siptrace.so"
loadmodule "dialplan.so"
loadmodule "lcr.so"
loadmodule "sqlops.so"
loadmodule "carrierroute.so"
loadmodule "drouting.so"
loadmodule "kex.so"
From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: Wednesday, January 27, 2010 1:46 PM
To: Denis Putyato
Cc: users@lists.kamailio.org
Subject: Re: [Kamailio-Users] TM module
Hello,
On 1/27/10 9:37 AM, Denis Putyato wrote:
Hello everybody!
ERROR: tm [tm_load.c:47]: tm:load_tm:
Module not initialized yet, make sure that all modules that need tm module are
loaded after tm in the configuration file
Kamailio 3.0 was installed from GIT.
Kamailio starts success. But the error
appears. I think because of this I have a problem with making a call
through kamailio. Calls were failed because kamailio send CANCEL or 487 code
immediately after send INVITE to some outgoing gateways (after t_relay() has
been made).
Is this really need load all modules for tm
working properly? I read documentation and fount that almost all modules that
need tm loaded do not need in my config.
do
you have #!KAMAILIO line at the beginning of your config? In 3.0.0 tm timeouts
are in miliseconds, de directive I mentioned checks if you have it too low, it
increases it accordingly (case of updating the config without paying attention
to timeout value changes).
If you list the modules that you load, I can spot which one depends on tm and
is loaded before.
Cheers,
Daniel
--
Daniel-Constantin Mierla
* http://www.asipto.com/
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
--
Daniel-Constantin Mierla
* http://www.asipto.com/
--
Daniel-Constantin Mierla
* http://www.asipto.com/