Hello,

 

you did install the kamailio debugging symbols from the package management, right?

 

Cheers,

 

Henning

 

From: Muhammad Danish Moosa <danishmoosa@gmail.com>
Sent: Mittwoch, 8. März 2023 09:50
To: Henning Westerholt <hw@gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Kamailio stops processing the calls - restart fixes it.

 

Hi ,

 

I will apply memory config and will monitor.

 

Strangely I dont see any errors related to memory in logs  and nagios graph does not show any spikes.There are only 30 concurrent calls.

 

But in bt full suggests those ‘ no symbol table’ messages. Hopefully memory optimisation will solve it.

 

On Wed, 8 Mar 2023 at 7:23 pm, Henning Westerholt <hw@gilawa.com> wrote:

Hello,

 

you can check with „ps” to see the configured values for Kamailio.

On Debian you can adapt it in /etc/default/kamailio

 

For PKG pool, using 16 MB should be usually fine. For SHM pool, you could use 1GB, depending on the server memory. Much more is usually not needed. You should see some memory related errors in case you run into a low memory situation in the log files.

 

Cheers,

 

Henning

 

From: Muhammad Danish Moosa <danishmoosa@gmail.com>
Sent: Mittwoch, 8. März 2023 09:11
To: Henning Westerholt <hw@gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Kamailio stops processing the calls - restart fixes it.

 

 

Hi Henning,

 

Thanks for your email.

 

Oh , I have not done the explicit config for shared and private memory pool. Where can i see the related documentation?

 

For 8G RAM , I am happy to allocate 5G for Kamailio. What config do you recommend?

 

 

On Wed, 8 Mar 2023 at 6:01 pm, Henning Westerholt <hw@gilawa.com> wrote:

Hello,

Just to sort out some easier reasons: do you increased the shared memory pool and private memory pool in your configuration? The defaults are pretty low.

Cheers,

Henning

--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com


-----Original Message-----
From: Muhammad Danish Moosa <danishmoosa@gmail.com>
Sent: Mittwoch, 8. März 2023 02:21
To: Henning Westerholt <hw@gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Kamailio stops processing the calls - restart fixes it.

Hi Guys,

While I am still testing v 5.6.4 on my lab, Production server (v
5.5.3) became unresponsive again. I took "bt full" to all processes and have been analysing that. It looks like a memory allocation issue.
I see frequent occurrences of "No symbol table info available". This is a purpose specific server with plenty of resources available including 8G RAM and hardly a fraction of that is used.  Only main services are redis and Kamailio. I am not using mysql as well. It has only 30-40 concurrent calls.  .

I have seen selinux is permissive and uimits has liberated values. Do I need to do any other special OS level settings? Or is it really a version upgrade required? Should I get rid of KEMI or do config directly in the cfg file?

I had seen another user reported that issue
https://github.com/kamailio/kamailio/issues/2380 and was advised to use v 5.3.5,


This is pretty strange because I had experience with opensips before , even with the very old version it used to handle 3k calls and literally several years of non-interruptive function without a single restart or fine tuning etc. Not sure I can attach the logs here , please see the excerpts below.


Excerpts from bt full:

Using host libthread_db library "/lib64/libthread_db.so.1".
0x00007f5ec46fc980 in __pause_nocancel () from /lib64/libc.so.6
#0  0x00007f5ec46fc980 in __pause_nocancel () from /lib64/libc.so.6 No symbol table info available.
#1  0x000000000042dec6 in main_loop () at main.c:1904
        i = 8
        pid = 22833
        si = 0x0
        si_desc = "udp receiver child=7
sock=10.10.16.240:5060\000:\000\000\000\001\000\000\000\376\177\000\000\260\232\000\000\000\000\000\000\300\305E\001\000\000\000\000\300\351\202\000k\000\000\000[̀",
'\000' <repeats 13 times>,
"\340\311\337\333\376\177\000\000\030\342}\000\000\000\000\000\027\000\000\000\000\000\000\000@\300A\000\000\000\000"
        nrprocs = 8
        woneinit = 1
        __FUNCTION__ = "main_loop"
#2  0x000000000043684b in main (argc=5, argv=0x7ffedbdfcac8) at main.c:3053
        cfg_stream = 0x1456040
        c = -1
        r = 0
        tmp = 0x0
        tmp_len = 0
        port = 0
        proto = 0
        ahost = 0x0
        aport = 0
        options = 0x7e1208
":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:"
        ret = -1
        seed = 2616789248
        rfd = 4
        debug_save = 0
        debug_flag = 0
        dont_fork_cnt = 0
        n_lst = 0x7ffedbdfc980
        p = 0x0
        st = {st_dev = 19, st_ino = 21232, st_nlink = 2, st_mode = 16832, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1675551785, tv_nsec = 549443593}, st_mtim = {tv_sec = 1677547400, tv_nsec = 664002717}, st_ctim = {tv_sec = 1677547400, tv_nsec = 664002717}, __unused = {0, 0, 0}}
        tbuf = "\377\377\377\377", '\000' <repeats 12 times>, "\350sd\304^\177\000\000\310d3\305^\177", '\000' <repeats 90 times>, "\200\022\254\000\000\000\000\000\200\304A\000\000\000\000\000\300\312\337\333\376\177",
'\000' <repeats 26 times>, "\356=\023\305^\177\000\000\001", '\000'
<repeats 23 times>...
        option_index = 0
        long_options = {{name = 0x7e361f "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x7de694 "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0x7e3624 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0x7e362a "subst", has_arg = 1, flag = 0x0, val = 1025}, {name = 0x7e3630 "substdef", has_arg = 1, flag = 0x0, val = 1026}, {name = 0x7e3639 "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0x7e3643 "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0x7e364d "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, {name = 0x7e3658 "modparam", has_arg = 1, flag = 0x0, val = 1030}, {name = 0x7e3661 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, {name = 0x7e366c "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0x7e3672 "cfg-print", has_arg = 0, flag = 0x0, val = 1033}, {name = 0x7e367c "atexit", has_arg = 1, flag = 0x0, val = 1034}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}}
        __FUNCTION__ = "main"
[Inferior 1 (process 22811) detached]




x00007f5ec47437fc in __lll_lock_wait_private () from /lib64/libc.so.6
#0  0x00007f5ec47437fc in __lll_lock_wait_private () from /lib64/libc.so.6 No symbol table info available.
#1  0x00007f5ec46bfba2 in _L_lock_16654 () from /lib64/libc.so.6 No symbol table info available.
#2  0x00007f5ec46bc7e3 in malloc () from /lib64/libc.so.6 No symbol table info available.
#3  0x00007f5ec46aea6a in open_memstream () from /lib64/libc.so.6 No symbol table info available.
#4  0x00007f5ec472f65a in __vsyslog_chk () from /lib64/libc.so.6 No symbol table info available.
#5  0x00007f5ec472fbbf in syslog () from /lib64/libc.so.6 No symbol table info available.
#6  0x0000000000424070 in sig_usr (signo=17) at main.c:920
        __llevel = 3
        memlog = 0
        __FUNCTION__ = "sig_usr"
#7  <signal handler called>
No symbol table info available.
#8  0x00007f5ec46b9094 in _int_malloc () from /lib64/libc.so.6 No symbol table info available.
#9  0x00007f5ec46bc78c in malloc () from /lib64/libc.so.6 No symbol table info available.
#10 0x00007f5ec241fd0e in luaM_realloc_ () from /lib64/liblua-5.1.so No symbol table info available.
#11 0x00007f5ec24239b8 in luaS_newlstr () from /lib64/liblua-5.1.so No symbol table info available.
#12 0x00007f5ec2417b5a in lua_pushlstring () from /lib64/liblua-5.1.so No symbol table info available.
#13 0x00007f5ec2427ad3 in emptybuffer () from /lib64/liblua-5.1.so No symbol table info available.
#14 0x00007f5ec24288b9 in luaL_pushresult () from /lib64/liblua-5.1.so No symbol table info available.
#15 0x00007f5ec242bb0b in read_chars () from /lib64/liblua-5.1.so No symbol table info available.
#16 0x00007f5ec242bd32 in g_read () from /lib64/liblua-5.1.so No symbol table info available.
#17 0x00007f5ec241c324 in luaD_precall () from /lib64/liblua-5.1.so No symbol table info available.
#18 0x00007f5ec2426e57 in luaV_execute () from /lib64/liblua-5.1.so No symbol table info available.
#19 0x00007f5ec241c74d in luaD_call () from /lib64/liblua-5.1.so No symbol table info available.
#20 0x00007f5ec241ba6e in luaD_rawrunprotected () from /lib64/liblua-5.1.so No symbol table info available.
#21 0x00007f5ec241c8da in luaD_pcall () from /lib64/liblua-5.1.so No symbol table info available.
#22 0x00007f5ec241844d in lua_pcall () from /lib64/liblua-5.1.so No symbol table info available.
#23 0x00007f5ec2660cbc in app_lua_run_ex (msg=0x7f5ec3f20a78, func=0x7f5ec26804ae "ksr_request_route", p1=0x0, p2=0x0, p3=0x0,
emode=1) at app_lua_api.c:713
        n = 0
        ret = 0
        txt = {s = 0x7ffedbdfbb38 "Z\336P", len = 22679472}
        bmsg = 0x0
        ltop = 17
        __FUNCTION__ = "app_lua_run_ex"
#24 0x00007f5ec264a6c9 in sr_kemi_config_engine_lua (msg=0x7f5ec3f20a78, rtype=1, rname=0x0, rparam=0x0) at
app_lua_mod.c:119
        ret = -1
        __FUNCTION__ = "sr_kemi_config_engine_lua"
#25 0x00000000004a2592 in sr_kemi_route (keng=0xae6060 <_sr_kemi_eng_list>, msg=0x7f5ec3f20a78, rtype=1, ename=0x0,
edata=0x0) at core/kemi.c:3471
        sfbk = 0
        ret = 7
#26 0x00000000005dc9aa in receive_msg (buf=0xad0020 <buf.7142> "REFER sip:192.168.10.100:5060;transport=tcp SIP/2.0\r\nVia: SIP/2.0/UDP
192.168.10.184:5060;branch=z9hG4bK04B64e74bc7ae4d17c8\r\nVIA:
SIP/2.0/TLS 52.114.20.29:5061;branch=z9hG4bK2280db05\r\nFrom: \"Danish Queue\""..., len=1366, rcv_info=0x7ffedbdfc200) at core/receive.c:488
        msg = 0x7f5ec3f20a78




Using host libthread_db library "/lib64/libthread_db.so.1".
0x00007f5ec47437fc in __lll_lock_wait_private () from /lib64/libc.so.6
#0  0x00007f5ec47437fc in __lll_lock_wait_private () from /lib64/libc.so.6 No symbol table info available.
#1  0x00007f5ec46bfba2 in _L_lock_16654 () from /lib64/libc.so.6 No symbol table info available.
#2  0x00007f5ec46bc7e3 in malloc () from /lib64/libc.so.6 No symbol table info available.
#3  0x00007f5ec46aea6a in open_memstream () from /lib64/libc.so.6 No symbol table info available.
#4  0x00007f5ec472f65a in __vsyslog_chk () from /lib64/libc.so.6 No symbol table info available.
#5  0x00007f5ec472fbbf in syslog () from /lib64/libc.so.6 No symbol table info available.
#6  0x0000000000424070 in sig_usr (signo=17) at main.c:920
        __llevel = 3
        memlog = 0
        __FUNCTION__ = "sig_usr"
#7  <signal handler called>
No symbol table info available.
#8  0x00007f5ec46b908a in _int_malloc () from /lib64/libc.so.6 No symbol table info available.
#9  0x00007f5ec46bc78c in malloc () from /lib64/libc.so.6 No symbol table info available.
#10 0x00007f5ec241fd0e in luaM_realloc_ () from /lib64/liblua-5.1.so No symbol table info available.
#11 0x00007f5ec24239b8 in luaS_newlstr () from /lib64/liblua-5.1.so No symbol table info available.
#12 0x00007f5ec2417b5a in lua_pushlstring () from /lib64/liblua-5.1.so No symbol table info available.
#13 0x00007f5ec2427ad3 in emptybuffer () from /lib64/liblua-5.1.so No symbol table info available.
#14 0x00007f5ec24288b9 in luaL_pushresult () from /lib64/liblua-5.1.so No symbol table info available.
#15 0x00007f5ec242bb0b in read_chars () from /lib64/liblua-5.1.so No symbol table info available.
#16 0x00007f5ec242bd32 in g_read () from /lib64/liblua-5.1.so No symbol table info available.
#17 0x00007f5ec241c324 in luaD_precall () from /lib64/liblua-5.1.so No symbol table info available.
#18 0x00007f5ec2426e57 in luaV_execute () from /lib64/liblua-5.1.so No symbol table info available.
#19 0x00007f5ec241c74d in luaD_call () from /lib64/liblua-5.1.so No symbol table info available.
#20 0x00007f5ec241ba6e in luaD_rawrunprotected () from /lib64/liblua-5.1.so No symbol table info available.
#21 0x00007f5ec241c8da in luaD_pcall () from /lib64/liblua-5.1.so No symbol table info available.
#22 0x00007f5ec241844d in lua_pcall () from /lib64/liblua-5.1.so No symbol table info available.
#23 0x00007f5ec2660cbc in app_lua_run_ex (msg=0x7f5ec3f26158, func=0x7f5ec26804ae "ksr_request_route", p1=0x0, p2=0x0, p3=0x0,
emode=1) at app_lua_api.c:713
        n = 0
        ret = 0
        txt = {s = 0x7ffedbdfbb38 "Z\336P", len = 22689984}
        bmsg = 0x0
        ltop = 17
        __FUNCTION__ = "app_lua_run_ex"
#24 0x00007f5ec264a6c9 in sr_kemi_config_engine_lua (msg=0x7f5ec3f26158, rtype=1, rname=0x0, rparam=0x0) at
app_lua_mod.c:119
        ret = -1
        __FUNCTION__ = "sr_kemi_config_engine_lua"
#25 0x00000000004a2592 in sr_kemi_route (keng=0xae6060 <_sr_kemi_eng_list>, msg=0x7f5ec3f26158, rtype=1, ename=0x0,
edata=0x0) at core/kemi.c:3471
        sfbk = 0
        ret = 7
#26 0x00000000005dc9aa in receive_msg (buf=0xad0020 <buf.7142> "REFER sip:192.168.10.100:5060;transport=tcp SIP/2.0\r\nVia: SIP/2.0/UDP
192.168.10.184:5060;branch=z9hG4bK08B977c11fc3b3ee498\r\nVIA:
SIP/2.0/TLS 52.114.20.29:5061;branch=z9hG4bKed64125d\r\nFrom: \"Danish Queue\""..., len=1372, rcv_info=0x7ffedbdfc200) at core/receive.c:488
        msg = 0x7f5ec3f26158
        ctx = {rec_lev = 259, run_flags = 0, last_retcode = 1677719528, jmp_env = {{__jmpbuf = {8717649, 0, 2, 0, 22808048, 0, 0, 140045002453120}, __mask_was_saved = 8, __saved_mask = {__val = {8589934604, 528280977410, 257698037764, 1, 39600, 21349824, 0, 0, 0, 140732587295568, 8311117, 4309056, 8573144, 1372, 140044999523263, 0}}}}}
        bctx = 0x0
        ret = 0
        tvb = {tv_sec = 1677719528, tv_usec = 404766}
        tve = {tv_sec = 0, tv_usec = 0}
        diff = 0
        inb = {s = 0xad0020 <buf.7142> "REFER sip:192.168.10.100:5060;transport=tcp SIP/2.0\r\nVia: SIP/2.0/UDP
192.168.10.184:5060;branch=z9hG4bK08B977c11fc3b3ee498\r\nVIA:
SIP/2.0/TLS 52.114.20.29:5061;branch=z9hG4bKed64125d\r\nFrom: \"Danish Queue\""..., len = 1372}
        netinfo = {data = {s = 0x0, len = 0}, rcv = 0x0, dst = 0x0}
        keng = 0xae6060 <_sr_kemi_eng_list>
        evp = {data = 0x7ffedbdfbd30, obuf = {s = 0x0, len = 0}, rcv = 0x7ffedbdfc200, dst = 0x0, req = 0x0, rpl = 0x0, rplcode = 0, mode = 0}
        cidlockidx = 0
        cidlockset = 0
        errsipmsg = 0
        exectime = 1
        __FUNCTION__ = "receive_msg"
#27 0x000000000047e32e in udp_rcv_loop () at core/udp_server.c:543
        len = 1372
        buf = "REFER sip:192.168.10.100:5060;transport=tcp
SIP/2.0\r\nVia: SIP/2.0/UDP
192.168.10.184:5060;branch=z9hG4bK08B977c11fc3b3ee498\r\nVIA:
SIP/2.0/TLS 52.114.20.29:5061;branch=z9hG4bKed64125d\r\nFrom: \"Danish Queue\""...
        tmp = 0x7f5ebd6c48f0 ""
        fromaddr = 0x7f5ec3eec738
        fromaddrlen = 16
        rcvi = {src_ip = {af = 2, len = 4, u = {addrl = {3088058890, 0}, addr32 = {3088058890, 0, 0, 0}, addr16 = {2570, 47120, 0, 0, 0, 0, 0, 0}, addr = "\n\n\020\270", '\000' <repeats 11 times>}}, dst_ip = {af = 2, len = 4, u = {addrl = {4027582986, 0}, addr32 = {4027582986, 0, 0, 0}, addr16 = {2570, 61456, 0, 0, 0, 0, 0, 0}, addr = "\n\n\020\360", '\000' <repeats 11 times>}}, src_port = 5060, dst_port = 5060, proto_reserved1 = 0, proto_reserved2 = 0, src_su = {s = {sa_family = 2, sa_data = "\023\304\n\n\020\270\000\000\000\000\000\000\000"}, sin = {sin_family = 2, sin_port = 50195, sin_addr = {s_addr = 3088058890}, sin_zero = "\000\000\000\000\000\000\000"}, sin6 = {sin6_family = 2, sin6_port = 50195, sin6_flowinfo = 3088058890, sin6_addr = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0},
__u6_addr32 = {0, 0, 0, 0}}}, sin6_scope_id = 0}, sas = {ss_family = 2, __ss_padding = "\023\304\n\n\020\270", '\000' <repeats 111 times>, __ss_align = 0}}, bind_address = 0x7f5ec3ec6308, rflags = (unknown:
0), proto = 1 '\001', proto_pad0 = 0 '\000', proto_pad1 = 0}
        evp = {data = 0x0, obuf = {s = 0x0, len = 0}, rcv = 0x0, dst = 0x0, req = 0x0, rpl = 0x0, rplcode = 0, mode = 0}
        printbuf = "REFER sip:192.168.10.100:5060;transport=tcp
SIP/2.0 0D  0A Via: SIP/2.0/UDP 192.168.10.184:5060;branch=z9hG4bK0D
\000A \000\300\337\333\376\177\000\000\351\305h\301^\177\000\000\330Ђ\000\000\000\000\000\a\000\000\000\004\000\000\000P\301\337\333\376\177\000\000\267\343T\000\000\000\000\000\360\016\201\000\000\000\000\000\360׀\000\000\000\000\000\004\000\000\000\000\000\000\000\004\000\000\000\004\000\000\000\230\337h\301^\177\000\000\334\001"...
        i = 100
        j = 106
        l = 4
        __FUNCTION__ = "udp_rcv_loop"
#28 0x000000000042b3a5 in main_loop () at main.c:1730
        i = 3
        pid = 0
        si = 0x7f5ec3ec6308
        si_desc = "udp receiver child=3
sock=192.168.10.240:5060\000:\000\000\000\001\000\000\000\376\177\000\000\260\232\000\000\000\000\000\000\300\305E\001\000\000\000\000\300\351\202\000k\000\000\000[̀",
'\000' <repeats 13 times>,
"\340\311\337\333\376\177\000\000\030\342}\000\000\000\000\000\027\000\000\000\000\000\000\000@\300A\000\000\000\000"
        nrprocs = 8
        woneinit = 1
        __FUNCTION__ = "main_loop"
#29 0x000000000043684b in main (argc=5, argv=0x7ffedbdfcac8) at main.c:3053
        cfg_stream = 0x1456040
        c = -1
        r = 0
        tmp = 0x0
        tmp_len = 0
        port = 0
        proto = 0
        ahost = 0x0
        aport = 0
        options = 0x7e1208
":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:"
        ret = -1
        seed = 2616789248
        rfd = 4
        debug_save = 0
        debug_flag = 0
        dont_fork_cnt = 0
        n_lst = 0x7ffedbdfc980
        p = 0x0
        st = {st_dev = 19, st_ino = 21232, st_nlink = 2, st_mode = 16832, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1675551785, tv_nsec = 549443593}, st_mtim = {tv_sec = 1677547400, tv_nsec = 664002717}, st_ctim = {tv_sec = 1677547400, tv_nsec = 664002717}, __unused = {0, 0, 0}}
        tbuf = "\377\377\377\377", '\000' <repeats 12 times>, "\350sd\304^\177\000\000\310d3\305^\177", '\000' <repeats 90 times>, "\200\022\254\000\000\000\000\000\200\304A\000\000\000\000\000\300\312\337\333\376\177",
'\000' <repeats 26 times>, "\356=\023\305^\177\000\000\001", '\000'
<repeats 23 times>...
        option_index = 0

On Fri, Mar 3, 2023 at 12:50 AM Henning Westerholt <hw@gilawa.com> wrote:
>
> Hi Muhammad,
>
> Great, thanks for the feedback. There is also https://rpm.kamailio.org/centos/ - maybe this works for you.
>
> Cheers,
>
> Henning
>
> -----Original Message-----
> From: Muhammad Danish Moosa <danishmoosa@gmail.com>
> Sent: Donnerstag, 2. März 2023 14:50
> To: Henning Westerholt <hw@gilawa.com>
> Cc: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
> Subject: Re: [SR-Users] Kamailio stops processing the calls - restart fixes it.
>
> Hi Henning,
>
> Yes , setting acc_function modparam to an empty string fixed the issue.
>
> Thank you so much.
>
> I am using CentOS Linux release 7.6.1810 (Core) , I had to compile.
>
> On Fri, Mar 3, 2023 at 12:41 AM Henning Westerholt <hw@gilawa.com> wrote:
> >
> > Hello,
> >
> > please keep the list in the mail flow.
> >
> > Have you tried to set the acc_function modparam to an empty string, as commented in the linked issue?
> >
> > modparam("uac_redirect","acc_function","")
> >
> > If you don't need the acc function from the uac_redirect.
> >
> > Regarding the other warnings, they should be fixed - but different compilers can report different warnings, so it's sometimes happening. If they are just warnings, they should not create an issue.
> >
> > If you are using Debian/Ubuntu you can just use the prebuild packages from deb.kamailio.org - you don't need to build by yourself.
> >
> > Cheers,
> >
> > Henning
> >
> > -----Original Message-----
> > From: Muhammad Danish Moosa <danishmoosa@gmail.com>
> > Sent: Donnerstag, 2. März 2023 14:25
> > To: Henning Westerholt <hw@gilawa.com>
> > Subject: Re: [SR-Users] Kamailio stops processing the calls - restart fixes it.
> >
> > Hi,
> >
> > I tried to install 5.6.4
> > (https://www.kamailio.org/pub/kamailio/5.6.4/src/) and get this error.
> >
> >
> > Mar  3 00:05:39 lab-danish /usr/local/sbin/kamailio[24642]: INFO: rr
> > [rr_mod.c:188]: mod_init(): outbound module not available Mar  3 00:05:39 lab-danish /usr/local/sbin/kamailio[24642]: ERROR:
> > uac_redirect [../../modules/acc/acc_api.h:191]: acc_load_api(): cannot find bind_acc Mar  3 00:05:39 lab-danish /usr/local/sbin/kamailio[24642]: ERROR:
> > uac_redirect [uac_redirect.c:259]: redirect_init(): cannot bind to ACC API Mar  3 00:05:39 lab-danish /usr/local/sbin/kamailio[24642]: ERROR:
> > <core> [core/sr_module.c:975]: init_mod(): Error while initializing
> > module uac_redirect
> > (/usr/local/lib64/kamailio/modules/uac_redirect.so)
> >
> > It seems this issue was reported earlier and supposed to be fixed but apparently it's not.
> >
> > https://github.com/kamailio/kamailio/issues/3188
> >
> > Besides that , I had seen warnings during compilation. What should be the most tested and supported version ?
> >
> > Example Warnings:
> >
> > dmq_funcs.c: In function ‘ki_dmq_send_message’:
> > dmq_funcs.c:303:3: warning: missing braces around initializer [-Wmissing-braces]
> >    dmq_peer_t new_peer = {0};
> >    ^
> > dmq_funcs.c:303:3: warning: (near initialization for
> > ‘new_peer.peer_id’) [-Wmissing-braces]
> > dmq_funcs.c: In function ‘ki_dmq_bcast_message’:
> > dmq_funcs.c:373:3: warning: missing braces around initializer [-Wmissing-braces]
> >    dmq_peer_t new_peer = {0};
> >    ^
> > dmq_funcs.c:373:3: warning: (near initialization for
> > ‘new_peer.peer_id’) [-Wmissing-braces]
> > CC (gcc) [M dmq.so]             notification_peer.o
> > CC (gcc) [M dmq.so]             dmq.o
> > dmq.c:61:1: warning: missing braces around initializer
> > [-Wmissing-braces]  sip_uri_t dmq_server_uri = {0};
> >
> > On Wed, Mar 1, 2023 at 7:26 PM Henning Westerholt <hw@gilawa.com> wrote:
> > >
> > > Hello,
> > >
> > > better take the latest one, e.g. 5.6.4 released yesterday. Minor releases only contains bugfixes, documentation enhancements and similar. Only rarely regressions happen. But you should of course test it.
> > >
> > > Cheers,
> > >
> > > Henning
> > >
> > > -----Original Message-----
> > > From: Muhammad Danish Moosa <danishmoosa@gmail.com>
> > > Sent: Mittwoch, 1. März 2023 09:22
> > > To: Henning Westerholt <hw@gilawa.com>
> > > Cc: Kamailio (SER) - Users Mailing List
> > > <sr-users@lists.kamailio.org>
> > > Subject: Re: [SR-Users] Kamailio stops processing the calls - restart fixes it.
> > >
> > > Thank you for your email.
> > >
> > > Is v5.6.1 (July 6, 2022) stable?
> > >
> > > obtained from
> > >
> > > https://www.kamailio.org/pub/kamailio/latest-stable-version-number
> > >
> > >
> > > On Wed, Mar 1, 2023 at 5:50 PM Henning Westerholt <hw@gilawa.com> wrote:
> > > >
> > > > Hello,
> > > >
> > > > hard to say without more information, a backtrace etc... As I first step, I would suggest you to update the system to one of the supported releases, e.g. the latest 5.6.x or 5.5.x.
> > > >
> > > > Cheers,
> > > >
> > > > Henning
> > > >
> > > > -----Original Message-----
> > > > From: Muhammad Danish Moosa <danishmoosa@gmail.com>
> > > > Sent: Mittwoch, 1. März 2023 01:39
> > > > To: sr-users@lists.kamailio.org
> > > > Subject: [SR-Users] Kamailio stops processing the calls - restart fixes it.
> > > >
> > > > Hi,
> > > >
> > > > I have a very simple proxy (stateful) where kamailio acts as a proxy between 2 endpoints. Everything works fine for weeks and suddenly I see kamailio stops responding. From pcap I can see kamailio is not proxying the session progress and bombarding invites to one endpoint without any reason. Even that invite was stripped on the Body part.
> > > >
> > > > Restarting kamailio fixes it immediately. Unfortunately I could not take bt full yet.
> > > >
> > > > Version is
> > > >
> > > > kamailio 5.5.3 (x86_64/linux) 473cef
> > > >
> > > > configuration is very simple , routing is based on tm.t_relay ( based on KEMI).
> > > >
> > > > Any help will be welcome.
> > > >
> > > > Danish
> > > >
> > > >
> > > >
> > > > --
> > > > Muhammad Danish Moosa
> > > > __________________________________________________________
> > > > Kamailio - Users Mailing List - Non Commercial Discussions To
> > > > unsubscribe send an email to sr-users-leave@lists.kamailio.org
> > > > Important: keep the mailing list in the recipients, do not reply only to the sender!
> > > > Edit mailing list options or unsubscribe:
> > >
> > >
> > >
> > > --
> > > Muhammad Danish Moosa
> > >
> > > " The core of mans' spirit comes from new experiences. "___
> > > Christopher McCandless
> >
> >
> >
> > --
> > Muhammad Danish Moosa
> >
> > " The core of mans' spirit comes from new experiences. "___
> > Christopher McCandless
>
>
>
> --
> Muhammad Danish Moosa
>
> " The core of mans' spirit comes from new experiences. "___
> Christopher McCandless



--
Muhammad Danish Moosa

" The core of mans' spirit comes from new experiences. "___ Christopher McCandless

--

Muhammad Danish Moosa

" The core of mans' spirit comes from new experiences. "___ Christopher McCandless

--

Muhammad Danish Moosa

" The core of mans' spirit comes from new experiences. "___ Christopher McCandless